Instrukcja obsługi Muse M-10 Wekkerradio

Muse Radiobudzik M-10 Wekkerradio

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Muse M-10 Wekkerradio (1 stron) w kategorii Radiobudzik. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
AC power: 230V ~ 50 Hz (CE standard)
DC power: 9V battery type 006P (not provided) for clock back-up system only. An alkaline
type battery is recommended. For optimum performance, this battery should
be replaced every 6 months.
1. Insert the AC power cord (13) into a convenient standard AC wall outlet.
2. Connect the 9V battery inside the compartment at the bottom of the unit (11).
BACK-UP SYSTEM: Ensures that the unit will continue to operate as normal during an
AC power disruption (in order to preserve the battery life the display will not light ). All
clock settings will be kept in the memory, however, the clock time may require adjustment
for exact accuracy. If this battery is not installed, the display will blink to indicate that
you have to redo the time and alarm settings.
GB - 1
GB - 2 GB - 3
LOCATION OF CONTROLS
POWER SUPPLY
SETTING THE TIME
1. Press and hold TIME (6) and press (4) or (5) to adjust to your desired time. Release
TIME (6) to store your setting in memory.
1. Switch the function selector to the ON position (1) and for a better reception, extend the
antenna (12).
2. Adjust the volume (10) and the tone (8) to the desired level.
3. Select your desired radio station (9) and (16).
4. To stop listening to the radio, switch to OFF (1).
LISTENING TO THE RADIO
1. Press and hold the ALARM (7), and press (4) or (5) to adjust your desired alarm time,
then release the ALARM (7) to store your setting in memory.
2. To wake up to the radio follow 1 to 3 in "LISTENING TO THE RADIO", then select the
AUTO position (1). The Alarm indicator will alight (15).
3. To wake up to the alarm sound, select the BUZZER position (1). The Alarm indicator will
alight (15).
SETTING THE ALARM AND WAKE-UP MODE
STOPPING THE ALARM
The alarm is programmed to run for 1hr 59 min.
1. SNOOZE (2): Press to stop the alarm temporarily, the alarm will ring again in 9 min.
2. ALARM (7): The alarm will stop, and will sound again 24 hours later.
3. OFF (1): To turn off the alarm permanently, the alarm LED indicator (15) will go off.
Press SLEEP (3), the sound will come on for 59 min. If you want to change this sleep time,
press and hold SLEEP (3), and use (4) or (5) to adjust to the desired time. If you want to
turn off the music earlier, press SNOOZE (2).
SLEEP TO MUSIC
ATTENTION: To reduce the risk of electric shock, do not remove
the cover. There are no user serviceable parts inside the unit.
Refer all servicing to qualified personnel.
The lightening flash with arrowhead symbol within the triangle is a warning sign
alerting the user of "dangerous voltage" inside the unit.
The exclamation point within the triangle is a warning sign alerting the user of
important instructions accompanying the product.
WARNING
- To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
MORE INFORMATION If at any time in the future you should need to dispose of this product please note
that Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for
recycling advice.(Waste Electrical and Electronic Equipment Directive)
IMPORTANT
M-10CR
User Manual
Digital Alarm Clock Radio
-
-
-
-
-
-
-
-
-
-
-
-
-
Function Selector
Snooze: Alarm repetition
Sleep: On / set
Minute: set
Hour: set
Time: set
Alarm: set / Stop
Tone (High / Low)
Tuning knob
Volume Control
Battery back-up compartment
FM wire antenna
AC Power cord
Digital display
Alarm ON indicator
Dial scale and pointer
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
PLEASE READ THE INSTRUCTION CAREFULLY
BEFORE OPERATING THE UNIT
DO NOT THROW BATTERIES IN FIRE !
THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING.
ENSURE A MINIMUM DISTANCE OF 5CM AROUND THE APPARATUS FOR
SUFFICIENT VENTILATION.
ENSURE THAT THE VENTILATION IS NOT IMPEDED BY COVERING THE
VENTILATION OPENINGS WITH ITEMS, SUCH AS NEWSPAPERS, TABLE-CLOTHS,
CURTAINS, ETC.
DO NOT PLACE NAKED FLAME SOURCES, SUCH AS LIGHTED CANDLES ON THE
APPARATUS.
TAKE ATTANTION TO THE ENVIRONMENTAL ASPECTS OF BATTERY DISPOSAL.
USE THE APPARATUS ONLY IN MODERATE CLIMATES (NOT IN TROPICAL
CLIMATES).
DO NOT EXPOSE THE APPARATUS TO DRIPPING OR SPLASHING.
DO NOT PLACE OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, ON THE
APPARATUS.
BATTERIES SHALL NOT BE EXPOSED TO EXCESSIVE HEAT SUCH AS SUNSHINE,
FIRE OR THE LIKE.
THE MARKING PLATE IS LOCATED ON THE BACK ENCLOSURE.
MAINS PLUG IS USED AS THE DISCONNECT DEVICE AND IT SHALL REMAIN
READILY OPERABLE. TO BE COMPLETELY DISCONNECTED THE POWER INPUT,
THE MAINS PLUG OF THE APPARATUS SHALL BE DISCONNECTED FROM THE
MAINS COMPLETELY.
THE MAINS PLUG SHOULD NOT BE OBSTRUCTED OR SHOULD BE EASILY
ACCESSED DURING INTENDED USE.
UNDER THE INFLUENCE OF ELECTRICAL FAST TRANSIENT OR/AND
ELECTROSTATIC PHENOMENON, THE PRODUCT MAY MALFUNCTION AND
REQUIRE USER TO POWER RESET.
CR-171FM IB MUSE 001 REV0 - GB.p65 2008-8-8, 11:011


Specyfikacje produktu

Marka: Muse
Kategoria: Radiobudzik
Model: M-10 Wekkerradio

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Muse M-10 Wekkerradio, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Radiobudzik Muse

Muse

Muse M-179 P Instrukcja

8 Października 2024
Muse

Muse M-188P Instrukcja

5 Października 2024
Muse

Muse M-17 CB Instrukcja

4 Października 2024
Muse

Muse M-15 GL Instrukcja

27 Września 2024
Muse

Muse M-189 PMR Instrukcja

22 Września 2024
Muse

Muse M-165 Instrukcja

16 Września 2024
Muse

Muse M-186 CMR Instrukcja

16 Września 2024
Muse

Muse M-165 CMR Instrukcja

10 Września 2024
Muse

Muse M-187 CDB Instrukcja

6 Września 2024
Muse

Muse M-189 CDB Instrukcja

5 Września 2024

Instrukcje Radiobudzik

Najnowsze instrukcje dla Radiobudzik

Insignia

Insignia NS-ALCL24 Instrukcja

15 Października 2024
Bearware

Bearware 307021 Instrukcja

9 Października 2024
Bearware

Bearware 307022 Instrukcja

9 Października 2024
Bearware

Bearware 307028 Instrukcja

9 Października 2024
Bearware

Bearware 307023 Instrukcja

9 Października 2024