Instrukcja obsługi MJX T38

MJX Zabawki T38

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla MJX T38 (6 stron) w kategorii Zabawki. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/6
Ages 8+
INSTRUCTION
MANUAL
Introduction
Safety Guidelines
Thank you for purchasing this product, please read this maunal carfully before use and
retain it for future reference.
1. Coaxical-rotor design, built-in gyro insure more stable performance and make the
operation more easier. It is the best choice for beginner.
2. By using of latest infrared auto connection techonology, up to two helicopters can
be operated simultaneously with high stability.
3. Double protection( overcurrent and low-voltage) features ensure the security
of flying and longer product life.
1. Please read this instruction manual carefully before playing and operate the product
according to the manual.
2. Keep the small accessories away from the kids to avoid accident.
3. Keep batteries away from fire or high temperature environment.
4. When flying the helicopter, keep it 1 ~ 2 meters away from user or others to avoid
injury due to collision.
5. Not to decompose or modify the product which may cause malfunction or accident.
6. Fly the helicopter within your eye vision for easy and safety control.
7. Need adult supervision when this helicopter is being played by children.
8. Only batteries of the same or equivalent type as recommended are to be used.
9. Insert batteries with correct polarity.
10. Non rechargeable batteries are not to be charged.
11. Do not mix old and new batteries.
12. Do not mix alkaline batteries, standard (Carbon-Zinc) or rechargeable (Nickel-
Cadmium) batteries.
13. Remove exhausted batteries from the battery compartment for the transmitter.
14. The power supply terminal are not to be short circuited.
15. Please retain this information for future reference.
16. Rechargeable batteries are to be removed from the toy before being charged(only for
AA type).
17. Rechargeable batteries are only to be charged under adult supervision.
Model No.: T38
Product / Spare Parts Included in This Packaging
Sketch - major Parts and Function Switches
Battery Installation
Helicopter Remote Control
Control Sticks
USB Charger Extra Tail Rotor
1. Install the control sticks.(Pic.1)
2. Unscrew counter clockwise to open the battery compartment cover.( Pic. 2 )
3. Install 4 X AA batteries into the battery compartment according to the given polarity. ( Pic. 3 )
4. Screw clockwise to close the battery compartment. (Pic. 4 )
Pic. 1 Pic. 2 Pic. 3 Pic. 4
1
A12
Power
ON OFF
OPEN
Connector
Main Rotor Tail Rotor
Landing gear
Stabilizer bar
ON
OFF
Charging
socket
Searchlight
Power switch
A12
Power
ON OFF
OPEN
12Light indicator
Channel selector
Throttle control stick
Power switch Charging
compartment
Forward/backward/
left/right control stick
Gyro trim
How to remove and insert batteries.
A12
Power
ON OFF
OPEN
Charging the Helicopter
Flight Environment
Preparation for Flight
B. Use the USB charger to charge the helicopter
Connect the USB charger to the USB interface of the computer,
ensure that the helicoper is in a “OFF” power status, then, plug the
output jack of the USB cable into the charging socket of the
helicopter.(pic 6)
1. Indoor , stay away from unstable airflow generated by air conditioners or fans and without
table lamps or other dangerous objects.
2. Wide open space : Recommended minimum 3M ( wide ) x 5M ( length ) x 2.5M ( height )
3. Since this product is using of the infrared remote control technology, operating under
strong sun light or other any other light may cause lost of control.
Must set the remote control at the “OFF” position before operating.
1. Turn on the helicopter and the searchlight will keep flashing rapidly.After a few seconds, the
searchlight will turn to slowly blinking,indicating that the helicopter is ready to connect with
the remote control.
2. Firstly, select the "A","1" or "2" channel;turn on the remote control and the power light of the
remote control will blink slowly; push the throttle control stick up to the top, then push it to the
bottom, the power light of the remote control will keep rapidly blinking, meaning that the
remote control is sending out connectional signal.Once signal connection is done, the power
light of the remote control will turn to constant "ON" without blinking.
3. Slowly push up the throttle stick and the helicopter takes off.
2
(1) There are two ways available to charge the helicopter.
A. Use the remote control to charge to helicoper
● Open the cover of the charging compartment on the remote control
and take out the charging cable.
● Ensure the helicopter is in a “OFF” power status.
Plug the output jack of the charging cable into the charging socket
of the helicopter. Then, charging is beginning. (pic 5)
(2) The light of the remote control/USB charger is off when charging
is proceeding and will turn on automatically when charging is
done. Fully charge takes approximately 40 minutes.
Hints
Select channel 1 and channel 2 and operate maximum 2 helicopters simultaneously.
Not to use the same channel by 2 helicopters at the same time.
Set the connection one by one. Otherwise, it may not be connected.
Once turn off the power. The connection procedure must be repeated to operate the
helicopter.
It is advised to select channel A if there's only 1 helicopter is playing.
Pic. 6
Pic. 5


Specyfikacje produktu

Marka: MJX
Kategoria: Zabawki
Model: T38

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z MJX T38, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Zabawki MJX

MJX

MJX T10 Instrukcja

4 Lipca 2024
MJX

MJX T641C Instrukcja

4 Lipca 2024
MJX

MJX F647 Instrukcja

4 Lipca 2024
MJX

MJX T38 Instrukcja

4 Lipca 2024
MJX

MJX T41C Instrukcja

3 Lipca 2024
MJX

MJX 8117 Instrukcja

3 Lipca 2024
MJX

MJX 1539A Instrukcja

3 Lipca 2024
MJX

MJX 3512A Instrukcja

1 Lipca 2024

Instrukcje Zabawki

Najnowsze instrukcje dla Zabawki