Instrukcja obsługi Mitsubishi PLA-RP

Mitsubishi klimatyzacja PLA-RP

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Mitsubishi PLA-RP (44 stron) w kategorii klimatyzacja. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/44

SERVICE MANUAL

SPLIT-TYPE, HEAT PUMP AIR CONDITIONERS

SPLIT-TYPE, AIR CONDITIONERS

NOTE:

• This manual describes

only service data of the

indoor units.

• RoHS compliant prod-

ucts have <G> mark on

the spec name plate.

CONTENTS

1. TECHNICAL CHANGES.................................. 2

2. REFERENCE MANUAL...................................

3. SAFETY PRECAUTION...................................

4. PART NAMES AND FUNCTIONS................... 4

5. SPECIFICATIONS............................................

6. NOISE CRITERION CURVES.........................

7. OUTLINES AND DIMENSIONS......................

8. WIRING DIAGRAM .........................................

9. REFRIGERANT SYSTEM DIAGRAM............

10. TROUBLESHOOTING....................................17

11. SPECIAL FUNCTION .....................................

12. DISASSEMBLY PROCEDURE ....................... 41

Indoor unit

[Model names] [Service Ref.]

WIRED REMOTE

CONTROLLER

WIRELESS REMOTE

CONTROLLER

ON/OFF TEMP

ON/OFF

TEMP.

INDOOR UNIT

Model name

indication

PARTS CATALOG (OCB412)

No. OCH412

REVISED EDITION-D

March 2009

Revision:

• PLA-RP140BA2.UK

is added in REVISED

EDITION-D.

• Some descriptions have

been modiﬁed.

• Please void OCH412

REVISED EDITION-C.

PLA-RP35BA

PLA-RP50BA

PLA-RP60BA

PLA-RP71BA

PLA-RP100BA

PLA-RP125BA

PLA-RP140BA

PLA-RP71BA2

PLA-RP100BA2

PLA-RP125BA2

PLA-RP140BA2

PLA-RP35BA.UK

PLA-RP35BA1.UK PLA-RP35BA#2.UK

PLA-RP50BA.UK

PLA-RP50BA1.UK PLA-RP50BA#2.UK

PLA-RP60BA.UK

PLA-RP60BA1.UK PLA-RP60BA#2.UK

PLA-RP71BA.UK

PLA-RP71BA1.UK PLA-RP71BA#2.UK

PLA-RP100BA.UK PLA-RP100BA#2.UK

PLA-RP125BA.UK PLA-RP125BA#2.UK

PLA-RP140BA.UK PLA-RP140BA#2.UK

PLA-RP71BA2.UK

PLA-RP100BA2.UK

PLA-RP125BA2.UK

PLA-RP140BA2.UK

2REFERENCE MANUAL

Service Ref.

PUHZ-RP200/250YHA(1)(2)

SUZ-KA·VA.TH

Service Manual No.

OC338

PUHZ-P200/250YHA

PUHZ-RP200/250YHA2

OCH424/OCB424

PUHZ-RP35/50/60/71/100/125/140VHA2

(1)

PUHZ-RP100/125/140/YHA2(1)

PUHZ-RP35/50/60/71/100VHA3

PUHZ-RP100YHA3

OC374

PU(H)-P71/100VHA.UK

PU(H)-P71/100/125/140YHA.UK OC379

PUHZ-HRP71/100VHA

PUHZ-HRP100/125YHA OCH425/OCB425

OCH428/OCB428

OCH415/OCB415

MXZ-8A140VA2/VA3

PUHZ-P100/125/140VHA2(1).UK

OC322

OC316

OUTDOOR UNIT’S SERVICE MANUAL

1TECHNICAL CHANGES

PLA-RP35BA1.UK PLA-RP35BA#2.UK

PLA-RP50BA1.UK PLA-RP50BA#2.UK

PLA-RP60BA1.UK PLA-RP60BA#2.UK

PLA-RP71BA1.UK PLA-RP71BA#2.UK

PLA-RP100BA.UK PLA-RP100BA#2.UK

PLA-RP125BA.UK PLA-RP125BA#2.UK

PLA-RP140BA.UK PLA-RP140BA#2.UK

INDOOR CONTROLELR BOARD (I.B.) has been changed. (S/W version up)

PLA-RP35BA.UK PLA-RP35BA 1.UK

PLA-RP50BA.UK PLA-RP50BA1.UK

PLA-RP60BA.UK PLA-RP60BA1.UK

PLA-RP71BA.UK PLA-RP71BA1.UK

FAN MOTOR (MF) has been changed.

TURBO FAN, NUT and WASHER have been changed.

PLA-RP140BA#2.UK PLA-RP140BA2.UK

HEAT EXCHANGER has been changed.

INDOOR CONTROLELR BOARD (I.B.) has been changed. (S/W version up)

SAFETY PRECAUTION

Cautions for units utilising refrigerant R410A

3-2. CAUTIONS RELATED TO NEW REFRIGERANT

Use new refrigerant pipes.

