Instrukcja obsługi Microchip MCP1801

Microchip Niesklasyfikowane MCP1801

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Microchip MCP1801 (28 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/28

 2010 Microchip Technology Inc. DS22051D-page 1

MCP1801

Features:

• 150 mA Maximum Output Current

• Low Dropout Voltage, 200 mV typical @ 100 mA

• 25 µA Typical Quiescent Current

• 0.01 µA Typical Shutdown Current

• Input Operating Voltage Range: 2.0V to 10.0V

• Standard Output Voltage Options:

- 0.9V, 1.2V, 1.8V, 2.5V, 3.0V, 3.3V, 5.0V, 6.0V

• Output Voltage Accuracy:

- ±2% (VR > 1.5V), ±30 mV (VR  1.5V)

• Stable with Ceramic Output Capacitors

• Current Limit Protection

• Shutdown Pin

• High PSRR: 70 dB typical @ 10 kHz

Applications:

• Battery-powered Devices

• Battery-powered Alarm Circuits

• Smoke Detectors

• CO2 Detectors

• Pagers and Cellular Phones

• Wireless Communications Equipment

• Smart Battery Packs

• Low Quiescent Current Voltage Reference

• PDAs

• Digital Cameras

• Microcontroller Power

• Solar-Powered Instruments

• Consumer Products

• Battery Powered Data Loggers

Related Literature:

• AN765, “Using Microchip’s Micropower LDOs”,

DS00765, Microchip Technology Inc., 2002

• AN766, “Pin-Compatible CMOS Upgrades to

BiPolar LDOs”, DS00766,

Microchip Technology Inc., 2002

• AN792, “A Method to Determine How Much

Power a SOT23 Can Dissipate in an Application”,

DS00792, Microchip Technology Inc., 2001

Description:

The MCP1801 is a family of CMOS low dropout (LDO)

voltage regulators that can deliver up to 150 mA of

current while consuming only 25 µA of quiescent

current (typical). The input operating range is specified

from 2.0V to 10.0V, making it an ideal choice for two to

six primary cell battery-powered applications, 9V

alkaline and one or two cell Li-Ion-powered

applications.

The MCP1801 is capable of delivering 100 mA with

only 200 mV (typical) of input to output voltage

differential (VOUT = 3.3V). The output voltage tolerance

of the MCP1801 at +25°C is typically ±0.4% with a

maximum of ±2%. Line regulation is ±0.01% typical at

+25°C.

The LDO output is stable with a minimum of 1 µF of

output capacitance. Ceramic, tantalum, or aluminum

electrolytic capacitors can all be used for input and

output. Overcurrent limit with current foldback provides

short-circuit protection. A shutdown (SHDN) function

allows the output to be enabled or disabled. When

disabled, the MCP1801 draws only 0.01 µA of current

(typical).

The MCP1801 is available in a SOT-23-5 package.

Package Types

SOT-23-5

123

5 4

VOUT NC

VIN SHDNVSS

150 mA, High PSRR, Low Quiescent Current LDO

MCP1801

DS22051D-page 2  2010 Microchip Technology Inc.

Functional Block Diagram

Typical Application Circuit

MCP1801

VIN VOUT

GND

+VIN

Error Amplifier

Voltage

Reference Current Limiter

Shutdown

Control

SHDN

+VIN

MCP1801

VIN

CIN

1 µF

COUT

1 µF Ceramic

Battery

VOUT

GND

SHDN

Ceramic

OUT

3.3V @ 40 mA

 2010 Microchip Technology Inc. DS22051D-page 3

MCP1801

1.0 ELECTRICAL

CHARACTERISTICS

Absolute Maximum Ratings †

Input Voltage ................................................................. +12V

Output Current (Continuous) ..................... PD/(VIN-VOUT)mA

Output Current (Peak) ............................................... 500 mA

Output Voltage ............................... (V

SS-0.3V) to (VIN+0.3V)

SHDN Voltage..................................(V

SS-0.3V) to (VIN+0.3V)

Continuous Power Dissipation:

SOT-23-5 .............................................................. 250 mW

† Notice: Stresses above those listed under “Maximum

Ratings” may cause permanent damage to the device.

This is a stress rating only and functional operation of

the device at those or any other conditions above those

indicated in the operational listings of this specification

is not implied. Exposure to maximum rating conditions

for extended periods may affect device reliability.

ELECTRICAL CHARACTERISTICS

Electrical Specifications: Unless otherwise specified, all limits are established for V IN = VR + 1.0V, Note 1, COUT = 1 µF (X7R),

CIN = 1 µF (X7R), VSHDN = VIN, TA = +25°C.

