Instrukcja obsługi Mitsubishi EX241U

Mitsubishi Projektor EX241U

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Mitsubishi EX241U (59 stron) w kategorii Projektor. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/59

EX321U/EX241U

ENGLISH

DLP™ PROJECTOR

MODEL

EX321U/EX241U

User Manual

This User Manual is important to you.

Please read it before using your projector.

EN-2

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsu-

lated "dangerous voltage" within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric

shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING

Use the attached specified power supply cord. If you use another

power supply cord, it may cause interference with radio and television

reception.

Use the attached RGB cable with this equipment so as to keep interfer-

ence within the limits of an FCC Class B device.

This apparatus must be grounded.

DO NOT LOOK DIRECTLY INTO THE LENS WHEN THE

PROJECTOR IS IN THE POWER ON MODE.

CAUTION

Not for use in a computer room as defined in the Standard for the Pro-

tection of Electronic Computer/Data Processing Equipment, ANSI/

NFPA 75.

The attached power cord is to be used exclusively for this product.

Never use it for other products.

When using the projector in Europe:

COMPLIANCE NOTICE

This Projector complies with the requirements of the EC Directive

2004/108/EC "EMC Directive" and 2006/95/EC "Low Voltage Direc-

tive".

The electro-magnetic susceptibility has been chosen at a level that

gains proper operation in residential areas, on business and light

industrial premises and on small-scale enterprises, inside as well as

outside of the buildings. All places of operation are characterized by

their connection to the public low voltage power supply system.

WARNING

Use the attached RGB cable with this equipment so as to keep interfer-

ence within the limits of an EN55022 Class B device.

When using the projector in South Korea:

WARNING

Use the attached RGB cable with this equipment so as to keep interfer-

ence within the limits of a K00022 Class B device.

Please follow WARNING instructions.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUT-

LET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

NOTE:

SINCE THIS PROJECTOR IS PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND

SHALL BE EASILY ACCESSIBLE.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

EN-3

ENGLISH

WARNING

• If the projector comes with a lens cap, please note that the lens cap

is for protecting the lens. If you leave the lens cap on the lens with

the projector turned on, it may be deformed because of heat build-

up. Remove the lens cap when you turn on the projector.

• One of power cords for the U.S., EU/Indonesia, U.K., Australia,

South Korea and Argentina is provided appropriately.

• This projector uses the power plug of three-pin grounding type. Do

not remove the grounding pin from the power plug. If the power plug

doesn’t fit your wall outlet, ask an electrician to change the wall out-

let.

• In case that the power cord for the U.S. is provided with this projec-

tor, never connect this cord to any outlet or power supply using other

voltages or frequencies than rated. If you want to use a power sup-

ply using other voltage than rated, prepare an appropriate power

cord separately.

• Use 100-240 V AC 50/60 Hz to prevent fire or electric shock.

• Do not place any objects on the power cord or do not place the pro-

jector near heat sources to prevent damage to the power cord. If the

power cord should be damaged, contact your dealer for replace-

ment because it may cause fire or electric shock.

• Do not modify or alter the power cord. If the power cord is modified

or altered, it may cause fire or electric shock.

Note: This symbol mark is for EU

countries only.

This symbol mark is according to

the directive 2002/96/EC Article 10

Information for users and Annex

IV, and/or to the directive 2006/66/

EC Article 20 Information for end-

users and Annex II.

Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality

materials and components which can be recycled and/or reused.

This symbol means that electrical and electronic equipment, batteries and accumula-

tors, at their end-of-life, should be disposed of separately from your household waste.

If a chemical symbol is printed beneath the symbol shown above, this chemical sym-

bol means that the battery or accumulator contains a heavy metal at a certain concen-

tration. This will be indicated as follows:

Hg: mercury (0,0005%), Cd: cadmium (0,002%), Pb: lead (0,004%)

In the European Union there are separate collection systems for used electrical and

electronic products, batteries and accumulators.

Please, dispose of this equipment, batteries and accumulators correctly at your local

community waste collection/recycling centre.

Please, help us to conserve the environment we live in!

Specyfikacje produktu

Marka:	Mitsubishi
Kategoria:	Projektor
Model:	EX241U
Kolor produktu:	Biały
Źródło zasilania:	Prąd przemienny
Wbudowany wyświetlacz:	Nie
Częstotliwość wejściowa AC:	50 - 60 Hz
Napięcie wejściowe AC:	100 - 240 V
Wysokość produktu:	228.6 mm
Szerokość produktu:	281.9 mm
Głębokość produktu:	91.4 mm
Waga produktu:	2500 g
W zestawie pilot zdalnego sterowania:	Nie
Podręcznik użytkownika:	Tak
Poziom hałasu:	34 dB
Wbudowane głośniki:	Tak
Moc wyjściowa (RMS):	2 W
Wyjścia słuchawkowe:	1
Ilość portów Ethernet LAN (RJ-45):	1
Współczynnik kontrastu (typowy):	2700:1
Wi-Fi:	Nie
Pobór mocy w trybie czuwania:	- W
Wejscie Audio (L,P):	1
Przewodowa sieć LAN:	Tak
Kompatybilność 3D:	Tak
Pobór mocy:	315 W
Ilość portów HDMI:	1
Port RS-232:	1
Liczba portów VGA (D-Sub):	2
Wersja HDMI:	1.2
HDCP:	Nie
Wyście mocy ac:	Tak
Długość ogniskowa:	- mm
Zasięg skanowania w poziomie:	31 - 94 kHz
Zasięg skanowania (długość):	48 - 120 Hz
Obsługiwane rozdzielczości grafiki:	1024 x 768 (XGA), 1600 x 1200 (UXGA)
Wejście komponentu wideo (ypbpr/ycbcr):	1
Obsługiwane tryby wideo:	1080p, 480p, 540p, 576p, 720p
Pełny HD:	Nie
System formatu sygnału analogowego:	NTSC, NTSC 4.43, PAL, PAL 60, SECAM
Ostrość:	Ręczny
Interfejs SCSI:	RS-232
Jasność projektora:	2600 ANSI lumenów
Technologia projekcji:	DLP
Naturalna rozdzielczość projektora:	XGA (1024x768)
Odległość projekcji:	1.5 - 11.6 m
Kompatybilność rozmiaru ekranu:	40 - 300 "
Żywotność źródła światła:	3000 h
Żywotność źródła światła (tryb ekonomiczny):	4000 h
Stosunek padania:	1.9 - 2.1:1
Wejście S-Video:	1
Poziom hałasu (tryp ekonomiczn):	32 dB
3D Ready:	Tak
Odległość projekcji (tele):	1.7 - 10.5 m
Odległość projekcji (wide):	1.5 - 11.4 m
Częstotliwość zegara skanera:	170 MHz
HD-Ready:	Tak