Instrukcja obsługi Microchip ATSAMDA1J14B

Microchip Niesklasyfikowane ATSAMDA1J14B

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Microchip ATSAMDA1J14B (102 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/102
Atmel QTouch Library
QTouch Library Peripheral Touch Controller
USER GUIDE
Description
Atmel® QTouch® Peripheral Touch Controller (PTC) offers built-in hardware
for capacitive touch measurement on sensors that function as buttons,
sliders, and wheels. The PTC supports both mutual and self-capacitance
measurement without the need for any external component. It offers superb
sensitivity and noise tolerance, as well as self-calibration, and minimizes the
sensitivity tuning effort by the user.
The PTC is intended for autonomously performing capacitive touch sensor
measurements. The external capacitive touch sensor is typically formed on a
PCB, and the sensor electrodes are connected to the analog charge
integrator of the PTC using the device I/O pins. The PTC supports mutual
capacitance sensors organized as capacitive touch matrices in different X-Y
configurations, including Indium Tin Oxide (ITO) sensor grids. In mutual
capacitance mode, the PTC requires one pin per X-line (drive line) and one
pin per Y-line (sense line). In self-capacitance mode, the PTC requires only
one pin with a Y-line driver for each self-capacitance sensor.
Features
•Implements low-power, high-sensitivity, environmentally robust
capacitive touch buttons, sliders, and wheels
•Supports mutual capacitance and self-capacitance sensing
•Up to 32 buttons in self-capacitance mode
•Up to 256 buttons in mutual capacitance mode
•Supports lumped mode configuration
•One pin per electrode - no external components
•Load compensating charge sensing
•Parasitic capacitance compensation for mutual capacitance mode
•Adjustable gain for superior sensitivity
•Zero drift over the temperature and VDD range
•No need for temperature or VDD compensation
•Hardware noise filtering and noise signal de-synchronization for high
conducted immunity
•Atmel provided QTouch Library firmware and QTouch Composer tool
Atmel-42195M-Peripheral-Touch-Controller_User Guide-07/2016
Product Support
For assistance related to QTouch capacitive touch sensing software libraries and related issues, contact
your local Atmel sales representative or log on to myAtmel Design Support portal to submit a support
request or access a comprehensive knowledge base.
If you do not have a myAtmel account, please visit http://www.atmel.com/design-support/ to create a new
account by clicking on in the myAtmel menu at the top of the page.Create Account
When logged in, you will be able to access the knowledge base, submit new support cases from the
myAtmel page or review status of your ongoing cases.
Atmel QTouch Library Peripheral Touch Controller [USER GUIDE]
Atmel-42195M-Peripheral-Touch-Controller_User Guide-07/2016
2
Table of Contents
Description.......................................................................................................................1
Features.......................................................................................................................... 1
1. Development Tools ................................................................................................... 5
2. Device Variants Supported........................................................................................ 6
3. Capacitive Touch Technology.................................................................................... 8
3.1. Capacitive Touch Sensors............................................................................................................8
3.2. Capacitance Measurement Methods............................................................................................8
3.3. Self-capacitance Measurement Method.......................................................................................8
3.4. Mutual Capacitance Measurement Method..................................................................................9
3.5. Capacitive Touch Lumped Sensors..............................................................................................9
3.6. Capacitive Touch Low Power Sensor......................................................................................... 11
3.7. PTC and its Benefits...................................................................................................................13
3.8. PTC Block Diagram for Self-capacitance and Mutual Capacitance Method.............................. 13
3.9. Design Approach with PTC........................................................................................................ 15
3.10. Capacitive Touch Development Cycle........................................................................................16
4. Touch Sensor Debug and Status Information.......................................................... 17
4.1. Signal..........................................................................................................................................17
4.2. Reference...................................................................................................................................17
4.3. Delta........................................................................................................................................... 18
4.4. Touch Status & Slider/Wheel Position........................................................................................ 19
5. QTouch Library........................................................................................................ 20
5.1. Overview.....................................................................................................................................20
5.2. Library Parameters.....................................................................................................................21
5.3. Moisture Tolerance..................................................................................................................... 42
5.4. Reading Sensor States...............................................................................................................44
5.5. Application Flow......................................................................................................................... 44
5.6. API Sequence.............................................................................................................................46
5.7. State Machine.............................................................................................................................47
5.8. Operation Modes........................................................................................................................50
5.9. Touch Library API Error.............................................................................................................. 52
6. Tuning for Noise Performance.................................................................................54
6.1. Noise Sources............................................................................................................................ 54
6.2. Noise Counter Measures............................................................................................................54
7. Application Design................................................................................................... 60
7.1. Touch Library and Associated Files............................................................................................60
7.2. Code and Data Memory Considerations.................................................................................... 60
8. Example Applications.............................................................................................. 63

Specyfikacje produktu

Marka: Microchip
Kategoria: Niesklasyfikowane
Model: ATSAMDA1J14B

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Microchip ATSAMDA1J14B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Microchip

Microchip

Microchip ATECC608B Instrukcja

7 Października 2024
Microchip

Microchip HV860 Instrukcja

7 Października 2024
Microchip

Microchip EVB-LAN9255 Instrukcja

7 Października 2024
Microchip

Microchip LX4580 Instrukcja

7 Października 2024
Microchip

Microchip LX7720 Instrukcja

7 Października 2024
Microchip

Microchip AT32UC3C0128C Instrukcja

4 Października 2024
Microchip

Microchip AT32UC3A3256 Instrukcja

4 Października 2024
Microchip

Microchip AT32UC3A364 Instrukcja

4 Października 2024
Microchip

Microchip AT32UC3B0256 Instrukcja

4 Października 2024
Microchip

Microchip AT32UC3A0512 Instrukcja

4 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024