Instrukcja obsługi Milwaukee M18 Fuel 2953-22

Milwaukee Maszyna do śrub M18 Fuel 2953-22

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Milwaukee M18 Fuel 2953-22 (16 stron) w kategorii Maszyna do śrub. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

Cat. No. / No de cat.

2953-20

M18 FUEL™ 1/4" HEX IMPACT DRIVER

TOURNEVIS À PERCUSSION HEXAGONAL DE 6 mm (1/4")

M18 FUEL™

DESTORNILLADOR DE IMPACTO HEXAGONAL M18 FUEL™

DE 6 mm (1/4")

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

• Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

BATTERY TOOL USE AND CARE

• Recharge only with the charger specied by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of re when used

with another battery pack.

• Use power tools only with specically desig-

nated battery packs. Use of any other battery

packs may create a risk of injury and re.

• When battery pack is not in use, keep it away

from other metal objects, like paper clips, coins,

keys, nails, screws or other small metal objects,

that can make a connection from one terminal

to another. Shorting the battery terminals together

may cause burns or a re.

• Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact ac-

cidentally occurs, flush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation

or burns.

• Do not use a battery pack or tool that is dam-

aged or modied. Damaged or modied batteries

may exhibit unpredictable behavior resulting in re,

explosion or risk of injury.

• Do not expose a battery pack or tool to re or

excessive temperature. Exposure to re or tem-

perature above 265°F (130°C) may cause explosion.

• Follow all charging instructions and do not

charge the battery pack or tool outside the

temperature range specied in the instructions.

Charging improperly or at temperatures outside

the specied range may damage the battery and

increase the risk of re.

SERVICE

• Have your power tool serviced by a qualied

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

• Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

SPECIFIC SAFETY RULES

FOR IMPACT DRIVER

• Hold the power tool by insulated gripping sur-

faces, when performing an operation where the

fastener may contact hidden wiring. Fasteners

contacting a wire may make exposed metal "live"

parts of the power tool and could give the "live"

operator an electric shock.

• Wear ear protectors when impact drilling. Expo-

sure to noise can cause hearing loss.

• Use only sockets and other accessories spe-

cically designed for use on impact wrenches

and drivers. Other sockets and accessories might

shatter or break causing injury.

•

WARNING

To reduce the risk of injury, when

working in dusty situations, wear

appropriate respiratory protection or use an

OSHA compliant dust extraction solution.

• Always use common sense and be cautious when

using tools. It is not possible to anticipate every

situation that could result in a dangerous outcome.

Do not use this tool if you do not understand these

operating instructions or you feel the work is beyond

your capability; contact Milwaukee Tool or a trained

professional for additional information or training.

• Maintain labels and nameplates. These carry

important information. If unreadable or missing,

contact a MILWAUKEE service facility for a free

replacement.

•

WARNING

Some dust created by power sand-

ing, sawing, grinding, drilling, and

other construction activities contains chemicals

known to cause cancer, birth defects or other repro-

ductive harm. Some examples of these chemicals

are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated

lumber.

Your risk from these exposures varies, depending

on how often you do this type of work. To reduce

your exposure to these chemicals: work in a well

ventilated area, and work with approved safety

equipment, such as those dust masks that are spe-

cially designed to lter out microscopic particles.

SPECIFICATIONS

Cat. No. 2953-20 .....................................................

Volts .............................................................. 18 DC

Battery Type .................................................M18™

Charger Type ................................................ M18™

RPM ........................................................... 0 - 3900

IPM ............................................................ 0 - 4400

Recommended Ambient

Operating Temperature ......................0°F to 125°F

SYMBOLOGY

Volts

Direct Current

No Load Revolutions per Minute (RPM)

Impacts per Minute Under Load (IPM)

Read Operator's Manual

CUS

UL Listing for Canada and U.S.

Specyfikacje produktu

Marka:	Milwaukee
Kategoria:	Maszyna do śrub
Model:	M18 Fuel 2953-22

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Milwaukee M18 Fuel 2953-22, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Maszyna do śrub Milwaukee

Milwaukee M18 BDD Instrukcja

29 Grudnia 2024

Milwaukee M12 BDD Instrukcja

29 Grudnia 2024

Milwaukee M12 FCIWP12G3 Instrukcja

25 Grudnia 2024

Milwaukee M18 ONEFMTIW2FC12 Instrukcja

8 Października 2024

Milwaukee M18 ONEFHIWF12 Instrukcja

5 Października 2024

Milwaukee M18 FUEL FMTIW2F38 Instrukcja

4 Października 2024

Milwaukee M12 FID2 Instrukcja

4 Października 2024

Milwaukee M12 FUEL FRAIWF12 Instrukcja

4 Października 2024

Milwaukee M12 BRAID Instrukcja

4 Października 2024

Milwaukee M18 BLID2 Instrukcja

4 Października 2024

Instrukcje Maszyna do śrub

Najnowsze instrukcje dla Maszyna do śrub

Fuxtec FX-E1IW20 Instrukcja

13 Stycznia 2025

Hazet 9012EL-SPC Instrukcja

12 Stycznia 2025

RYOBI One+ R18IW3 Instrukcja

11 Stycznia 2025

MSW -ACW700 Instrukcja

10 Stycznia 2025

RYOBI PCL250 Instrukcja

4 Stycznia 2025

RYOBI PCL212 Instrukcja

4 Stycznia 2025

RYOBI One+ RSD18 Instrukcja

3 Stycznia 2025

Hazet 9212SPC-010 Instrukcja

1 Stycznia 2025

Hazet 6004CT-3 Instrukcja

1 Stycznia 2025

Hazet 6001-1.5/3 Instrukcja

1 Stycznia 2025