Instrukcja obsługi Middle Atlantic TS1640

Middle Atlantic Niesklasyfikowane TS1640

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Middle Atlantic TS1640 (5 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/5
• Simplifies millwork cabinet design
• Shortens installation & service time
• Rack can be mounted from 3” to 40” off floor
• Available with 26”, 20” and 16-1/2” frame depths
• Articulating cable carriers provide effective
cable management
• Frame heights from 10 spaces (17-1/2”) or
15 spaces (26-1/4") to 43 spaces (75-1/4")
• Service stand is quick and simple to install
• Ball bearings allow smooth roll out
• 650 lb. weight capacity with proper weight distribution
96-055M / rev 9 / 2-22-12 / AXS System for Millwork
The AXS system allows an entire bay of equipment to pull out for
easy installation or service. The telescoping service stand and tracks
disconnect for storage.
AXS System shown
installed in millwork
in service position
96-055M / rev 9 / 2-22-12
AXS System For Millwork & In-Wall
Patented EIA compliant 19” slide-out equipment rack for millwork installation shall be Middle
Atlantic Products model #__ (refer to chart). Rack shall have __ useable rackspaces, overall
height of __”, and a useable depth of __” (refer to chart). Rough-in millwork dimensions shall
have a minimum depth of __” (refer to chart) with a 1/2” setback, overall width of __” (refer to
specs) and a weight capacity of 650 lbs. with proper weight distribution. Rack shall be constructed
of the following materials: top, base, caster brackets, and horizontal braces shall be 13-gauge
steel with black powder coat finish, rack uprights shall be 11-gauge steel rackrail with tapped
10-32 mounting holes in universal EIA spacing. Rackrail shall be finished in black e-coat with
marked rackspaces, top and bottom trim panels shall be 11-gauge aluminum with a black brushed
and anodized finish. Cable carrier shall be constructed of the following materials: cable carrier
and lower hinges shall be constructed of 16-gauge steel, center hinge shall be constructed of
10-gauge steel and cable carrier shall be finished in a black powder coat. Rack top shall have
openings to accept up to 2 fans, model # AXS-FAN (one fan) or AXS-FAN-K (two fans). Service
tracks and stands shall be constructed of a 13-gauge steel frame with an aluminum extrusion.
Service tracks for AXS, SAX and AXS-xx-26 systems shall be model # TRACK50 with a 50” track
length and 48” rack frame extension depth. Service Tracks for AX-SX and SSAX systems shall be
model # TRACK25 with a 25” track length and 25” rack frame extension depth. Service stand
shall be model # TRACKL (for 2-1/4” - 3-1/4” mounting height off floor), TS310 (for
3”-11” mounting height off floor), TS1022 (for 10”-22” mounting height off floor)
and TS1640 (for 16”- 40” mounting height off floor). Rack shall be GREENGUARD Indoor Air
Quality Certified for Children and Schools. Rack shall be RoHS EU Directive 2002 / 95 / EC
compliant. Rack shall be manufactured by an ISO 9001 and ISO 14001 Registered Company.
Rack shall be warrantied to be free from defects in material or workmanship for a period
of 3 years.
OPTIONS
• Optional slim fan for AXS systems shall be model # AXS-FAN. Kit with 2 fans shall be model
# AXS-FAN-K
• Optional 20" and 26" full-depth front and rear mount AXS rackshelf shall be model # SH-5A
(fits AXS, AX-SX, SAX and SSAX), SH-5A-26 (fits AXS-XX-26)
• Optional cable management tray shall be model # AXS-WT25 (fits AX-SX, SSAX), AXS-WT50
(fits AXS, SAX)
• Brush gasket shall require 19-5/8” rough-in opening width and shall be model # BG17
• Gasket and guide to center rack and protect millwork requires 19-5/8” rough-in opening
width and shall be model # AXS-GGxx (xx=depth of rack; 16, 20, 26)
AX-SXR Rotating Slide-Out System
for millwork and in-wall
installations, please see A&E
specification # 96-01000
Also available
US Patent # 5, 443, 312 EIA/TIA Compliant
EXCEPTIONAL SUPPORT & PROTECTION™
C U S T O M I Z A B L E S P E C I F I C AT I O N C L I P S AV A I L A B L E AT M I D D L E A T L A N T I C C O M.
Features
C U S T O M I Z A B L E S P E C I F I C AT I O N C L I P S AV A I L A B L E AT M I D D L E A T L A N T I C C O M.
US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com
Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca
Architects’ and Engineers’ Specifications
SIDE VIEW
FRONT VIEW
NOTE: Service stand TS1022 and TS1640 in
outer-most position will extend .517” beyond
track, TS310 will extend 4.743” beyond track,
TRACKL does not extend beyond track.
19-1/4 [489] min. finished opening width without gasket
TOP VIEW
A
B
.518 [13]
TS1022/
TS1640 and
4.743 [120]
TS310 .50 [13] min.
2.50 [63] max.
