Instrukcja obsługi Milwaukee 48-22-8539

Milwaukee Niesklasyfikowane 48-22-8539

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Milwaukee 48-22-8539 (20 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/20

Cat. No. / No de cat.

48-22-8539, 48-22-8540

40" MOBILE WORK STATION

POSTE DE TRAVAIL MOBILE DE 1,01 m (40")

ESTACIÓN DE TRABAJO MÓVIL DE 1,01 m (40")

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

Read all safety warnings and all

instructions. Failure to follow the

warnings and instructions may result in serious in-

jury. Save all warnings and instructions for future

reference.

•Use the station and accessories in accordance

with these instructions and in the manner in-

tended, taking into account the working conditions.

Use of the station for operations dierent from those

intended could result in a hazardous situation.

•Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

• -Fully assemble the station according to the as

sembly instructions. Do not leave o any pieces.

•Do not modify the station in any way. Use only

specifically recommended accessories. Drilling

holes or modifying the station will lower the load

capacity, which can cause the station to collapse,

resulting in injury.

•Lock wheels when station is not being moved.

Unlocked wheels can allow the station to move

unexpectedly.

•Keep the station on a level surface. Do not load,

unload, or park station on an incline. The station

may become unbalanced and tip, resulting in injury.

•Always balance the station load to avoid tipping.

Unbalanced stations are more likely to tip when be-

ing moved or when using the station work surfaces.

Evenly distribute the weight front to back and side

to side. To help prevent the station from tipping,

load the product starting with the bottom drawers.

• Do not exceed the maximum product weight,

including contents. Do not exceed the maximum

weight for each drawer. Overloaded stations can

tip, collapse, or damage drawer slides.

• Do not open more than one drawer at a time.

Station may tip, causing injury.

•Keep children and bystanders away while load-

ing, unloading, and moving the station. Distrac-

tions can cause you to lose control.

•Only lift the station according to the instructions

in this manual. Never lift by the side handle. Other

methods may be dangerous, resulting in injury.

• Only transport the station when empty. Properly

secure when transporting.

• Do not mount the station on a truck bed or any

other moving object.

• Lock all drawers before rolling the station. The

drawers could come open and make the station

unstable and tip.

• Only roll the station short distances by using

the handle provided.

• Secure all items before rolling the station. Loose

items could shift, causing the station to become

unstable.

• Do not use drawers as steps. Do not stand

on the station. Station may tip, causing injury.

• Do not step on side shelf. Shelf may collapse or

break. Station may tip, causing injury.

•Do not use station in explosive atmospheres,

such as in the presence of ammable liquids, gases

or dust. This equipment has internal arcing or spark-

ing parts. Station should not be located in a recessed

area or below oor level.

•Station plugs must match the outlet. Never mod-

ify the plug in any way. Do not use any adapter

plugs with earth (grounded) chest/cabinet power

strips. Unmodied plugs and matching outlets will

reduce risk of electric shock.

•Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

•Maintain station. Check for misalignment or bind-

ing wheels, breakage or bending of drawer slides or

other parts and any other condition that may aect

the station's operation. Do not use damaged station.

•Maintain labels and nameplates. These carry

important information. If unreadable or missing,

contact a MILWAUKEE service facility for a free

replacement.

•Have your station serviced by a qualied repair

person using only identical replacement parts.

This will ensure that the safety of the station is

maintained.

Federal Communications Commission

WARNING: Changes or modications to this unit

not expressly approved by the party responsible for

compliance could void the user’s authority to operate

the equipment.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

NOTE: This equipment has been tested and found to

comply with the limits for a Class B digital device, pur-

suant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harm-

ful interference to radio communications. However,

there is no guarantee that interference will not occur

in a particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning the

equipment o and on, the user is encouraged to try

to correct the interference by one or more of the fol-

lowing measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit

dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV

technician for help.

GROUNDING

WARNING

Improperly connecting the ground-

ing wire can result in the risk of

electric shock. Check with a qualied electrician

if you are in doubt as to whether the outlet is

properly grounded. Do not modify the plug pro-

vided with the station. Never remove the ground-

ing prong from the plug. Do not use the station

if the cord or plug is damaged. If damaged, have

it repaired before use. If the plug will not t the

outlet, have a proper outlet installed by a qualied

electrician.

