Instrukcja obsługi Mikrotik RB911-5HND

Mikrotik Niesklasyfikowane RB911-5HND

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Mikrotik RB911-5HND (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/3

RouterBOARD 900 series

Quick Setup Guide and Warranty Information

RB900 is a RouterBOARD device family with a built-in 802.11 wireless device and one Ethernet port. Several mod-

els are available with 5GHz or 2GHz 802.11n or 5GHz 802.11ac wireless, with SFP slot, and miniPCIe slot.

First use

• Connect antenna cables to the built in Wi-Fi connectors

• Device accepts 8-30V with a passive PoE powered Ethernet cable or with a power connector to the Power

Jack

Powering

The board accepts power with the following modes:

•Passive 8-30V PoE to ethernet port. Higher voltage needed to compensate for power loss on long cables;

at least 18V suggested.

•Direct input to the power jack 8-30V (select models only)

Booting process

RouterOS is the operating system of all RouterBOARD routers. Please see documentation here: http://mt.lv/help

This device doesn't come fitted with a Serial Port connector, so initial connection has to be done via the Ethernet

cable, using the MikroTik Winbox utility. Winbox should be used to connect to the default IP address of

192.168.88.1 adminwith the username and . no password

In case you wish to boot the device from network, for example to use MikroTik Netinstall, hold the RESET button of

the device when starting it until the LED light turns off, and Groove will start to look for Netinstall servers.

In case IP connection is not available, the Winbox utility can also be used to connect to the MAC address of the

device. More information in the documentation.

Extension Slots and Ports

•One Ethernet port (With Auto MDI/X so you can use either straight or cross-over cables for connecting to

other network devices). The Ethernet port accepts 8-30V DC powering from a passive PoE injector.

•Built-in 802.11b/g/n WiFi card (AR9342) with one or two MMCX connectors

•Only RB912UAG-2HPnD/RB912-5HPnD/RB922UAGS-5HPacD/RB922UAGS-5HPacT: !

miniPCI-e slot for either a 802.11 Wireless card, or a 3G modem (when a 3G modem is used in miniPCIe

slot, USB port will become inactive. In RouterOS you can select which of the 3G modems you want to use,

USB or miniPCIe). SIM slot is available for miniPCIe 3G cards.

•Only RB922UAGS-5HPacD/ RB922UAGS-5HPacT: !

One SFP port for 1.25GBit modules, DDMI support

Buttons and Jumpers

•RouterOS reset jumper hole – resets RouterOS software to defaults. Must short circuit the metallic sides of

the hole (with a screwdriver, for example) and boot the device. Hold screwdriver in place until RouterOS

configuration is cleared.

•Reset button – Holding this button during boot time will make the RouterBOARD look for Netinstall servers.

Release the button after the LED light goes out.

Operating System Support

Currently tested operating system is MikroTik RouterOS (starting from version v6.30).

See www.routerboard.com for more information. Contact support@mikrotik.com for support questions. 26 Oct 2016

Federal Communication Commission Interference Statement

List of FCC IDs: RB921UAGS-5SHPacD-OUT (NetMetal), RB921UAGS-5SHPacT-OUT (NetMetal),

- FCCID: TV7RB921-5SHPACT; RB922UAGS-5HPacD-OUT (NetMetal), RB922UAGS-5HPacT-OUT

(NetMetal), RB922UAGS-5HPacD, RB911G-5HPacD, RB911G-5HPacD-OUT (NetBox) - FCCID: TV7RB922-5H-

PACT!

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a res-

idential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accor-

dance with the instructions, may cause harmful interference to radio communications. However, there is no guaran-

tee that interference will not occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. This device and its antenna must not be co-located or operation

in conjunction with any other antenna or transmitter.

IMPORTANT: Exposure to Radio Frequency Radiation.

63 cm minimum distance has to be maintained between the antenna and the occupational user and 140 cm to

general public. Under such configuration, the FCC radiation exposure limits set forth for an population/uncontrolled

environment can be satisfied.

