Instrukcja obsługi Mikrotik wAP LTE kit

Mikrotik Niesklasyfikowane wAP LTE kit

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Mikrotik wAP LTE kit (11 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/11
wAP kit-series
wAP kit-series
wAP kit-series
wAP kit-serieswAP kit-series
This manual is for wAP kit series models:
This manual is for wAP kit series models:
This manual is for wAP kit series models:
This manual is for wAP kit series models:This manual is for wAP kit series models:
wAP LTE kit
wAP LTE kit US
wAP 4G kit
This device needs to be upgraded to RouterOS v6.44.6 or the latest version to ensure compliance with local authority regulations.
Note. The information contained here is subject to change. Please visit the product page on
www.mikrotik.com for the most up to date version of this
document.
Safety Warnings
It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling
requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik radio devices must be professionally installed.
1.
Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing
accidents.
Ultimate disposal of this product should be handled according to all national laws and regulations.
All installation methods for mounting an access point on any wall surface is subject to the acceptance of local jurisdiction.
The Installation of the equipment must comply with local and national electrical codes.
This product is intended to be mounted outdoors on a pole but can also be installed indoors. Please read the mounting instructions carefully before
beginning installation. Failure to use the correct hardware and configuration or to follow the correct procedures could result in a hazardous situation to
people and damage to the system.
Use only the power supply and accessories approved by the manufacturer, and which can be found in the original packaging of this product.
Read the installation instructions before connecting the system to the power source.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your
own risk!
In the case of device failure, please disconnect it from power. The fastest way to do so is by unplugging the power plug from the power outlet.
It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling
requirements, and Dynamic Frequency Selection (DFS) requirements. All Mikrotik radio devices must be professionally installed.
This is a class A device. In a domestic environment, this product might cause radio interference in which case the user might be required to take adequate
measures.
Exposure to Radio Frequency Radiation:
Exposure to Radio Frequency Radiation:
Exposure to Radio Frequency Radiation:
Exposure to Radio Frequency Radiation:Exposure to Radio Frequency Radiation:This MikroTik equipment complies with the FCC, IC, and European Union radiation exposure limits set forth for an
uncontrolled environment.This MikroTik device should be installed and operated no closer than 38 centimeters from your body, occupational user, or the
general public.
Quickstart
Use a Phillips head screwdriver to loosen the screw, which secures the bottom lid (see ).Bottom Lid
Insert the SIM card.
Choose your powering solution, please see the section for possibilities.Powering
Connect the Ethernet cable to the PoE and connect the other end of the Ethernet cable to this MikroTik router. Plug the provided power supply
into the PoE injector.
Wireless AP mode is enabled by default, you can connect from your computer to the SSID that begins with "MikroTik". The configuration interface
is available via a web browser. The address is .https://192.168.88.1
Connect to the wireless network, open in your web browser to start the configuration.https://192.168.88.1
User name: a and there is no password by default you will be logged in automatically to the Quick Set screen
dmin
(or, for some models, check
.user and wireless passwords on the sticker)
Click the "Check for updates" button on the right side and updating your RouterOS software to the latest version to ensure the best performance
and stability. Must have a valid SIM card inserted.
To personalize your wireless network, SSID can be changed in the fields "Network Name";
Choose your country on the left side of the screen in the field "Country", to apply country regulation settings.
Set up your wireless network password in the field "WiFi Password" the password must be at least eight symbols.
Set up your router password in the bottom field "Password" to the right and repeat it in the field "Confirm Password", it will be used to login next
time.
Click on the "Apply Configuration" to save changes.
To manually update the device if no Internet connection is available.
Download the latest RouterOS software from .https://mikrotik.com/download
Choose MIPSBE packages, and save them to your PC.
Connect again and in menu upload downloaded packages.
Files
Restart the device.
MikroTik mobile app
Use the MikroTik smartphone app to configure your router in the field, or to apply the most basic initial settings for your MikroTik home access point.
Scan QR code and choose your preferred OS.
2.
3.
4.
5.
6.
Install and open application.
By default, the IP address and user name will be already entered.
Click Connect to establish a connection to your device through a wireless network.
Choose Quick setup and application will guide you through all basic configuration settings in a couple of easy steps.
An advanced menu is available to fully configure all necessary settings.
Powering
PoE Input
PoE Input
PoE Input
PoE InputPoE Input
The ethernet port accepts 9-30 V passive PoE power. The box contains a 24 V adapter and a PoE injector. Plug the
included PoE injector into the first or internet port of the router that you will use in your LAN (or directly into your
laptop) and attach an ethernet cable to the PoE injector. Connect the other end of this ethernet cable to the wAP
LTE device. Plug the power supply into the PoE injector
Power jack
Power jack
Power jack
Power jackPower jack
The DC jack (5.5 mm outside and 2 mm inside diameter, female, pin positive plug) supports 9-30 V power, the
the device comes with a 24 V 1.2 A power adapter
Automotive connector
Automotive connector
Automotive connector
Automotive connectorAutomotive connector
The automotive connector can be used to power the device from regular 12/24 V connections in automobiles and
buses. The plug has four pins: bottom left (black) is the ground, bottom right is power in (red). The upper two are
reserved for future use.
Maximum power consumption at 24 V is 6 W without miniPCIe, and 8 W with a full load on the miniPCIe card.
Mounting

Specyfikacje produktu

Marka: Mikrotik
Kategoria: Niesklasyfikowane
Model: wAP LTE kit

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Mikrotik wAP LTE kit, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Mikrotik

Mikrotik

Mikrotik CRS320-8P-8B-4S Instrukcja

7 Października 2024
Mikrotik

Mikrotik Woobm-USB Instrukcja

3 Października 2024
Mikrotik

Mikrotik CME22-2n-BG77 Instrukcja

29 Września 2024
Mikrotik

Mikrotik CRS354-48P-4S+2Q+RM Instrukcja

27 Września 2024
Mikrotik

Mikrotik hAP ac³ Instrukcja

26 Września 2024
Mikrotik

Mikrotik L009UiGS-2HaxD-IN Instrukcja

26 Września 2024
Mikrotik

Mikrotik hAP ax² Instrukcja

26 Września 2024
Mikrotik

Mikrotik hAP ax³ Instrukcja

26 Września 2024
Mikrotik

Mikrotik hAP Instrukcja

26 Września 2024
Mikrotik

Mikrotik hAP lite Instrukcja

26 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024