Stations

with Three Prong Plugs

Stations marked “Grounding Required” have a

power strip with a three wire cord and three prong

grounding plug. The plug must be connected to a

properly grounded outlet (See Figure A). If the

power strip should electrically malfunction or break

down, grounding provides a low resistance path to

carry electricity away from the user,

Fig. A

reducing the risk of electric shock.

The grounding prong in the plug is

connected through the green wire

inside the cord to the grounding sys-

tem in the power strip. The green wire in the cord

must be the only wire connected to the power strip's

grounding system and must never be attached to an

electrically “live” terminal.

Your power strip must be plugged into an appropriate

outlet, properly installed and grounded in accordance

with all codes and ordinances. The plug and outlet

should look like those in Figure A.

SYMBOLOGY

Warning

Read Operator's Manual

Electrical Shock Hazard

Do not open more than one drawer at a

time. Station may tip, causing injury.

Lock wheels when station is not

being moved. Unlocked wheels can

allow the station to move

unexpectedly.

Do not use drawers as steps. Station

may tip, causing injury.

FPO

Lock all drawers before moving the station.

Do not step on side shelf. Shelf may

collapse or break. Station may tip, causing

injury.

SPECIFICATIONS

Cat. No. 48-22-8539, 48-22-8540

............................

Two-Slide Drawer Capacity 100 lbs. (45.4 kg)

.........

Four-Slide Drawer Capacity 200 lbs. (90.7 kg)

........

Total Capacity 1800 lbs. (816.5 kg)

..........................

AC Input Volts 120 ....................................................

Hertz 60 ....................................................................

Amps 15 ...................................................................

USB Output Volts...................................................5

USB Watts 10.5 ........................................................

USB Amps

..........................................................

2.1

Recommended Ambient Operating

Temperature 0°F to 104°F (-18°C to 40°C) ...........

FUNCTIONAL DESCRIPTION

1. Work surface*

2. Bottle opener

3. Lock

4. Key

5. Tool organizer

6. Rigid caster

7. Drawer divider

8. Drawer slide

9. Swivel caster with

brake

10. Bumper

11. Storage shelf

12. Cabinet corner

extrusion

13. Cord storage

brackets

14. Charger mounts

15. Power strip with

USB ports

16. Side handle

910

* Cat. No. 48-22-8539 features a wooden work surface.

Cat. No. 48-22-8540 features a steel work surface.

Specyfikacje produktu

Marka:	Milwaukee
Kategoria:	Niesklasyfikowane
Model:	48-22-8539
Kolor produktu:	Biały
Typ produktu:	Lampka nocna do gniazdka
Nadaje się do użytku w pomieszczeniach:	Tak
Żywotność żarówki:	30000 h
Kąt wiązki:	50 °
Rodzaj zasilania:	AC,Battery
Materiał obudowy:	Plastik
Wbudowany wyłącznik:	Tak
Częstotliwość wejściowa AC:	50 Hz
Napięcie wejściowe AC:	230 V
Waga produktu:	200 g
Szerokość opakowania:	238 mm
Wysokość opakowania:	58 mm
Głębokość opakowania:	138 mm
Klasa efektywności energetycznej (stara):	A++
Waga wraz z opakowaniem:	255 g
Typ lamp:	LED
Lampy:	0.9 W
Kolor światła:	Biały
Rodzaj opakowania:	Blister
Baterie w zestawie:	Tak
Czujnik ruchu:	Tak
Strumień świetlny:	65 lm
Temperatura koloru:	6500 K
Ekwiwalent moc żarówki:	80 W
Czujnik światła:	Tak
Żarówki w zestawie:	Tak
Współczynnik oddawania barw (CRI):	80
Maksymalna moc wymiennego źródła światła:	1.6 W
Ilość cykli przełączeń:	15000
W zestawie 2 Moc żarówki:	0.7 W
Skrzynie zbiorcze (zewnętrzne) na paletę (kontener intermodalny 20ft):	11287 szt.