set back
Track 25 = 25.00 [635]
(used with AX-SX / SSAX)
Track 50 = 50.00 [1270]
(used with AXS / SAX /
AXS-xx-26)
AXS-xx-26 = 28.00 [711]
AX-SX = 17.00 [432]
AXS = 28.00 [711]
SSAX = 17.00 [432]
SAX = 28.00 [711]
AXS-xx-26 = 28.50 [724] min.
AX-SX = 22.50 [572] min.
AXS = 22.50 [572] min.
SSAX = 19.00 [483] min.
SAX = 19.00 [483] min.
includes 1/2 set back
see
service
stands
chart
MILLWORK SPECIFICATIONS
* When using optional gasket and guide kit, 3/8” must be added
to millwork opening height.
** AX-SX & SSAX only
SAX-XX, SSAX-XX
(frame depth = 16.5”) AXS-XX, AX-SXR-XX, AX-SX-XX
(frame depth = 20”) AXS-XX-26
(frame depth = 26”)
Specifications for AXS System
All dimensions in inches [Bracketed dimensions are in millimeters]
19-5/8 [498] when using optional gasket
A A B
# OF USEABLE USEABLE RACK MILLWORK OPENING
RACKSPACES HEIGHT (in.) HEIGHT (in.)*
**10 17-1/2 [444] 22-3/16 [568]
**11 19-1/4 [489] 23-15/16 [608]
**12 21 [533] 25-11/16 [653]
**13 22-3/4 [578] 27-7/16 [697]
**14 24-1/2 [622] 29-3/16 [741]
15 26-1/4 [667] 30-15/16 [786]
16 28 [711] 32-11/16 [837]
17 29-3/4 [756] 34-7/16 [875]
18 31-1/2 [800] 36-3/16 [919]
19 33-1/4 [845] 37-15/16 [964]
20 35 [889] 39-11/16 [1011]
21 36-3/4 [934] 41-7/16 [1053]
22 38-1/2 [978] 43-3/16 [1097]
23 40-1/4 [1022] 44-15/16 [1142]
24 42 [1067] 46-11/16 [1186]
25 43-3/4 [1112] 48-7/16 [1231]
26 45-1/2 [1156] 50-3/16 [1275]
27 47-1/4 [1200] 51-15/16 [1319]
28 49 [1244] 53-11/16 [1364]
29 50-3/4 [1289] 55-7/16 [1408]
30 52-1/2 [1334] 57-3/16 [1453]
31 54-1/4 [1378] 58-15/16 [1497]
32 56 [1423] 60-11/16 [1545]
33 57-3/4 [1467] 62-7/16 [1586]
34 59-1/2 [1512] 64-3/16 [1631]
35 61-1/4 [1556] 65-15/16 [1675]
36 63 [1600] 67-11/16 [1720]
37 64-3/4 [1645] 69-7/16 [1764]
38 66-1/2 [1689] 71-3/16 [1809]
39 68-1/4 [1734] 72-15/16 [1853]
40 70 [1778] 74-11/16 [1898]
41 71-3/4 [1823] 76-7/16 [1942]
42 73-1/2 [1867] 78-3/16 [1986]
43 75-1/4 [1912] 79-15/16 [2031]
Middle Atlantic Products, Inc.
Middle Atlantic Products
®
16.50 [419.1] 16.50 [419.1]
11.5 [292.1] 11.5 [292.1]
16.50 [419.1]
11.5 [292.1]
14.43
[366.5] 18.00
[457.2]
24.00
[609.6]17.5
[444.5]
23.5
[596.9]
9.5
[241.3]
9.5
[241.3]
21.05
[534.6]
18.75
[476.3]
4X Ø.28 [7.1] X
1.13 [28.6] OB
4X Ø.28
[7.1] X
1.13 [28.6]
OB
13.93
[353.8]
17.48
[443.9]
15.18
[385.6]
6X Ø.28
[7.1]
6X Ø.28
[7.1]
6X Ø.28
[7.1]
.75
[19.1] .75 [19.1]
27.05
[687]
24.75
[628.7]
9.75
[247.7]
12.75
[323.9]
4X Ø.28
[7.1] X 1.13
[28.6]OB
7.97 [202.3]
.75 [19.1]
0 [0]
0 [0] 0 [0]
9.5
[241.3]
9.59 [243.7]
19.19 [487.4] 9.59 [243.7]
19.19 [487.4]
9.59 [243.7]
19.19 [487.4]
C
LC
L
C
L
BASE DIMENSIONS
US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com
Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca
19.13 [486] AXS frame
useable
rackspace X
1.75
[44]
NOTE:
To calculate rail to front edge
clearance, use the numbers in
“Millwork Specs” in conjunction
with the clearance for any door
or face you may provide for your
millwork installation.
1.86 [47]
19.13 [486] AXS frame
FRONT VIEW
(AXS inner frame)
SETBACK
Service Stands
Part # Height Range Off of the Floor
TRACKL 2-1/4 [57] to 3-1/4 [82]
TS310 3 [76] to 11 [279]
TS1022 10 [254] to 22 [559]
TS1640 16 [406] to 40 [1016]
Specifications for AXS System
Millwork Specifications
Service Tracks: available in 2 lengths
Part # Use with Track Length
TRACK50 AXS, SAX, AXS-xx-26 50 [1270]
TRACK25 AX-SX, SSAX 25 [635]
US: New Jersey • California • Illinois • Voice: 973-839-1011 Fax: 973-839-1976 • middleatlantic.com
Canada: Ontario • British Columbia • Voice: 613-836-2501 Fax: 613-836-2690 • middleatlantic.ca
All dimensions in inches [Bracketed dimensions are in millimeters]
* When used with gasket and guide kit millwork opening width must be 19-5/8 [498] min.
2.55
[65]
Part # Extension
Length Frame
Depth Millwork
Opening Depth Millwork
Opening Width Millwork Opening Height
AXS-xx-26* Replace ‘xx’ with the # of useable
spaces (15 to 43 spaces) 48 [1219] 26 [660] 28-1/2 [724] 19-1/4 [489] min. * number of useable rackspaces
+ 4.688 [119]
AXS-xx* Replace ‘xx’ with the # of useable
spaces (15 to 43 spaces) 48 [1219] 20 [508] 22-1/2 [572] 19-1/4 [489] min. * number of useable rackspaces
+ 4.688 [119]
AX-SX-xx* Replace ‘xx’ with the # of useable
spaces (10 to 43 spaces) 25 [635] 20 [508] 22-1/2 [572] 19-1/4 [489] min. * number of useable rackspaces
+ 4.688 [119]
SAX-xx* Replace ‘xx’ with the # of useable
spaces (15 to 43 spaces) 48 [1219] 16-1/2 [419] 19 [483] 19-1/4 [489] min. * number of useable rackspaces
+ 4.688 [119]
SSAX-xx* Replace ‘xx’ with the # of useable
spaces (10 to 43 spaces) 25 [635] 16-1/2 [419] 19 [483] 19-1/4 [489] min. * number of useable rackspaces
+ 4.688 [119]
Middle Atlantic Products, Inc.
Middle Atlantic Products
®

