Instrukcja obsługi Mistral MS9801

Mistral nieskategoryzowany MS9801

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Mistral MS9801 (8 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
3-In-1
Bathroom Heater
Model: MS9801
Instruction Manual
2
Important Safeguards
• This bathroom heater is not intended for use
by persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure that
they do not play with the appliance.(i.e. wall
switch)
• Ensure that the switch is in the o position
when changing the heat lamp (globe) or light
globe.
• Ensure that the waage of the centre
replacement light globe is the same as the
globe
supplied with the unit.
• E27 275W heat globes can be used in this unit.
• Ensure the grille is free of objects, dust build
up, etc. Make sure that the airflow through the
grille is not inhibited.
• Means for disconnection must be incorporated
in the xed wiring, in accordance with the
wiring rules.
• Precautions must be taken to avoid the back-
flow of gases into the room from the open flue
of gas or other fuel burning appliances.
• When cuing the ceiling material, care
must be taken to ensure you do not damage
electrical wiring and other hidden utilities.
• This bathroom heater is to be installed so that
switches or other controls can not be touched
by a person in the bath or shower.
• The lamps are extremely hot when in use. Do
not touch to the lamps with any part of your
body when in use. Allow all lamps cool down
suiciently before touching or replacement.
• The appliance shall, under no circumstances,
be covered with insulating material or similar
material.
Cleaning
• Ensure the bathroom heater is switched o
and cool down suiciently before cleaning.
• Remove globes when they are at room
temperature. Wipe with a damp cloth, never
immerse.
• Unclip lamp surround and wash in warm
soapy water. Always use a soft cloth, never
abrasives.
• Clean away any excess flu from the inside of
the body, motor blade brackets.
• The exhaust fan requires regular cleaning to
ensure optimum performance. With the power
o, regularly wipe the fan clear of dust and
dirt.
• Clean the exhaust ducting kit, ensuring there
are no obstructions at the exit.
Warning
If the power cord is damaged, the power cord
must be replaced by either the service agent or
similarly qualied persons in order to avoid a
hazard.
This product has not been designed for any uses
other than those specied in this booklet.
Save These Instructions
3
Fiing Instructions
Thank you for purchasing bathroom heater. This
product combines heat globes an exhaust fan
and light, to provide gentle radiant heat, clean
air and a bright light from one compact, stylish
unit. This model allows for exhausting of steam
and odours right out of your home. All functions
are separately controlled from a supplied switch
plate for convenient ngertip control.
You can be assured trouble free operation by
geing your Bathroom heater carefully installed
by a qualied electrician, according to the
instructions. Please read all instructions before
commencing installation.
Bathroom heater can be mounted in any room
that requires instant, direct, and radiant heat
to ward o winter chills. The light has separate
switching, making it suitable for bathrooms,
ensuites, toilets, dressing & change rooms.
Suitability
The Bathroom Heater has been designed
especially for cavity type ceilings. Flat roof
installation is NOT recommended.
This product must not be mounted in areas
subject to direct splashing, and must be mounted
in the horizontal position only. Unsuitable for
‘cathedral’ or ‘raked’ ceilings.
This model comes with 4 Infrared Heat Globes
which emit harmless radiant heat. It is best
positioned directly above the area requiring
warmth. Before you start, make sure your ceiling
has at least 280mm clearance from the roof (see
to the ‘Mounting’ diagram).
Where to Locate
Radiant globe heaters are not designed to heat
entire rooms. They provide instant, concentrated
heat to persons standing directly below the heat
lamps. Therefore, Bathroom heater should be
located over the area where drying o takes
place, not directly over a shower or bath.
This Heater is not designed to be left on for
extended periods of time, as this could cause
overheating and premature failure. Bathroom
Heater, should not be covered or installed in
situations which restrict the natural ventilation of
the units for cooling purposes.
Ceiling insulation should be kept well clear
of the units (at least 100mm). For optimum
performance, models with exhaust fans should
be installed in areas with good ventilation,
to enable fresh air to flow into the room. Any
restrictions on return air entering the room will
impair eectiveness and may contribute to
premature failure.
Radiant Heat
The Bathroom Heater requires no warm up period
because of its eicient, radiant heat globes. Heat
is directed at you for an instant warmth you can
feel, rather than gradually warming the entire
room. Because of this, Bathroom Heater only
needs to be turned ON when you are in the room.
General Illumination
A 6 wa light is designed to provide general
illumination only. Additional lighting may be
required for duties.

Specyfikacje produktu

Marka: Mistral
Kategoria: nieskategoryzowany
Model: MS9801

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Mistral MS9801, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany Mistral

Mistral

Mistral MWM710FL Instrukcja

14 Sierpnia 2024
Mistral

Mistral MRVAC500B Instrukcja

14 Sierpnia 2024
Mistral

Mistral MCC604TG Instrukcja

14 Sierpnia 2024
Mistral

Mistral MIM12BLK Instrukcja

14 Sierpnia 2024
Mistral

Mistral MAAT-X7 Instrukcja

14 Sierpnia 2024
Mistral

Mistral MIM12S Instrukcja

14 Sierpnia 2024
Mistral

Mistral MR60WSOUT Instrukcja

14 Sierpnia 2024
Mistral

Mistral MBF117W Instrukcja

14 Sierpnia 2024
Mistral

Mistral MDW46X Instrukcja

14 Sierpnia 2024
Mistral

Mistral MCFH98 Instrukcja

14 Sierpnia 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024