Instrukcja obsługi NEC MDG3-BNDL1

NEC monitor MDG3-BNDL1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla NEC MDG3-BNDL1 (18 stron) w kategorii monitor. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/18
MD211G3
MD211G3 paper manual.indb 1
MD211G3 paper manual.indb 1
MD211G3 paper manual.indb 1
MD211G3 paper manual.indb 1MD211G3 paper manual.indb 1 3/27/12 11:18:27 AM
3/27/12 11:18:27 AM
3/27/12 11:18:27 AM
3/27/12 11:18:27 AM3/27/12 11:18:27 AM
Registration Information
Declaration
Declaration of the Man
Declaration of the Man
Declaration of the Man
Declaration of the Manufacturer
ufacturer
ufacturer
ufacturer
Declaration of the Manufacturer
Means of Conformity
Device Classifi cation: Class I, non-measuring function
Applicable Rules: Annex IX, Rules 1.4 (Section 1)
and 1.1 (Section 3)
Product Name: MD211G3
21.3” Diagnostic Imaging
Grayscale LCD Monitor
Model Number: MD211G3
UMDNS Code: 16-603
NEC Display Solutions Europe GmbH declares that the product
listed is in conformity with the essential requirements and
provisions of the Council Directive 93/42/EEC, including the
amendments of the Council Directive 2007/47/EC, and conforms
to the applicable clauses of the following standards:
– EN 60601-1
– EN 60601-1-2
– EN 61000-3-2
– EN 61000-3-3
NEC Display Solutions Europe GmbH
Landshuter Allee 12-14. 80637 Muenchen, Germany
Canadian Department of Communications Compliance Statement
DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No. 601-1:08.
FCC Information
1. Use the attached specifi ed cables with the MD211G3 grayscale monitor so as not to interfere with radio and television reception.
(1) Please use the supplied power cord or equivalent to ensure FCC compliance.
(2) Please use the supplied shielded video signal cable or DVI-D to DVI-D cable.
Use of other cables and adapters may cause interference with radio and television reception.
2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
Consult your dealer or an experienced radio/TV technician for help.
If necessary, the user should contact the dealer or an experienced radio/television technician for additional suggestions.
The user may nd the following booklet, prepared by the Federal Communications Commission, helpful: “How to Identify and Resolve
Radio-TV Interference Problems.” This booklet is available from the U.S. Government Printing Offi ce, Washington, D.C., 20402,
Stock No. 004-000-00345-4.
Declaration of Conformity
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
U.S. Responsible Party: NEC Display Solutions of America, Inc.
Address: 500 Park Boulevard, Suite 1100
Itasca, Illinois 60143
Tel. No.: (630) 467-3000
Type of Product: Display Monitor
Equipment Classifi cation: Class B Peripheral
Model: MD211G3
We hereby declare that the equipment specifi ed above conforms
to the technical standards as specifi ed in the FCC Rules.
Classifi cation
According to the type of protection against electric shock: CLASS I
According to the degree of protection against electric shock: No applied part
According to the degree of protection against ingress of water as detailed in the current edition of IEC529: IPX0
According to the method of sterilization or disinfection recommended by the manufacturer: Not Specifi ed
According to the degree of safety of application in the presence of a FLAMMABLE AN AESTHETIC MIXTURE WITH AIR or a WITH OXYGEN
OR NITROUS OXIDE: Not AP or APG category
According to the mode of operation: Continuous operation
MD211G3 paper manual.indb 2
MD211G3 paper manual.indb 2
MD211G3 paper manual.indb 2
MD211G3 paper manual.indb 2MD211G3 paper manual.indb 2 3/27/12 11:18:28 AM
3/27/12 11:18:28 AM
3/27/12 11:18:28 AM
3/27/12 11:18:28 AM3/27/12 11:18:28 AM
NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s
top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-
friendly products, and always strive to help defi ne and comply with the latest independent standards from agencies such as
ISO (International Organisation for Standardization).
Disposing of your old NEC product
The aim of recycling is to gain an environmental benefi t by means of re-use, upgrading, reconditioning or reclamation of
material. Dedicated recycling sites ensure that environmentally harmful components are properly handled and securely
disposed. To ensure the best recycling of our products, NEC DISPLAY SOLUTIONS offers a variety of recycling procedures
and gives advice on how to handle the product in an environmentally sensitive way, once it has reached the end of its life.
All required information concerning the disposal of the product and country-specifi c information on recycling facilities can be
found on our following websites:
http://www.nec-display-solutions.com/greencompany/ (in Europe),
http://www.nec-display.com (in Japan) or
http://www.necdisplay.com (in USA).
Energy Saving
This monitor features an advanced energy saving capability. When a VESA Display Power Management Signalling (DPMS)
Standard signal is sent to the monitor, the Energy Saving mode is activated. The monitor enters a single Energy Saving mode.
Mode Power consumption LED colour
Normal Operation Approx. 105 W Green
Energy Saving Mode Less than 2 W Amber
O Mode Less than 1 W Unlit
WEEE Mark (European Directive 2002/96/EC)
Within the European Union
EU-wide legislation, as implemented in each Member State, requires that waste electrical and electronic
products carrying the mark (left) must be disposed of separately from normal household waste. This includes
monitors and electrical accessories, such as signal cables or power cords. When you need to dispose of your
NEC display products, please follow the guidance of your local authority, or ask the shop where you purchased
the product, or if applicable, follow any agreements made between yourself and NEC.
The mark on electrical and electronic products only applies to the current European Union Member States.
Outside the European Union
If you wish to dispose of used electrical and electronic products outside the European Union, please contact your local authority
so as to comply with the correct disposal method.
Manufacturer’s Recycling and Energy Information
MD211G3 paper manual.indb 3
MD211G3 paper manual.indb 3
MD211G3 paper manual.indb 3
MD211G3 paper manual.indb 3MD211G3 paper manual.indb 3 3/27/12 11:18:29 AM
3/27/12 11:18:29 AM
3/27/12 11:18:29 AM
3/27/12 11:18:29 AM3/27/12 11:18:29 AM


Specyfikacje produktu

Marka: NEC
Kategoria: monitor
Model: MDG3-BNDL1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z NEC MDG3-BNDL1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje monitor NEC

NEC

NEC E424 Instrukcja

14 Października 2024
NEC

NEC MD322C8-2 Instrukcja

11 Października 2024
NEC

NEC MultiSync LCD1850E Instrukcja

5 Października 2024
NEC

NEC MultiSync MD213MG Instrukcja

3 Października 2024
NEC

NEC MultiSync E244FL Instrukcja

2 Października 2024
NEC

NEC MDview 202 Instrukcja

2 Października 2024
NEC

NEC AccuSync AS241F Instrukcja

29 Września 2024
NEC

NEC MultiSync E988 Instrukcja

27 Września 2024

Instrukcje monitor

Najnowsze instrukcje dla monitor

Acer

Acer EB321HQUDbmidphx Instrukcja

15 Października 2024
Bauhn

Bauhn APMTR-0624 Instrukcja

15 Października 2024
Acer

Acer KA270H Instrukcja

14 Października 2024
Acer

Acer K272HUL Dbmidpx Instrukcja

14 Października 2024
LG

LG UltraGear 32GS85Q Instrukcja

14 Października 2024
LG

LG UltraGear 27GS85Q Instrukcja

14 Października 2024
Acer

Acer EK220QB Instrukcja

13 Października 2024
Acer

Acer S242HL Instrukcja

12 Października 2024
Asus

Asus VP249HR Instrukcja

12 Października 2024