Parameters Sym Min Typ Max Units Conditions

Input / Output Characteristics

Input Operating Voltage VIN 2.0 — 10.0 V Note 1

Input Quiescent Current Iq— 25 50 µA IL = 0 mA

Shutdown Current ISHDN — 0.01 0.10 µA SHDN = 0V

Maximum Output Current IOUT_mA 150 — — mA

Current Limiter ILIMIT — 300 — mA if VR  1.75V, then VIN = VR + 2.0V

Output Short Circuit Current IOUT_SC — 50 — mA if VR  1.75V, then VIN = VR + 2.0V

Output Voltage Regulation VOUT VR-2.0% VRVR+2.0% V VR  1.45V, IOUT = 30 mA, Note 2

VR-30 mV VRVR+30 mV VR  1.45V, IOUT = 30 mA

VOUT Temperature Coeffi-

cient

TCVOUT — 100 — ppm/°C IOUT = 30 mA, -40°C TA +85°C,

Note 3

Line Regulation VOUT/

(VOUTX VIN)

-0.2 ±0.01 +0.2 %/V (V R + 1V) VIN 10V, Note 1

VR  1.75V, IOUT = 30 mA

VR  1.75V, IOUT = 10 mA

Load Regulation VOUT/VOUT — 15 50 mV IL = 1.0 mA to 100 mA, Note 4

Dropout Voltage, Note 5 VDROPOUT — 60 90 mV IL = 30 mA, 3.1V VR  6.0V

— 200 250 IL = 100 mA, 3.1V VR  6.0V

— 80 120 IL = 30 mA, 2.0V VR  3.1V

— 240 350 IL = 100 mA, 2.0V VR < 3.1V

— 2.07 - VR2.10 - VRV IL = 30 mA, VR  2.0V

— 2.23 - VR2.33 - VRIL = 100 mA, VR < 2.0V

Power Supply Ripple

Rejection Ratio

PSRR — 70 — dB f = 10 kHz, IL = 50 mA,

VINAC = 1V pk-pk, CIN = 0 µF,

if VR  1.5V, then VIN = 2.5V

Output Noise eN— 0.6 — µV/Hz IOUT =100 mA, f=1 kHz,

COUT=1 µF (X7R Ceramic),

VOUT=3.3V

Note 1: The minimum VIN must meet two conditions: VIN2.0V and VIN (VR + 1.0V).

2: VR is the nominal regulator output voltage. For example: VR = 1.8V, 2.5V, 3.0V, 3.3V, or 5.0V.

The input voltage VIN = V R + 1.0V or ViIN = 2.0V (whichever is greater); IOUT = 100 µA.

3: TCVOUT = (VOUT-HIGH - VOUT-LOW

) *10 6

/ (V R * Temperature), VOUT-HIGH

= highest voltage measured over the

temperature range. VOUT-LOW = lowest voltage measured over the temperature range.

4: Load regulation is measured at a constant junction temperature using low duty cycle pulse testing. Changes in output

voltage due to heating effects are determined using thermal regulation specification TCV OUT

5: Dropout voltage is defined as the input to output differential at which the output voltage drops 2% below its measured

value with an applied input voltage of VR + 1.0V or 2.0V, whichever is greater.

Specyfikacje produktu

Marka:	Microchip
Kategoria:	Niesklasyfikowane
Model:	MCP1801

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Microchip MCP1801, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane Microchip

Microchip ATECC608B Instrukcja

7 Października 2024

Microchip HV860 Instrukcja

7 Października 2024

Microchip EVB-LAN9255 Instrukcja

7 Października 2024

Microchip LX4580 Instrukcja

7 Października 2024

Microchip LX7720 Instrukcja

7 Października 2024

Microchip AT32UC3C0128C Instrukcja

4 Października 2024

Microchip AT32UC3A3256 Instrukcja

4 Października 2024

Microchip AT32UC3A364 Instrukcja

4 Października 2024

Microchip AT32UC3B0256 Instrukcja

4 Października 2024

Microchip AT32UC3A0512 Instrukcja

4 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024

Stihl HT 70 Instrukcja

15 Października 2024

Ernesto H14270 Instrukcja

15 Października 2024

Uniden BT MIC KIT Instrukcja

15 Października 2024

Vaude Omnis Bike 26 Instrukcja

15 Października 2024

ART ProChannel II Instrukcja

15 Października 2024

Aukey DR02J Instrukcja

15 Października 2024

Master Lock 653EURD Instrukcja

15 Października 2024

Roland FR-18 Diatonic Instrukcja

15 Października 2024