Instrukcja obsługi Milwaukee 48-22-8590

Milwaukee Niesklasyfikowane 48-22-8590

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Milwaukee 48-22-8590 (20 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/20
Cat. No. / No de cat.
48-22-8590
40" STEEL WORK CART
CHARIOT DE TRAVAIL EN ACIER DE 1,01 m (40")
CARRO DE TRABAJO DE ACERO DE 1,01 m (40")
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
2
IMPORTANT SAFETY INSTRUCTIONS
WARNING
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in serious in-
jury. Save all warnings and instructions for future
reference.
•Use the station and accessories in accordance
with these instructions and in the manner in-
tended, taking into account the working conditions.
Use of the station for operations dierent from those
intended could result in a hazardous situation.
•Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• -Fully assemble the station according to the as
sembly instructions. Do not leave o any pieces.
•Do not modify the station in any way. Use only
specifically recommended accessories. Drilling
holes or modifying the station will lower the load
capacity, which can cause the station to collapse,
resulting in injury.
•Lock wheels when station is not being moved.
Unlocked wheels can allow the station to move
unexpectedly.
•Keep the station on a level surface. Do not load,
unload, or park station on an incline. The station
may become unbalanced and tip, resulting in injury.
•Always balance the station load to avoid tipping.
Unbalanced stations are more likely to tip when be-
ing moved or when using the station work surfaces.
Evenly distribute the weight front to back and side
to side. To help prevent the station from tipping,
load the product starting with the bottom drawers.
• Do not exceed the maximum product weight,
including contents. Do not exceed the maximum
weight for each drawer. Overloaded stations can
tip, collapse, or damage drawer slides.
• Do not open more than one drawer at a time.
Station may tip, causing injury.
•Keep children and bystanders away while load-
ing, unloading, and moving the station. Distrac-
tions can cause you to lose control.
•Only lift the station according to the instructions
in this manual. Never lift by the side handle. Oth-
er methods may be dangerous, resulting in injury.
• Only transport the station when empty. Properly
secure when transporting.
• Do not mount the station on a truck bed or any
other moving object.
• Lock all drawers before rolling the station. The
drawers could come open and make the station
unstable and tip.
• Only roll the station short distances by using
the handle provided.
• Secure all items before rolling the station. Loose
items could shift, causing the station to become
unstable.
• Do not use drawers as steps. Do not stand
on the station. Station may tip, causing injury.
• Do not step on side shelf. Shelf may collapse or
break. Station may tip, causing injury.
•Do not use station in explosive atmospheres,
such as in the presence of ammable liquids, gases
or dust. This equipment has internal arcing or spark-
ing parts. Station should not be located in a recessed
area or below oor level.
•Station plugs must match the outlet. Never mod-
ify the plug in any way. Do not use any adapter
plugs with earth (grounded) chest/cabinet power
strips. Unmodied plugs and matching outlets will
reduce risk of electric shock.
•Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
•Maintain station. Check for misalignment or bind-
ing wheels, breakage or bending of drawer slides or
other parts and any other condition that may aect
the station's operation. Do not use damaged station.
•Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
•Have your station serviced by a qualied repair
person using only identical replacement parts.
This will ensure that the safety of the station is
maintained.
Federal Communications Commission
WARNING: Changes or modications to this unit
not expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pur-
suant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harm-
ful interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment o and on, the user is encouraged to try
to correct the interference by one or more of the fol-
lowing measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is connected.
• Consult the dealer o
r an experienced radio/TV techni-
cian for help.
SPECIFICATIONS