List of additional approved antennas

• Omni Directional (fiberglass pole) WLO-2450-15 15 dBi

• Omni Directional (hor. polarization) HP, ODH 24-13 13 dBi

• Sector SA 24-90-17-WB 17 dBi

• Panel WLP-2450-20 20 dBi

• Dish DC 24-HD-PFIP 24 dBi

Antenna Installation. WARNING: It is installer's responsibility to ensure that when using the authorized antennas in

the United States (or where FCC rules apply); only those antennas certified with the product are used. The use of

any antenna other than those certified with the product is expressly forbidden in accordance to FCC rules CFR47

part 15.204. The installer should configure the output power level of antennas, according to country regulations and

per antenna type. Professional installation is required of equipment with connectors to ensure compliance with

health and safety issues.

See www.routerboard.com for more information. Contact support@mikrotik.com for support questions. 26 Oct 2016

CE Declaration of Conformity

Full Declaration of Conformity (DoC) may be obtained by visiting this web page: !

http://routerboard.com/doc/

EN. Instruction manual: Connect the power adapter to turn on the device. Open 192.168.88.1 in your web browser, to configure it. More infor-

mation on : http://wiki.mikrotik.com BG. Инструкция Свържете адаптера на захранване за да включите устройството Отворете , .

192.168.88.1 в уеб браузър за да настроите продукта Повече информация в, . http://wiki.mikrotik.com CZ. Návod k pou itíž: P ipojte napá -ř

jecí adaptér k zapnutí p ístroje. Otev ete 192.168.88.1 ve webovém prohlí e i pro konfiguraci produktu. Více informací najdete v ř ř ž č http://wik-

i.mikrotik.com DK. Instruktionsbog: Tilslut strømadapteren for at tænde for enheden. Åbn 192.168.88.1 i en webbrowser til at konfigurere pro-

duktet. Mere information i : Connectez l'adaptateur d'alimentation pour allumer l'appareil. Ouvrez http://wiki.mikrotik.com FR. Mode d'emploi

192.168.88.1 dans un navigateur Web pour configurer le produit. Plus d'informations dans http://wiki.mikrotik.com DE. Bedienungsanleitung:

Verbinden Sie das Netzteil, um das Gerät einzuschalten. Öffnen Sie 192.168.88.1 in einem Web-Browser, um das Produkt zu konfigurieren.

Weitere Informationen im : Ühendage toiteadapter seadme sisselülitamiseks. Avatud 192.168.88.1 http://wiki.mikrotik.com EE. Kasutusjuhend

in veebilehitseja seadistada toodet. Rohkem teavet : Conecte el adaptador de ali-http://wiki.mikrotik.com ES. Manual de instrucciones

mentación para encender la unidad. Abra 192.168.88.1 en un navegador web para configurar el producto. Más información en http://wik-

i.mikrotik.com IT. Manuale di istruzioni: Collegare l'adattatore di alimentazione per accendere l'unità. Aprire 192.168.88.1 in un browser Web

per configurare il prodotto. Maggiori informazioni in http://wiki.mikrotik.com LV. Lieto anas instrukcijaš: Pievienojiet Str vas adapteri, lai iesl g-ā ē

tu ier ci. Atv rt 192.168.88.1 ar interneta p rl ku, lai konfigur tu produktu. Pla ka inform cija ī ē ā ū ē šā ā http://wiki.mikrotik.com LT. Naudojimosi in-

strukcija: Prijunkite maitinimo adapter junkite rengin . interneto nar ykl 192.168.88.1 Atidarykite galite konfig ruoti gamin . Daugiau infor-į į į į Į š ę ū į

macijos rasite : Csatlakoztassa a hálózati adaptert a készülék bekapcsolásához. Megnyitása http://wiki.mikrotik.com HU. Használati utasítás

