Instrukcja obsługi MXL CR-30

MXL mikrofon CR-30

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla MXL CR-30 (2 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
Marshall Electronics
Professional Audio Division
Phone: 310-333-0606 800-800-6608 Fax: 310-333-0688
www.mxlmics.com sales@mxlmics.com
Large Diaphragm Condenser Microphone
Thank you for purchasing the MXL Cr30 large diaphragm condenser
microphone. With proper care, this mic will provide many years of satisfaction.
For best results, please take a few moments to review this literature.
Enjoy your microphone!
The MXL Team
General Characteristics
The MXL Cr30 has a small prole body with a sleek black chrome nish.
It features a 32mm large diaphragm capsule with a xed cardioid pattern,
and a low noise FET preamp with fully balanced transformerless output.
In addition it has a 3 position pad (pre attenuation) switch with settings of
0dB, -10dB and -20 dB. The addition of the pad switch enables the use of
the microphone with sound sources producing very high sound pressure
levels, without overloading the microphones internal circuitry. The MXL
Cr30 delivers power and depth to vocals, as well as capturing the clarity
and smoothness of instrumental performances. Wired with Mogami cable,
the MXL Cr30’s delity and versatility will ensure it is a favorite in your
studio.
Shockmount
The high isolation shockmount may shift during shipping. Simply shift
the elastic bands to center the microphone in the assembly. Be sure that
the wire clamp does not rest on the chassis of the mount, as this impairs
mechanical isolation. Slide the shockmount up the body of the microphone
and stop just below the pad switch for the most secure hold.
Contents
Unpack your MXL Cr30 microphone carefully and verify that all of the
following items are included:
MXL Cr30 microphone
Shockmount
Flight case
If any of these items are missing or damaged, contact the company from
which you purchased the microphone.
Power Requirement
IMPORTANT - This unit requires phantom power at 48 volts, ± 4 volts.
Each unit has been thoroughly checked before shipping, so if you do not
hear sound, check that the phantom power on your mixer or separate
power supply is switched on.
Microphone Cable
This microphone connects to a mixer or preamp via XLR cable (not
included). The microphone cable can have a profound effect on the sound
of any microphone. Even the nest microphones will sound poor if the
interconnect cable allows noise to enter, or causes distortion and loss of
Specications
Warranty
Marshall microphones are guaranteed against defects in material and workmanship
for three years from the date of purchase. Should you encounter any problem with
this unit, promptly contact the company you purchased it from for assistance. The
original dated sales receipt will be necessary for any warranty claim. Do not send
any unit directly to us without prior authorization from our service department.
Warranty coverage is limited to repair or replacement (at our option) of the
microphone, and does not cover incidental damages due to use of this unit, nor
damage caused by accidental misuse of this product.
Frequency Chart Polar Pattern
information. Use only the best microphone cable your budget will allow. We
recommend Mogami cable for the best results.
Care
Dust and foreign material can degrade the performance of a microphone
over time so always store the unit in its case. For vocals closer than 3", use a
pop filter or a foam windscreen to avoid getting moisture on the diaphragm
as this can substantially degrade the microphone’s performance. Store the
microphone in its original packaging in a cool, dry place along with the
included packet of silica gel. These steps will help keep the mic in proper
working order and sounding its best for many years to come.
0
90270
180
Type Condenser pressure gradient mic with large 32mm capsule
Diaphragm Gold-sputtered, 6 micron diaphragm
Frequency Response 20 Hz20kHz
Polar Pattern Cardoid
Sensetivity 25mV/Pa
Impedance 150 ohms
Attenuation Switch (Pad/Pre attenuation) -10 dB, -20 dB
Max SPL for .5% THD 158 dB (with pad set to -20 dB)
S/N Ratio 80 dB (Ref. 1 Pa A-weighted)
Power Requirements Phantom Power 48V ± 4V
Weight 1 lb /498.95g
Size 47mm x 145mm/1.8 in. x 5.7 in.
Metal Finish Black Chrome plated


Specyfikacje produktu

Marka: MXL
Kategoria: mikrofon
Model: CR-30

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z MXL CR-30, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje mikrofon MXL

MXL

MXL CR89 Instrukcja

8 Października 2024
MXL

MXL AC-360-Z V2 Instrukcja

8 Października 2024
MXL

MXL AC-44 Instrukcja

8 Października 2024
MXL

MXL CR21 Instrukcja

8 Października 2024
MXL

MXL Genesis HE Instrukcja

8 Października 2024
MXL

MXL 551 Instrukcja

8 Października 2024
MXL

MXL V87 Instrukcja

8 Października 2024
MXL

MXL 550 Instrukcja

8 Października 2024
MXL

MXL 603 Instrukcja

8 Października 2024
MXL

MXL 991 Instrukcja

8 Października 2024

Instrukcje mikrofon

Najnowsze instrukcje dla mikrofon

Audio-Technica

Audio-Technica BP4073 Instrukcja

15 Października 2024
Power Dynamics

Power Dynamics PD524 Instrukcja

15 Października 2024
Audio-Technica

Audio-Technica AT4060 Instrukcja

14 Października 2024
Pyle

Pyle PDWM8225 Instrukcja

13 Października 2024
AKG

AKG WMS420 Instrukcja

13 Października 2024
Audio-Technica

Audio-Technica BP892xCH Instrukcja

12 Października 2024
Apart

Apart MDS.DEL Instrukcja

10 Października 2024
BOYA

BOYA BY-V4 Instrukcja

9 Października 2024