Make sure that the inside and outside of refrige-

rant piping is clean and it has no contamination

such as sulfur hazardous for use, oxides, dirt,

shaving particles, etc.

In addition, use pipes with speciﬁed thickness.

Store the piping to be used indoors during

installation and both ends of the piping sealed

until just before brazing. (Leave elbow joints, etc.

in their packaging.)

Use ester oil, ether oil or alkylbenzene oil (small

amount) as the refrigerant oil applied to ﬂares

and flange connections.

In case of using the existing pipes for R22, be careful with

the followings.

· For RP100, 125 and 140, be sure to perform replace-

ment operation before test run.

· Change flare nut to the one provided with this product.

Use a newly flared pipe.

· Avoid using thin pipes.

Charge refrigerant from liquid phase of gas

cylinder.

If the refrigerant is charged from gas phase, composition

change may occur in refrigerant and the efficiency will be

lowered.

Do not use refrigerant other than R410A.

If other refrigerant (R22 etc.) is used, chlorine in refrige-

rant can cause deterioration of refrigerant oil etc.

Use a vacuum pump with a reverse ﬂow check

valve.

Vacuum pump oil may flow back into refrigerant cycle and

that can cause deterioration of refrigerant oil etc.

Use the following tools speciﬁcally designed for

use with R410A refrigerant.

The following tools are necessary to use R410A refrigerant.

Handle tools with care.

If dirt, dust or moisture enters into refrigerant cycle, that can

cause deterioration of refrigerant oil or malfunction of com-

pressor.

Do not use a charging cylinder.

If a charging cylinder is used, the composition of refrigera-

nt will change and the efficiency will be lowered.

Flare tool

Electronic refrigerant

charging scale

Vacuum pump adaptor

Size adjustment gauge

Gauge manifold

Torque wrench

Gas leak detector

Charge hose

Tools for R410A

Contamination inside refrigerant piping can cause deterio-

ration of refrigerant oil etc.

If dirt, dust or moisture enters into refrigerant cycle, that can

cause deterioration of refrigerant oil or malfunction of com-

pressor.

If large amount of mineral oil enters, that can cause deterio-

ration of refrigerant oil etc.

Ventilate the room if refrigerant leaks during

operation. If refrigerant comes into contact with

a ﬂame, poisonous gases will be released.

[1] Cautions for service

(1) Perform service after recovering the refrigerant left in unit completely.

(2) Do not release refrigerant in the air.

(3) After completing service, charge the cycle with speciﬁed amount of refrigerant.

(4) When performing service, install a ﬁlter drier simultaneously.

Be sure to use a ﬁlter drier for new refrigerant.

[2] Additional refrigerant charge

When charging directly from cylinder

· Check that cylinder for R410A on the market is syphon type.

· Charging should be performed with the cylinder of syphon stood vertically. (Refrigerant is charged from liquid phase.)

3-1. ALWAYS OBSERVE FOR SAFETY

Before obtaining access to terminal, all supply

circuits must be disconnected.

Specyfikacje produktu

Marka:	Mitsubishi
Kategoria:	klimatyzacja
Model:	PLA-RP
Kolor produktu:	Biały
Technologia przetworników:	Tak
Wi-Fi:	Nie
Model:	Jednostka wewnętrzna klimatyzatora
Funkcje wentylacji:	Cooling, Heating
Wydajność chłodzenia w watach (nominalna):	16000 W
Nominalna moc cieplna w watach (cieplejszy sezon grzewczy):	- W
Nominalna moc cieplna w watach (średni sezon grzewczy):	- W
Nominalna moc cieplna w watach (chłodniejszy sezon grzewczy):	- W
Godzinne zużycie energii (chłodzenie):	- kWh
Godzinne zużycie energii (ogrzewanie):	- kWh
Roczne zużycie energii (chłodzenie):	- kWh
Roczne zużycie energii (ogrzewanie) (cieplejszy sezon grzewczy):	- kWh
Roczne zużycie energii (ogrzewanie) (średni sezon grzewczy):	- kWh
Roczne zużycie energii (ogrzewanie) (chłodniejszy sezon grzewczy):	- kWh
Maksymalna moc (chłodzenie):	- kW
Maksymalna moc (ogrzewanie) (cieplejszy sezon grzewczy):	- kW
Maksymalna moc (ogrzewanie) (średni sezon grzewczy):	- kW
Maksymalna moc (ogrzewanie) (chłodniejszy sezon grzewczy):	- kW
Enegretyczna wydajność chłodzenia:	3.61
Enegretyczna wydajność ogrzewania:	3.01
Maksymalna wydajność chłodzenia w watach:	18000 W
Maksymalna wydajność ogrzewania w watach:	15300 W
Klasa energetyczna (chłodzenie):	A
Minimalna wydajność chłodzenia w watach:	5000 W
Minimalna wydajność ogrzewania w watach:	5500 W
Szerokość jednostki wewnętrznej:	840 mm
Głębokość jednostki wewnętrznej:	840 mm
Wysokość jednostki wewnętrznej:	298 mm
Waga jednostki wewnętrznej:	27000 g
Typ jednostki wewnętrznej:	Sufit