Instrukcja obsługi Naxa NAS3041


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Naxa NAS3041 (1 stron) w kategorii Kołyska/stacja dokująca. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
NAS-3041
- To skip to the next track, press the right "+/>>" buon once.
- To return to the previous, press the le  "<</-" bu on once.
- To pause playback, press the "Play/Pause" buon found on the top of the
speaker once.
- If you receive a call during music playback, you may press the "Play/Pause"
buon to answer/end the call. Music playback will pause when you receive
a call, and will resume automa cally when the call ends.
PORTABLE SPEAKER & SPEAKERPHONE WITH WIRELESS
BLUETOOTH® TECHNOLOGY
- Do not play music at excessive volume levels as this may damage your hearing
and/or equipment.
- Do not use outdoors in wet or damp environments. Do not use this product
near water (e.g., near a bath tub, washbowl, kitchen sink, laundry tub, in
wet basements, or near a swimming pool and the like).
If you have problems with your speaker, please consult the instruc ons in
this manual, as well as the latest news, alerts, and documentaon which can
be found by vising us on the web at www.naxa.com. If you need further
assistance, please contact Naxa Technical Support.
NAXA Technical Support
2320 East 49th St.
Vernon, CA 90058
hp://www.naxa.com/naxa_support/
Remove product from packaging. Read instrucons carefully before using
the product and retain them for future reference. Retain the packaging to
store the product, or dispose of (or recycle it) safely and properly.
Set the power switch on the boom of the speaker to the "ON" posion.
Wait 2-3 seconds un l the LED light ashes red and blue. The speaker is
now ready to be paired with another device.
Note: The speaker will remain in pairing mode for 1 minute. To place the
unit in pairing mode again, simply turn the speaker o and then on again
using the switch on the boom of the unit.
Your wireless speaker can stream audio from any Bluetooth-enabled device
within 10m (33 feet). Simply follow the steps below:
- Turn the speaker on to place it in Pairing mode (see secon above).
- Set your phone, tablet or other device to search for Bluetooth devices (i.e.,
the speaker).
- When the speaker is found (NAS-3041), select it from the list.
- When the pairing process is complete, the LED will light a steady blue.
- To answer a call on the speaker, press the "Play/Pause" buon on the top
of the speaker. During the call, speak normally; your voice will be picked up
through the built-in microphone.
- To end a call on the speaker, press the "Play/Pause" bu on found on the
top of the speaker.
- You may also answer/end calls by using your phone as you would normally.
- To increase the volume, press and hold the right "+/>>" bu on found on
the front of the speaker.
- To decrease the volume, press and hold the le "<</-" bu on found on the
front of the speaker.
Place speaker in Bluetooth Pairing mode -
Pairing a Bluetooth device with your speaker -
Taking calls on your speaker (when connected to a phone) -
Controlling music playback when connected via Bluetooth -
Portable speaker unit
USB charging cable
Stream audio wirelessly from Bluetooth devices (or connect via a 3.5mm
audio jack)
Answer and make calls with the built-in microphone (requires connecon
with a cellular phone)
Delivers deep, rich sound from a portable and compact design
Built-in baery can be recharged over USB
For your safety
Speci onscaƟ


Specyfikacje produktu

Marka: Naxa
Kategoria: Kołyska/stacja dokująca
Model: NAS3041

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Naxa NAS3041, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Kołyska/stacja dokująca Naxa

Naxa

Naxa NAS-3053 Instrukcja

16 Września 2024
Naxa

Naxa NAS-3105D Instrukcja

16 Września 2024
Naxa

Naxa NAS-3101 Instrukcja

16 Września 2024
Naxa

Naxa NAS-3037 Instrukcja

15 Września 2024
Naxa

Naxa NAS-5006 Instrukcja

15 Września 2024
Naxa

Naxa NAS-3042 Instrukcja

15 Września 2024
Naxa

Naxa NAS-3043 Instrukcja

15 Września 2024
Naxa

Naxa NAS-3099 Instrukcja

15 Września 2024
Naxa

Naxa NAS-3036 Instrukcja

15 Września 2024
Naxa

Naxa NAS-3102 Instrukcja

14 Września 2024

Instrukcje Kołyska/stacja dokująca

Najnowsze instrukcje dla Kołyska/stacja dokująca

Vorago

Vorago KSP-600 Instrukcja

9 Października 2024
Gembird

Gembird DD-U3M2 Instrukcja

9 Października 2024
Urban Factory

Urban Factory HCS02UF Instrukcja

9 Października 2024
Urban Factory

Urban Factory HCS01UF Instrukcja

9 Października 2024
Urban Factory

Urban Factory HCS04UF Instrukcja

9 Października 2024
Urban Factory

Urban Factory HCS03UF Instrukcja

9 Października 2024