192.168.88.1 egy webböngész ben beállítani a terméket. Több információ : Sluit voedingsadapter aan őhttp://wiki.mikrotik.com NL. Handleiding

op het apparaat in te schakelen. Open 192.168.88.1 in een webbrowser om het product te configureren. Meer informatie in http://wiki.mikrotik.-

com PL. Instrukcja obs ugił: Pod cz adapter zasilania, aby w czy urz dzenie. Otwórz 192.168.88.1 w przegl darce internetowej, aby skon-łą łą ć ą ą

figurowa urz dzenie. Wi cej informacji w ć ą ę http://wiki.mikrotik.com PT. Manual de instruções: Conecte o adaptador de alimentação para ligar o

aparelho. Abra 192.168.88.1 em um navegador da web para configurar o produto. Mais informações em http://wiki.mikrotik.com RO. Instruc i -ț

uni de utilizare : Conecta i adaptorul de alimentare pentru a porni aparatul. Deschide 192.168.88.1 într-un browser web pentru a configura ț

produsul. Mai multe informa ii în : Pripojte napájací adaptér k zapnutiu prístroja. Otvorte țhttp://wiki.mikrotik.com SK. Návod na pou itie ž

192.168.88.1 vo webovom prehliada i pre konfiguráciu produktu. Viac informácií nájdete v : Priklju ite na-čhttp://wiki.mikrotik.com SI. Navodila č

pajalnik za vklop naprave. Odprite 192.168.88.1 v spletnem brskalniku nastaviti izdelek. Ve informacij v čhttp://wiki.mikrotik.com FI. Käyttöohje:

Kytke virtalähde päälle laitteen. Avaa 192.168.88.1 in selaimen määrittää tuotteen. Lisää tietoa http://wiki.mikrotik.com SE. Instruktionsmanu-

al: Anslut nätadaptern för att slå på enheten. Öppna 192.168.88.1 i en webbläsare för att konfigurera produkten. Mer information på http://wik-

i.mikrotik.com NO. Bruksanvisningen: Koble strømadapteren for å slå på enheten. Åpne 192.168.88.1 i en nettleser for å konfigurere produk-

tet. Mer informasjon på : µ http://wiki.mikrotik.com GR. εγχειρίδιο οδηγιών Συνδέστε τον προσαρ ογέα τροφοδοσίας για να ενεργοποιήσετε τη

µ . ονάδα Ανοίξτε σε ένα πρόγρα α περιήγησης στο για να δια ορφώσετε το προϊόν Περισσότερες πληροφορίες στο 192.168.88.1 µµ Web µ . http://

wiki.mikrotik.com

[EN] English

Hereby, MIKROT KLS SIA declares that this ROUTERBOARD is in compliance with the essential requirements and other relevant provisions Ī

of Directive 1999/5/EC.

[BG] Bulgarian

С настоящето Ī , MIKROT KLS SIA , ROUTERBOARD декларира че е в съответствие със съществените изисквания и другитеприложими

разпоредби на Директива 1999/5/EC.

[CZ] Czech

MIKROT KLS SIA tímto prohla uje, e ROUTERBOARD spl uje základní po adavky a v echna p íslu ná ustanoveni Sm rnice 1999/5/ES.Ī š ž ň ž š ř š ě

[DK] Danish

Undertegnede MIKROT KLS SIA erklærer herved, at følgende udstyr ROUTERBOARD overholder de væsentlige krav og øvrige relevante Ī

krav i direktiv 1999/5/EF.

[DE] German

Hiermit erklärt MIKROT KLS SIA dass sich das Gerät ROUTERBOARD in Übereinstimmung mit den grundlegenden Anforderungen und den Ī

übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.

[EE] Estonian

Käesolevaga kinnitab MIKROT KLS SIA seadme ROUTERBOARD vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tu-Ī

lenevatele teistele asjakohastele sätetele.

[GR] Greek

ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Ο ΚΑΤΑΣΚΕΥΑΣΤΗΣ Ī MIKROT KLS SIA ΔΗΛΩΝΕΙ ΟΤΙ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ROUTERBOARD

ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ ΕΚ 1999/5/

[ES] Spanish

Por la presente, MIKROT KLS SIA declara que este ROUTERBOARD cumple con los requisitos esenciales y otras exigencias relevantes de laĪ

Directiva 1999/5/EC.

[IT] Italian

Con la presente MIKROT KLS SIA dichiara che questo ROUTERBOARD è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti Ī

stabilite dalla direttiva 1999/5/CE.

