Instrukcja obsługi Microchip ATSAMC20N18A

Microchip Niesklasyfikowane ATSAMC20N18A

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Microchip ATSAMC20N18A (117 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/117

Atmel QTouch

SAM C20 Safety Library

USER GUIDE

Introduction

Atmel® QTouch® Peripheral Touch Controller (PTC) offers built-in hardware

for buttons, sliders, and wheels. PTC supports both mutual and self

capacitance measurement without the need for any external component. It

offers superb sensitivity and noise tolerance, as well as self-calibration and

minimizes the sensitivity tuning effort by the user.

The PTC is intended for acquiring capacitive touch sensor signals. The

external capacitive touch sensor is typically formed on a PCB, and the

sensor electrodes are connected to the analog charge integrator of the PTC

using the device I/Opins. The PTC supports mutual capacitance sensors

organized as capacitive touch matrices in different X-Y configurations,

including Indium Tin Oxide (ITO) sensor grids. In mutual capacitance mode,

the PTC requires one pin per X line(drive line) and one pin per Y line (sense

line). In self capacitance mode, the PTC requires only one pin with a Y-line

driver for each self-capacitance sensor.

The PTC supports two sets of libraries, the QTouch Library and the QTouch

Safety Library. The QTouch Library supports both mutual and self

capacitance methods. The QTouch Safety Library is available for both GCC

and IAR. The QTouch Safety Library also supports both the mutual

capacitance method and self capacitance method along with the additional

safety features.

Features

•Implements low-power, high-sensitivity, environmentally robust

capacitive touch buttons, sliders, and wheels

•Supports mutual capacitance and self capacitance sensing

•Upto 256 channels in mutual-capacitance mode

•Upto 32 channels in self-capacitance mode

•Two pin per electrode in mutual capacitance mode - with no external

components

•One pin per electrode in self capacitance mode - with no external

components

•Load compensating charge sensing

Atmel-42679C-SAM-C20-QTouch-Safety-Library_User Guide-07/2016

•Parasitic capacitance compensation for mutual capacitance mode

•Adjustable gain for superior sensitivity

•Zero drift over the temperature and VDD range

•No need for temperature or VDD compensation

•Hardware noise filtering and noise signal desynchronization for high conducted immunity

•Supports moisture tolerance

•Atmel provided QTouch Safety Library firmware

•Supports Sensor Enable and Disable at Runtime

•Supports Quick Reburst Feature for Faster Response Time

•Low Power Sensor Support

The following features are available only in the QTouch Safety Library:

•CRC protection

•Logical program flow sequence

•Memory protection using double inverse mechanism

•Library RAM relocation and

•Compile-time and Run-time check

For more information about the capacitance related technological concepts, Refer Chapter 4 in Atmel

QTouch LibraryPeripheral Touch Controller User Guide [42195] available at www.atmel.com.

Product Support

For assistance related to QTouch capacitive touch sensing software libraries and related issues, contact

your localAtmel sales representative or log on to myAtmel Design Support portal to submit a support

request or access acomprehensive knowledge base. If you don’t have a myAtmel account, please visit

http://www.atmel.com/design-support/ to create a new account byclicking on “Create Account” in the

myAtmel menu at the top of the page. Once logged in, you will be able to access the knowledge base,

submit new support cases from the myAtmel page orreview status of your ongoing cases.

Atmel SAM C20 Safety Library [USER GUIDE]

Atmel-42679C-SAM-C20-QTouch-Safety-Library_User Guide-07/2016

Table of Contents

Introduction......................................................................................................................1

Features.......................................................................................................................... 1

1. Development Tools.................................................................................................... 5

1.1. Device Variants Supported........................................................................................................... 5

2. QTouch Safety Library .............................................................................................. 6

2.1. API Overview................................................................................................................................6

2.2. Sequence of Operation................................................................................................................ 8

2.3. Program Flow .............................................................................................................................. 9

2.4. Configuration Parameters...........................................................................................................10

2.5. Touch Library Error Reporting Mechanism.................................................................................25

2.6. Touch Library Program Counter Test..........................................................................................25

2.7. CRC on Touch Input Configuration.............................................................................................27

2.8. Double Inverse Memory Check.................................................................................................. 30

2.9. Application Burst Again Mechanism...........................................................................................35

2.10. Memory Requirement.................................................................................................................35

2.11. API Execution Time.................................................................................................................... 37

2.12. Error Intepretation.......................................................................................................................41

2.13. Data and Function Protection.....................................................................................................44

2.14. Moisture Tolerance..................................................................................................................... 45

2.15. Quick Re-burst............................................................................................................................47

2.16. Reading Sensor States...............................................................................................................47

2.17. Touch Library Suspend Resume Operation............................................................................... 48

2.18. Drifting On Disabled Sensors..................................................................................................... 50

2.19. Capacitive Touch Low Power Sensor.........................................................................................51

3. QTouch Safety Library API...................................................................................... 57

3.1. Typedefs.....................................................................................................................................57

3.2. Macros........................................................................................................................................57

3.3. Enumerations............................................................................................................................. 58

3.4. Data Structures...........................................................................................................................66

3.5. Global Variables......................................................................................................................... 74

3.6. Functions....................................................................................................................................76

4. FMEA.......................................................................................................................86

4.1. Double Inverse Memory Check.................................................................................................. 86

4.2. Memory Requirement.................................................................................................................86

4.3. API Execution Time.................................................................................................................... 87

4.4. Error Interpretation..................................................................................................................... 89

4.5. Data and Function Protection.....................................................................................................89

4.6. FMEA Considerations.................................................................................................................90

5. FMEA API................................................................................................................91

Specyfikacje produktu

Marka:	Microchip
Kategoria:	Niesklasyfikowane
Model:	ATSAMC20N18A

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Microchip ATSAMC20N18A, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane Microchip

Microchip ATECC608B Instrukcja

7 Października 2024

Microchip HV860 Instrukcja

7 Października 2024

Microchip EVB-LAN9255 Instrukcja

7 Października 2024

Microchip LX4580 Instrukcja

7 Października 2024

Microchip LX7720 Instrukcja

7 Października 2024

Microchip AT32UC3C0128C Instrukcja

4 Października 2024

Microchip AT32UC3A3256 Instrukcja

4 Października 2024

Microchip AT32UC3A364 Instrukcja

4 Października 2024

Microchip AT32UC3B0256 Instrukcja

4 Października 2024

Microchip AT32UC3A0512 Instrukcja

4 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024

Stihl HT 70 Instrukcja

15 Października 2024

Ernesto H14270 Instrukcja

15 Października 2024

Uniden BT MIC KIT Instrukcja

15 Października 2024

Vaude Omnis Bike 26 Instrukcja

15 Października 2024

ART ProChannel II Instrukcja

15 Października 2024

Aukey DR02J Instrukcja

15 Października 2024

Master Lock 653EURD Instrukcja

15 Października 2024

Roland FR-18 Diatonic Instrukcja

15 Października 2024