Cat. No. 48-22-8590 ................................................
Top Tray Capacity ...................... 300 lbs. (136.0 kg)
Top Drawer Capacity 100 lbs. (45.4 kg) ...................
Bottom Tray Capacity ..................200 lbs. (90.7 kg)
Flip Up Shelf Capacity 50 lbs. (22.7 kg) ...................
Storage Tray Capacity ...................50 lbs. (22.7 kg)
Total Capacity 700 lbs. (317.5 kg) ............................
AC Input Volts 120 ....................................................
Hertz 60 ....................................................................
Amps 15 ...................................................................
USB Output Volts...................................................5
USB Watts 10.5 ........................................................
USB Amps ..........................................................2.1
Recommended Ambient Operating
Temperature 0°F to 104°F (-18°C to 40°C) ...........
3
SYMBOLOGY
Warning
Read Operator's Manual
Electrical Shock Hazard
Do not open more than one drawer at a
time. Station may tip, causing injury.
Lock wheels when station is not
being moved. Unlocked wheels can
allow the station to move
unexpectedly.
Do not use drawers as steps. Station
may tip, causing injury.
FPO
Lock all drawers before moving the station.
Unplug power strip before moving the
station.
FUNCTIONAL DESCRIPTION
6
1. Top tray frame
2. Tooling cup
3. Fold-out work tray
4. Side handle
5. Grommet
6. Power strip
7. Cord storage
brackets
3
5
8. Post
9. Bumper
10. Storage tray
11. Swivel caster with
brake
12. Bottom tray frame
13. Rigid caster
14. Storage bar
9
10
11
4
7
8
13
14
1
12
2
GROUNDING
WARNING
Improperly connecting the ground-
ing wire can result in the risk of
electric shock. Check with a qualied electrician
if you are in doubt as to whether the outlet is
properly grounded. Do not modify the plug pro-
vided with the station. Never remove the ground-
ing prong from the plug. Do not use the station
if the cord or plug is damaged. If damaged, have
it repaired before use. If the plug will not t the
outlet, have a proper outlet installed by a qualied
electrician.
Stations
with Three Prong Plugs
Stations marked “Grounding Required” have a
power strip with a three wire cord and three prong
grounding plug. The plug must be connected to a
properly grounded outlet (See Figure A). If the
power strip should electrically malfunction or break
down, grounding provides a low resistance path to
carry electricity away from the user,
Fig. A
reducing the risk of electric shock.
The grounding prong in the plug is
connected through the green wire
inside the cord to the grounding sys-
tem in the power strip. The green wire in the cord
must be the only wire connected to the power strip's
grounding system and must never be attached to an
electrically “live” terminal.
Your power strip must be plugged into an appropriate
outlet, properly installed and grounded in accordance
with all codes and ordinances. The plug and outlet
should look like those in Figure A.
ASSEMBLY
CAUTION
Be sure to follow the assembly in-
structions for the appropriate sta-
tion. Do not use power tools to assemble station.
Tighten bolts with hand wrenches.
Tools Required
Phillips
screwdriver
Safety
goggles
10 mm
Wrench
13 mm
Wrench
Hardware Included
NOTE: Items not shown to actual size. Hardware
lengths are approximate.
Hardware Item Description Quantity
AA Screw M6 x 16L 40
BB Screw M8 x 18L 16
CC Washer
M19 x 8.5 x 2 16
DD Screw M4 x 12L 8
EE Screw M6 x 25L 2

Specyfikacje produktu

Marka: Milwaukee
Kategoria: Niesklasyfikowane
Model: 48-22-8590

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Milwaukee 48-22-8590, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Milwaukee

Milwaukee

Milwaukee M12 302-21 Instrukcja

14 Października 2024
Milwaukee

Milwaukee M12 BPRT Instrukcja

4 Października 2024
Milwaukee

Milwaukee M12 FHIR38 Instrukcja

4 Października 2024
Milwaukee

Milwaukee M12 FIR12 Instrukcja

4 Października 2024
Milwaukee

Milwaukee M18 BI Instrukcja

4 Października 2024
Milwaukee

Milwaukee WCE 30 Instrukcja

3 Października 2024
Milwaukee

Milwaukee STC46-1 Instrukcja

3 Października 2024
Milwaukee

Milwaukee STC30-1 Instrukcja

3 Października 2024
Milwaukee

Milwaukee M18 FOPH-EA Instrukcja

3 Października 2024
Milwaukee

Milwaukee M28 C Instrukcja

3 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024