Instrukcja obsługi Milwaukee M18 2665-22

Milwaukee Wiertarka M18 2665-22

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Milwaukee M18 2665-22 (16 stron) w kategorii Wiertarka. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
Cat. No. / No de cat.
2662-20, 2663-20, 2664-20, 2665-20
M18™ IMPACT WRENCHES AND IMPACT DRIVER
CLÉS À CHOCS ET VISSEUSE DE M18™
LLAVES DE IMPACTO E IMPULSOR DE IMPACTO DE M18™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
3
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a re.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acci-
dentally occurs, ush with water. If liquid con-
tacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
• Do not use a battery pack or tool that is dam-
aged or modied. Damaged or modied batteries
may exhibit unpredictable behavior resulting in re,
explosion or risk of injury.
• Do not expose a battery pack or tool to re or
excessive temperature. Exposure to re or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specied in the instructions.
Charging improperly or at temperatures outside
the specied range may damage the battery and
increase the risk of re.
SERVICE
• Have your power tool serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
IMPACT WRENCHES/IMPACT
DRIVER
• Hold power tool by insulated gripping surfaces,
when performing an operation where the fas-
tener may contact hidden wiring. Fasteners con-
tacting a “live” wire may make exposed metal parts
of the power tool “live” and could give the operator
an electric shock.
• Wear ear protectors. Exposure to noise can
cause hearing loss.
• Keep hands away from all cutting edges and
moving parts.
•
WARNING
To reduce the risk of injury, when
working in dusty situations, wear
appropriate respiratory protection or use an
OSHA compliant dust extraction solution.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training..
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
•
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are spe-
cially designed to lter out microscopic particles.
SYMBOLOGY
Volts
Direct Current
No Load Revolutions per Minute (RPM)
Impacts per Minute Under Load (IPM)
C US
UL Listing for
Canada and U.S.
SPECIFICATIONS
Volts .............................................................. 18 DC
Battery Type .................................................M18™
Charger Type ................................................M18™
Cat. No. 2662-20
.....................................................
RPM ............................................................. 0-2000
Drive Shank ..........................................1/2" Square
IPM .............................................................. 0-2500
Cat. No. 2663-20
.....................................................
RPM ............................................................. 0-2000
Drive Shank ..........................................1/2" Square
IPM .............................................................. 0-2500
Cat. No. 2664-20
.....................................................
RPM ............................................................. 0-2000
Drive Shank ..........................................3/4" Square
IPM .............................................................. 0-2500
Cat. No. 2665-20
.....................................................
RPM ............................................................. 0-2000
Drive Shank .............................................7/16" Hex
IPM .............................................................. 0-2500
Recommended Ambient
Operating Temperature ......................0°F to 125°F
FUNCTIONAL DESCRIPTION
1. Handle
2. Trigger
3. Control switch
4. Drive shank
5. Hex drive (2665-20)
6. Square drive with pin detent (2662-20)
7. Square drive with hog ring (2663-20, 2664-20)
3
1
5
7
6
4
2

Specyfikacje produktu

Marka: Milwaukee
Kategoria: Wiertarka
Model: M18 2665-22

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Milwaukee M18 2665-22, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Wiertarka Milwaukee

Milwaukee

Milwaukee M18 Fuel Super Hawg 2709-22 Instrukcja

8 Października 2024
Milwaukee

Milwaukee SB 2-35 D Instrukcja

4 Października 2024
Milwaukee

Milwaukee M18 BLH Instrukcja

4 Października 2024
Milwaukee

Milwaukee M18 BLHX Instrukcja

4 Października 2024
Milwaukee

Milwaukee K 900 S Instrukcja

4 Października 2024
Milwaukee

Milwaukee K 545 S Instrukcja

4 Października 2024
Milwaukee

Milwaukee M12 FPDX Instrukcja

4 Października 2024
Milwaukee

Milwaukee K 700 S Instrukcja

4 Października 2024
Milwaukee

Milwaukee M12 FDDX Instrukcja

4 Października 2024
Milwaukee

Milwaukee M12 FPD2 Instrukcja

4 Października 2024

Instrukcje Wiertarka

Najnowsze instrukcje dla Wiertarka

Bosch

Bosch GRC 12V-60 Professional Instrukcja

12 Marca 2025
Worx

Worx WX130L.9 Instrukcja

25 Lutego 2025
Bosch

Bosch GBH 18V-18 Professional Instrukcja

6 Lutego 2025
DeWalt

DeWalt dc987ka Instrukcja

15 Stycznia 2025
AEG

AEG KH 28 Super XE Instrukcja

14 Stycznia 2025
Makita

Makita HR2631FTX4 Instrukcja

12 Stycznia 2025
Holzmann

Holzmann SB 4116HN Instrukcja

11 Stycznia 2025
Bavaria

Bavaria BCD 12/1 Instrukcja

11 Stycznia 2025
Black & Decker

Black & Decker PF126 Instrukcja

11 Stycznia 2025
Einhell

Einhell BT-ID 710 E Instrukcja

11 Stycznia 2025