Instrukcja obsługi Microchip EVB-USB3740

Microchip nieskategoryzowany EVB-USB3740

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Microchip EVB-USB3740 (6 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
SMSC USB3740 EVB USER MANUAL Revision 1.1 (12-07-12)
Copyright © 2012 SMSC or its subsidiaries. All rights reserved.
Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information
sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed
for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office
to obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor
devices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms
and conditions of the most recently dated version of SMSC's standard Terms of Sale Agreement dated before the date of your order (the "Terms of Sale Agreement").
The product may contain design defects or errors known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly
sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product
failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further
testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be
obtained by visiting SMSC’s website at http://www.smsc.com. SMSC is a registered trademark of Standard Microsystems Corporation (“SMSC”). Product names and
company names are the trademarks of their respective holders.
The Microchip name and logo, and the Microchip logo are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.
SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT AND THE LIKE, AND ANY AND ALL WARRANTIES
ARISING FROM ANY COURSE OF DEALING OR USAGE OF TRADE. IN NO EVENT SHALL SMSC BE LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT,
SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES; OR FOR LOST DATA, PROFITS, SAVINGS OR REVENUES OF ANY KIND; REGARDLESS OF THE
FORM OF ACTION, WHETHER BASED ON CONTRACT; TORT; NEGLIGENCE OF SMSC OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR
OTHERWISE; WHETHER OR NOT ANY REMEDY OF BUYER IS HELD TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
USB3740 Evaluation Board User Manual
USB3740 Evaluation Board User Manual
SMSC USB3740 EVB 2 Revision 1.1 (12-07-12)
USER MANUAL
1 Introduction
The USB3740 EVB demonstrates the capabilities of the USB3740. The board consists of the upstream
and downstream ports, manual switches to control the OE_N and S pins, and a second USB3740 that
can be evaluated with SMA connectors instead of USB (SMA connectors not installed).
2 Hardware
2.1 USB Ports
The USB ports are mounted on the edges of the USB3740 EVB. The downstream ports use the
standard USB Type A receptacle. The label for the port is located next to the receptacle. The upstream
port can be a standard USB Type B, mini-B or micro-B receptacle, the default connector is a USB mini-
B connector.
2.2 Test Points and Resistors
The USB3740 EVB provides access to the OE_N, S, VDD and GND pins. TP2 connects to GND, TP1
connects to the VDD pin. R1 (On the back of the PCB) connects the upstream VBUS to the VDD of
the USB3740. R2 and R3 connect the upstream VBUS to the VBUS pins of the dowstream ports. SW1
and SW2 control the operation of the switch. SW1 controls the Output Enable (OE_N) pin. To enable
the switch, OE_N should be set to 0. SW2 selects which downstream port is connected to the upstream
port.
Figure 2.1 Upstream and Downstream Ports
Upstream
Downstream1 Downstream2
USB3740 Evaluation Board User Manual
SMSC USB3740 EVB 3 Revision 1.1 (12-07-12)
USER MANUAL
2.3 SMA Evaluation (Not Installed)
The USB3740 EVB also contains a section to evaluate the USB3740 without the standard USB
connectors. Because the switch can be used in many different applications, a second USB3740 is
placed on the board with the pins routed out to right angle SMA connectors. The connectors are not
populated by default. R5 is used to supply VDD to the second USB3740.
Figure 2.2 Test points, Resistors and Switches
Figure 2.3 USB3740 EVB with the SMAs populated
TP2
TP2 SW1 SW2
R3
R2
R5

Specyfikacje produktu

Marka: Microchip
Kategoria: nieskategoryzowany
Model: EVB-USB3740

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Microchip EVB-USB3740, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany Microchip

Microchip

Microchip EMC1824 Instrukcja

5 Lipca 2024
Microchip

Microchip EVB-USB3740 Instrukcja

5 Lipca 2024
Microchip

Microchip EVB-USB3503 Instrukcja

5 Lipca 2024
Microchip

Microchip EVB-LAN7430 Instrukcja

5 Lipca 2024
Microchip

Microchip ATSAMHA1G14A-B Instrukcja

5 Lipca 2024
Microchip

Microchip MCP1631 Instrukcja

5 Lipca 2024
Microchip

Microchip ATSAM4LS4B Instrukcja

5 Lipca 2024
Microchip

Microchip EVB-USB2507 Instrukcja

5 Lipca 2024
Microchip

Microchip EVB-USB2502 Instrukcja

5 Lipca 2024
Microchip

Microchip PAC1710 Instrukcja

5 Lipca 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Meec Tools

Meec Tools 010-084 Instrukcja

6 Października 2024
Outwell

Outwell Scenic Road 250 Instrukcja

5 Października 2024
Impact

Impact Qualite QL-3560-LED Instrukcja

4 Października 2024
Impact

Impact QuikBalance Instrukcja

4 Października 2024
Impact

Impact CA-112 Instrukcja

4 Października 2024
Impact

Impact Forever Ready Cool FRC-24-LED Instrukcja

4 Października 2024
Impact

Impact LS-BHA Instrukcja

4 Października 2024
Impact

Impact LKB-5C Instrukcja

4 Października 2024
Impact

Impact Varipole Drop Ceiling Adapter Instrukcja

4 Października 2024
Impact

Impact RST-001 Instrukcja

4 Października 2024