[LV] Latvian

Ar o MIKROT KLS SIA deklar , ka ROUTERBOARD atbilst Direkt vas 1999/5/EK b tiskaj m pras b m un citiem ar to saist tajiem noteiku-š Ī ē ī ū ā ī ā ī

miem.

[LT] Lithuanian

Š Īiuo MIKROT KLS SIA deklaruoja, kad is ROUTERBOARD atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatasš

[HU] Hungarian

A MIKROT KLS SIA ezzennel kijelenti, hogy a ROUTERBOARD típusú beren-dezés teljesíti az alapvet követelményeket és más 1999/5/EK Ī ő

irányelvben meghatározott vonatkozó rendelkezéseket.

[NL] Dutch

Hierbij verklaart MIKROT KLS SIA dat het toestel l ROUTERBOARD in overeenstemming is met de essentiële eisen en de andere relevante Ī

bepalin-gen van richtlijn 1999/5/EG.

[PL] Polish

Niniejszym MIKROT KLS SIA deklaruje e ROUTERBOARD jest zgodny z zasadniczymi wymaganiami i innymi w a ciwymi postanowieniami Ī ż ł ś

Dyrektywy 1999/5/EC.

[PT] Portuguese

Eu, MIKROT KLS SIA declaro que o ROUTERBOARD cumpre os requisitos essenciais e outras provisões relevantes da Directiva 1999/5/EC.Ī

[RO] Romanian

Prin prezenta, MIKROT KLS SIA declar c aparatul ROUTERBOARD este în conformitate cu cerin ele esen iale i cu alte prevederi perti-Ī ă ă ţ ţ ş

nente ale Directivei 1999/5/CE..

[SK] Slovak

MIKROT KLS SIA t mto vyhlasuje, e ROUTERBOARD sp a základné po iadavky a v etky príslu né ustanovenia Smernice 1999/5/ES.Ī ý ž ĺň ž š š

[SI] Slovenian

MIKROT KLS SIA izjavlja, da je ta ROUTERBOARD v skladu z bistvenimi zahtevami in drugimi relevantnimi dolo ili direktive 1999/5/ES.Ī č

[FI] Finish

MIKROT KLS SIA vakuuttaa täten että ROUTERBOARD tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien Ī

direktiivin muiden ehtojen mukainen.

[SE] Swedish

Härmed intygar MIKROT KLS SIA att denna RouterBOARD är i överensstämmelse med de väsentliga egenskapskrav och övriga relevanta Ī

bestämmelser som framgår av direktiv 1999/5/EG.

[NO] Norwegian

MIKROT KLS SIA Erklærer herved at ROUTERBOARD er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.Ī

See www.routerboard.com for more information. Contact support@mikrotik.com for support questions. 26 Oct 2016

Specyfikacje produktu

Marka:	Mikrotik
Kategoria:	Niesklasyfikowane
Model:	RB911-5HND

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Mikrotik RB911-5HND, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane Mikrotik

Mikrotik CRS320-8P-8B-4S Instrukcja

7 Października 2024

Mikrotik Woobm-USB Instrukcja

3 Października 2024

Mikrotik CME22-2n-BG77 Instrukcja

29 Września 2024

Mikrotik CRS354-48P-4S+2Q+RM Instrukcja

27 Września 2024

Mikrotik hAP ac³ Instrukcja

26 Września 2024

Mikrotik L009UiGS-2HaxD-IN Instrukcja

26 Września 2024

Mikrotik hAP ax² Instrukcja

26 Września 2024

Mikrotik hAP ax³ Instrukcja

26 Września 2024

Mikrotik hAP Instrukcja

26 Września 2024

Mikrotik hAP lite Instrukcja

26 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024

Stihl HT 70 Instrukcja

15 Października 2024

Ernesto H14270 Instrukcja

15 Października 2024

Uniden BT MIC KIT Instrukcja

15 Października 2024

Vaude Omnis Bike 26 Instrukcja

15 Października 2024

ART ProChannel II Instrukcja

15 Października 2024

Aukey DR02J Instrukcja

15 Października 2024

Master Lock 653EURD Instrukcja

15 Października 2024

Roland FR-18 Diatonic Instrukcja

15 Października 2024