Instrukcja obsługi Midea MVi-260WV2GN1(A)

Midea klimatyzacja MVi-260WV2GN1(A)

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Midea MVi-260WV2GN1(A) (29 stron) w kategorii klimatyzacja. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/29
DC INVERTER FREE
INSTALLATION MANUAL
Original instructions
Thank you very much for purchasing our air conditioner.
Before using your air conditioner, please read this manual carefully and keep it for future reference.
CAUTION
CONTENTS PAGE
Ensure that all Local, National and International regulations
are satisfied.
Read this ”PRECAUTIONS ” carefully before Installation.
The precautions described below include the important
items regarding safety. Observe them without fail.
After the installation work, perform a trial operation to check
for any problem.
Follow the Owner’s Manual to explain how to use and
maintain the unit to the customer.
Turn off the main power supply switch (or breaker) before
maintenance the unit .
Ask the customer that the Installation Manual and the Owner’s
Manual should be kept together .
New Refrigerant Air Conditioner Installation
CAUTION
Do not connect the Appliance from Main Power Supply directly.
WARNING
THIS AIR CONDITIONER ADOPTS THE NEW HFC
REFRIGERANT(R410A)WHICH DOES NOT DESTROY OZONE
LAYER.
The characteristics of R410A refrigerant are; Hydrophilic, oxid-
izing membrane or oil, and its pressure is approx.1.6 times high-
er than that of refrigerant R22.Accompanied with the new refrig-
erant, refrigerating oil has also been changed ,Therefore, during
installation work, be sure that water, dust, former refrigerant, or
refrigerating oil does not enter the refrigerating cycle.
To prevent charging an incorrect refrigerant and refrigerating oil,
the sizes of connecting sections of charging port of the main
unit and installation tools are charged from those for the
conventional refrigerant.
Accordingly the exclusive tools are required for the new
refrigerant (R410A):
For connecting pipes, use new and clean piping designed for
R410A,and please care so that water or dust does not enter.
Moreover, do not use the existing piping because there are
problems with pressure-resistance force and impurity in it.
Ask an authorized dealer or qualified installation professional to
install/maintain the air conditioner.
Inappropriate installation may result in water leakage,electric shock
or fire.
Turn off the main power supply switch or breaker before
attempting any electrical work.
Make sure all power switches are off.Failure to do so may cause
electric shock.
Connect the connecting cable correctly.
If the connecting cable is connected in a wrong way, electric parts
may be damaged.
When moving the air conditioner for the installation into another
place, be very careful not to enter any gaseous matter other
than the specified refrigerant into the refrigeration cycle.
If air or any other has is mixed in refrigerant, the gas pressure in the
refrigeration cycle becomes abnormally high and it may resultingly
causes pipe burst and injuries on persons.
Do not modify this unit by removing any of the safety guards or
by by-passing any of the safety interlock switches.
Exposure of unit to water or other moisture before installation
may cause a short-circuit of electrical parts.
Do not store it in a wet basement or expose to rain or water.
After unpacking the unit, examine it carefully if there are
possible damage.
Do not install in a place that might increase the vibration of the
unit.
To avoid personal injury (with sharp edges), be careful when
handling parts.
Perform installation work properly according to the Installation
Manual.
Inappropriate installation may result in water leakage, electric shock
or fire.
When the air conditioner is installed in a small room, provide
appropriate measures to ensure that the concentration of
refrigerant leakage occur in the room does not exceed the
critical level.
Install the air conditioner securely in a location where the base
can sustain the weight adequately.
Perform the specified installation work to guard against an
earthquake.
If the air conditioner is not installed appropriately, accidents may
occur due to the falling unit.
If refrigerant gas has leaked during the installation work,
ventilate the room immediately.
If the leaked refrigerant gas comes in contact with fire, noxious gas
may generate.
After the installation work, confirm that refrigerant gas doer not
leak.
If refeigerant gas leaks into the room and flows near a fire source,
such as a cooking range, noxious gas might generate.
Electrical work must be performed by a qualified electrician in
accordance with the Installation Manual. Make sure the air
conditioner uses an exclusive power supply.
The appliance shall be installed in accordance with national wiring
regulations.
If the supply cord is damaged, it must be replaced by the
manufacture or its service agent or a similarly qualified person
in order to avoid a hazard.
An all-pole disconnection switch having a contact separation of at
least 3mm in all poles should be connected in fixed wiring.
The dimensions of the space necessary for correct installation
of the appliance including the minimum permissible distances
in order to avoid a hazard.

Specyfikacje produktu

Marka: Midea
Kategoria: klimatyzacja
Model: MVi-260WV2GN1(A)

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Midea MVi-260WV2GN1(A), zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje klimatyzacja Midea

Midea

Midea MIH15GHN18 Instrukcja

3 Stycznia 2025
Midea

Midea MFCA26VA-W Instrukcja

3 Stycznia 2025
Midea

Midea MIH28GHN18 Instrukcja

3 Stycznia 2025
Midea

Midea MULMI0250B Instrukcja

3 Stycznia 2025
Midea

Midea MIH63Q4CHN18 Instrukcja

3 Stycznia 2025
Midea

Midea MIH56GHN18 Instrukcja

3 Stycznia 2025
Midea

Midea MFCA70VA-N Instrukcja

3 Stycznia 2025
Midea

Midea MDV-V200WN1 Instrukcja

3 Stycznia 2025
Midea

Midea MFAB-35WC Instrukcja

3 Stycznia 2025
Midea

Midea MFAG36VA-N Instrukcja

3 Stycznia 2025

Instrukcje klimatyzacja

Najnowsze instrukcje dla klimatyzacja

ARCTIC WIND

ARCTIC WIND 3AW25000A Instrukcja

4 Stycznia 2025
ARCTIC WIND

ARCTIC WIND 4AW10000A Instrukcja

4 Stycznia 2025
ARCTIC WIND

ARCTIC WIND 3AW5000MSA Instrukcja

4 Stycznia 2025
ARCTIC WIND

ARCTIC WIND 3AW18000A Instrukcja

4 Stycznia 2025
ARCTIC WIND

ARCTIC WIND 3AWTW10002A Instrukcja

4 Stycznia 2025
ARCTIC WIND

ARCTIC WIND 3AWTW8000A Instrukcja

4 Stycznia 2025
ARCTIC WIND

ARCTIC WIND 3AWTW10000A Instrukcja

4 Stycznia 2025
ARCTIC WIND

ARCTIC WIND 3AWTW12000A Instrukcja

4 Stycznia 2025
Daitsu

Daitsu ACD36TKDBS Instrukcja

4 Stycznia 2025
GE

GE AKEQ14DCJ Instrukcja

4 Stycznia 2025