Instrukcja obsługi Milwaukee 2679-22

Milwaukee Niesklasyfikowane 2679-22

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Milwaukee 2679-22 (20 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/20
Cat. No. / No de cat.
2679-20
M18™ FORCE LOGIC™ 600 MCM CRIMPER
SERTISSEUR UTILITAIRE 600 MCM M18™ FORCE LOGIC™
CRIMPADORA 600 MCM UTILITARIA M18™ FORCE LOGIC™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
3
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, ush with water. If liquid con-
tacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
• Do not use a battery pack or tool that is dam-
aged or modied. Damaged or modied batteries
may exhibit unpredictable behavior resulting in re,
explosion or risk of injury.
• Do not expose a battery pack or tool to re or
excessive temperature. Exposure to re or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specied in the instructions.
Charging improperly or at temperatures outside the
specied range may damage the battery and increase
the risk of re.
SERVICE
• Have your power tool serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
CRIMPER
• Use tool only as directed. Only trained personnel
should operate tool.
•
WARNING
To reduce the risk of arc ash,
electric shock and property
damage, work on deenergized lines when
possible. Tool is not insulated. Should work
on energized lines be required, ensure all proper
precautions, including those contained in NFPA
70E, have been taken rst.
• Use tool only with MILWAUKEE crimping jaw
49-16-U000 or 49-16-U111, "U" dies, and con-
nectors for which they are rated. Jaws, dies,
and connectors must be used in an APPROVED
COMBINATION to achieve a successful opera-
tion. Improper combinations can result in a faulty
crimp. Electric shock, re, explosion, and property
damage could occur.
• Do not use tool without jaws installed. Fingers
could be injured.
• Keep hands away from jaws while tool is in use.
Fingers could be injured.
•To reduce the risk of injury, wear safety goggles
or glasses with side shields when operating or
servicing the tool.
• Inspect and discard workpieces with cracks or
wear before use. Materials may crack or shatter.
• Follow installation specications as specied in
Table A using an Approved Combination of jaws,
dies, connectors and cables as indicated. Other
uses may cause damage to the tool, accessories,
and workpiece.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry im-
portant information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
•
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
lter out microscopic particles.
SPECIFICATIONS
Cat. No. 2679-20 .....................................................
Volts .............................................................. 18 DC
Battery Type .................................................M18™
Charger Type ................................................M18™
Operating Temp ..................................... 0° - 122° F
Force ............................................................6 Tons
Crimping Jaws
Cat. No 49-16-U000 .................................................
Jaw Type .........................M18™ 600 MCM U Style
Crimping Jaw
Max. Crimping Capacity .......................... 600 MCM
Cu/350 MCM AI
Cat. No 49-16-U111 .................................................
Jaw Type .........................M18™ 750 MCM U Style
Crimping Jaw
Max. Crimping Capacity .......................... 750 MCM
Cu/750 MCM AI
Cable Cutting Jaws
Cat. No 49-16-2780 .................................................
Jaw Type .........M18™ 750 MCM Cu/1000 MCM AI
Cable Cutting Jaws
Max. Cutting Capacity ............................. 750 MCM
Cu/1000 MCM AI
Replacement Blades .............. Cat. No. 48-44-0411
FUNCTIONAL DESCRIPTION
1
1. Locking thumb screw
2. Backup release valve
3. Crimping indicator
4. Hanger
5. LEDs
6. ONE-KEY™ indicator
7. Handle
8. Trigger
9. Crimping jaws
10. Die release tabs
11. Retaining pin
2
11
8
9
10
7 5 4
6
3

Specyfikacje produktu

Marka: Milwaukee
Kategoria: Niesklasyfikowane
Model: 2679-22

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Milwaukee 2679-22, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Milwaukee

Milwaukee

Milwaukee M12 302-21 Instrukcja

14 Października 2024
Milwaukee

Milwaukee M12 BPRT Instrukcja

4 Października 2024
Milwaukee

Milwaukee M12 FHIR38 Instrukcja

4 Października 2024
Milwaukee

Milwaukee M12 FIR12 Instrukcja

4 Października 2024
Milwaukee

Milwaukee M18 BI Instrukcja

4 Października 2024
Milwaukee

Milwaukee WCE 30 Instrukcja

3 Października 2024
Milwaukee

Milwaukee STC46-1 Instrukcja

3 Października 2024
Milwaukee

Milwaukee STC30-1 Instrukcja

3 Października 2024
Milwaukee

Milwaukee M18 FOPH-EA Instrukcja

3 Października 2024
Milwaukee

Milwaukee M28 C Instrukcja

3 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024