Instrukcja obsługi Middle Atlantic Products SS

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Middle Atlantic Products SS (4 stron) w kategorii Niet gecategoriseerd. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
I-2000 Rev K
THANK YOU
Thank you for purchasing the SS/SSL Sliding Shelf. Please read these instructions
thoroughly before installing this product.
PRODUCT FEATURES
- Shelf slides out for easy access to the rear of equipment or to create a writing surface
- Telescopic rear support allows both shelves to be mounted to any rack
- Large shelf area can accommodate a wide variety of equipment
Page 2
7/8” HOOK AND LOOP FASTENERS
- To extend the shelf, grab the front edge of the shelf and
gently pull forward until the rollers seat in locking
dimples.
- To extend the shelf, pull forward by grasping the flange
on the front of the shelf. The shelf will lock when
fully extended.
SLIDING SHELF (SS SHOWN)
8-32 x 1/2 PANHEAD SCREW
7/8"
SSL
SS
#10X5/8
WOOD SCREW
8-32
STAR NUT
QTY PART
QTY PART
SSL
SS
CAUTION: DO NOT PULL OUT THE SHELF TO FAR,
IT MAY BECOME DETACHED.
QTY
PSSRB1
PART
1 A
QTY PART
2 B
QTY PART
2 C
QTY PART
2 D
2 E
2 F
PARTS LIST
OPERATION
Page 3
- Place soft material dot on the component’s foot. If there is no feet on the component, place as close to
the corner as possible to ensure stability. (FIGURE D)
- Extend the rear hanging brackets until they meet
the sides of the rack. (FIGURE A)
- Attach PSSRB1s to the shelf’s preinstalled
rear support bracket with provided hardware.
(FIGURE B)
- Ensure all brackets are aligned, tighten screws,
nuts and preinstalled wing-nuts. (FIGURE B)
NOTE: Leave no gap during installation of
part B. (FIGURE C)
- Level the shelf from front to back Secure the
brackets to the sides with supplied wood screws.
Tighten the wing-nuts on the bracket. (FIGURE A)
- Mate coarse material dot on the soft material dot. (FIGURE E)
FIGURE A (Rear of Shelf)
FIGURE B (Rear of Shelf)
INCORRECT
(Weaker) CORRECT
(Stronger)
WOOD RACK INSTALLATION (Without Rear Rail)
INSTALLATION WITH REAR RAIL
FIGURE E
FIGURE D
HOOK AND LOOP FASTENER INSTALLATION
INSTALLATION
Rear
Support
Bracket
Rear
Support
Bracket
E
F
C
B
DD
FIGURE C
Note
Gap

Specyfikacje produktu

Marka: Middle Atlantic Products
Kategoria: Niet gecategoriseerd
Model: SS

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Middle Atlantic Products SS, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niet gecategoriseerd Middle Atlantic Products

Instrukcje Niet gecategoriseerd

Najnowsze instrukcje dla Niet gecategoriseerd

IFM

IFM OY005S Instrukcja

13 Października 2024
Livarno

Livarno IAN 283481 Instrukcja

13 Października 2024
Sony

Sony MCX-500 Instrukcja

13 Października 2024
Vivax

Vivax ACP-12DT35AERI Instrukcja

13 Października 2024
Samsung

Samsung HG32AJ570NK Instrukcja

13 Października 2024
Jane

Jane Cushion Instrukcja

13 Października 2024
Roland

Roland RD-300GX Instrukcja

13 Października 2024
MPM

MPM MCZ-101 Instrukcja

13 Października 2024