Instrukcja obsługi Morphy Richards 40701


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Morphy Richards 40701 (8 stron) w kategorii Żelazo. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
Comfigrip iron steam/spray/shot
Please read and keep these instructions
getting the best from your
new iron...
Safety first
Caution must be used when handling this appliance as it does get
very hot. Always switch off the unit and allow to cool before
cleaning or storing.
Jet cleaning
Your iron will give the best ironing results and will last longer if you
apply jet cleaning after each period of ironing.
UK
Helpline: 0870060 2615
Replacement parts: 0870 167 6646
Ireland 1800 409119
www.morphyrichards.com
For replacement parts, help with using your Morphy Richards
products and lots more, contact us by phone or through our website
40701 rev 1 13/2/06 10:55 AM Page 1
Important safety
instructions
The use of any electrical appliance
requires the following common sense safety
rules.
Primarily there is danger of injury or
death and secondly the danger of damage
to the appliance. These are indicated in the
text by the following two conventions:
WARNING: Danger to the person!
IMPORTANT: Damage to the appliance! In
addition we offer the following safety
advice.
Location
Do not use outdoors.
Children
Close supervision is necessary when any
appliance is used near children.
Personal safety
WARNING: Burns can occur from
touching hot metal parts, hot water
or steam. Use caution when you
turn a steam iron upside down,
there may be hot water in the water
tank.
WARNING: To protect against the
risk of electric shock do not put the
appliance in water or in any other
liquid.
Do not use the vertical steam feature on
clothes that are being worn.
Do not leave the iron unattended whilst
plugged in or on an ironing board. Never
allow the mains lead to over hang the
work surface.
The socket should always be off before
plugging or unplugging from the socket.
Never yank the cord to disconnect from
the socket, instead, grasp plug and pull
to disconnect.
Do not allow the cord to touch hot
surfaces. Let the iron cool completely
before putting away. Loop cord loosely
around the iron before storing.
The iron must be used and rested on a
stable surface.
When placing the iron on its heel, ensure
theat the surface on which the iron is
placed is stable.
The iron is no to be used if it has
dropped, if there are visible signs of
damage or if it is leaking.
Other safety considerations
Use the iron only for its intended use.
Always disconnect the iron from the
electrical socket when filling with water
or emptying, and when not in use.
Do not operate the iron with a damaged
cord or if the iron has been dropped or
damaged. To avoid the risk of electric
shock, do not disassemble the iron, but
telephone Morphy Richards for advice.
Incorrect reassembly can cause a risk of
electric shock when the iron is used.
Special instructions
If your iron does not work, check the
following points:
Has the temperature control been set to
the required temperature? Is the plug in
its socket? Is the plug itself or the
socket faulty? (Check by plugging in
another appliance).
WARNING: When not in use, your
iron should never be placed flat and
left on an ironing board.
To prevent damage to the textile being
ironed, follow the temperature guide
carefully. (Test the inside of the hem of
the garment).
When ironing is complete, remove the
plug from the socket, empty any
remaining water from the tank, and allow
to cool before storage.
If you drop or severely knock your iron
this could cause internal damage even if
the outside appears alright. Have it
checked by a qualified electrician.
It is recommended that you use up one
beaker of water by operating your irons
steam and shot of steam functions
before ironing any clothes as some
dripping may occur while your irons
2
40701 rev 1 13/2/06 10:55 AM Page 2
3
Electrical
requirements
Check that the voltage on the rating
plate of your appliance corresponds with
your house electricity supply which must be
A.C. (Alternating current).
If the socket outlets in your home are
not suitable for the plug supplied with this
appliance the plug should be removed and
the appropriate one fitted.
WARNING : The plug removed from
the mains lead, if severed, must be
destroyed as a plug with a bared
flexible cord is hazardous if engaged
into a live socket outlet.
Should the fuse in the 13 amp plug
require changing a 13 amp BS1362 fuse
must be fitted.
WARNING: This appliance must be
earthed.
Instructions for use
Temperature guide
Heat setting markings on the adjustable control dial of all Morphy Richards irons match
those of the International Textile Care Labelling Code.
Symbol
(120˚C Max) Cool (160˚C Max) Warm (210˚C Max) Hot
Control knob
positions
Do not
iron at all
Fabric Nylon, Acetates
e.g. Acrilan
Courtelle, Orlon
Triacetates, e.g.
Tricel/Polyester
Wool, Polyester
mixtures e.g.
Polyester/Cotton
Cotton, Linen
Rayon, Rayon
mixtures,
e.g. Rayon/Linen
Ironing Iron on wrong side
if moisture required
use damp cloth
(Not Acetate)
Fabrics requiring this
setting usually require
steam pressing for heavy
cotton, denim etc.
With water in tank Dry and spray Steam/spray/shot of steam
Jet clean
Without water in tank Dry ironing
40701 rev 1 13/2/06 10:55 AM Page 3


Specyfikacje produktu

Marka: Morphy Richards
Kategoria: Żelazo
Model: 40701

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Morphy Richards 40701, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Żelazo Morphy Richards

Instrukcje Żelazo

Najnowsze instrukcje dla Żelazo