Instrukcja obsługi Microchip USB2504

Microchip Niesklasyfikowane USB2504

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Microchip USB2504 (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/3
SMSC EVB-USB2504 Revision A1 (06-26-07)
Copyright © 2007 SMSC or its subsidiaries. All rights reserved.
The information contained herein is proprietary to SMSC and shall be used solely in accordance with the agreement pursuant to which
it is provided. Although the information is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the
right to make changes to this document and to specifications and product descriptions at any time without notice. Neither the provision
of this information nor the sale of the described semiconductor devices conveys any licenses under any patent rights or other intellectual
property rights of SMSC or others unless specifically specified otherwise. The product may contain design defects or errors known as
anomalies, including but not necessarily limited to any which may be identified in this document, which may cause the product to deviate
from published specifications. SMSC products are not designed, intended, authorized or warranted for use in any life support or other
application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without
prior written approval of an officer of SMSC will be fully at the risk of the customer. SMSC is a registered trademark of Standard
Microsystems Corporation ("SMSC").
SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT AND THE LIKE,
AND ANY AND ALL WARRANTIES ARISING FROM ANY COURSE OF DEALING OR USAGE OF TRADE. IN NO EVENT SHALL SMSC BE
LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES; OR FOR LOST DATA,
PROFITS, SAVINGS OR REV-ENUES OF ANY KIND; REGARDLESS OF THE FORM OF ACTION, WHETHER BASED ON CONTRACT; TORT;
NEGLIGENCE OF SMSC OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR OTHERWISE; WHETHER OR NOT ANY REMEDY
OF BUYER IS HELD TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
EVB-USB2504 Evaluation Board
EVB-USB2504 Evaluation Board
Revision A1 (06-26-07) SMSC EVB-USB2504
2
1 Overview
1.1 Features
Operates from a single voltage (+5.0V, regulated) wall wart external power supply
Onboard +3.3V Regulator
Self-powered operation
Serial EEPROM for configuration information mounted in a socket
Full set of green and amber LED indicators
Individual port over-current sense and power switching
Multi-TT enabled
High-speed/Full-speed capable
100mS down stream port power on time
1mA VBUS current consumption
1.2 General Description
The primary purpose of this board is to demonstrate a full-featured HUB configuration for the SMSC
USB2504 4-port HUB. This does not represent a minimal cost design. The EEPROM allows for
modifications to the the base configuration - for example one more down stream ports can be disabled
or configured as non-removable for compound device application. The DID, PID or DID information
can be changed for HUB.
A windows utility E2PROMAPP is included in the package to allow modifications of the base
configuration EEPROM. The bin file evb-usb2504_02.bin contains the base configuration. A screen
shot from the application is shown in figure 1. After changes has been selected click the button “Create
EEPROM File”. Note that if the output file name is the same as the input file name it will be overwritten
with the new values. The output file name can be changed before creating a new bin file. The bin file
format is compatible with most EEPROM programmers.
EVB-USB2504 Evaluation Board
SMSC EVB-USB2504 Revision A1 (06-26-07)
3
Figure 1.1 E2PROMAPP EEPROM Configuration Utility.

Specyfikacje produktu

Marka: Microchip
Kategoria: Niesklasyfikowane
Model: USB2504

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Microchip USB2504, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Microchip

Microchip

Microchip ATECC608B Instrukcja

7 Października 2024
Microchip

Microchip HV860 Instrukcja

7 Października 2024
Microchip

Microchip EVB-LAN9255 Instrukcja

7 Października 2024
Microchip

Microchip LX4580 Instrukcja

7 Października 2024
Microchip

Microchip LX7720 Instrukcja

7 Października 2024
Microchip

Microchip AT32UC3C0128C Instrukcja

4 Października 2024
Microchip

Microchip AT32UC3A3256 Instrukcja

4 Października 2024
Microchip

Microchip AT32UC3A364 Instrukcja

4 Października 2024
Microchip

Microchip AT32UC3B0256 Instrukcja

4 Października 2024
Microchip

Microchip AT32UC3A0512 Instrukcja

4 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024