Specyfikacje produktu

Marka: Middle Atlantic
Kategoria: Niesklasyfikowane
Model: TS1640

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Middle Atlantic TS1640, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Middle Atlantic

Middle Atlantic

Middle Atlantic TS1640 Instrukcja

25 Grudnia 2024
Middle Atlantic

Middle Atlantic U3V Instrukcja

25 Grudnia 2024
Middle Atlantic

Middle Atlantic TS310 Instrukcja

25 Grudnia 2024
Middle Atlantic

Middle Atlantic U1V-4 Instrukcja

25 Grudnia 2024
Middle Atlantic

Middle Atlantic MW-ST Instrukcja

25 Grudnia 2024
Middle Atlantic

Middle Atlantic BGR-CC-27LT Instrukcja

25 Grudnia 2024
Middle Atlantic

Middle Atlantic IFTA-6 Instrukcja

25 Grudnia 2024
Middle Atlantic

Middle Atlantic PFD-24 Instrukcja

25 Grudnia 2024
Middle Atlantic

Middle Atlantic PFD-44 Instrukcja

25 Grudnia 2024
Middle Atlantic

Middle Atlantic CBS-5 Instrukcja

25 Grudnia 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Conair

Conair DF22DCM Instrukcja

25 Grudnia 2024
Global Water

Global Water WA600 Instrukcja

25 Grudnia 2024
Conair

Conair CB06 Instrukcja

25 Grudnia 2024
Focal

Focal Lensys Professional Instrukcja

25 Grudnia 2024
Supermicro

Supermicro A2SDi-8C-HLN4F Instrukcja

25 Grudnia 2024
Supermicro

Supermicro A2SDi-4C-HLN4F Instrukcja

25 Grudnia 2024
Supermicro

Supermicro A2SAN-L Instrukcja

25 Grudnia 2024
Luxul

Luxul Epic 3 WS-260 Instrukcja

25 Grudnia 2024
Bestway

Bestway 58775 Instrukcja

25 Grudnia 2024
Panasonic

Panasonic AK-HCU250PSJ Instrukcja

25 Grudnia 2024