Instrukcja obsługi Metra TE-CPSS

Metra kamera samochodowa TE-CPSS

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Metra TE-CPSS (2 stron) w kategorii kamera samochodowa. Ta instrukcja była pomocna dla 39 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
TE-CPSS
Product Manual
TE-CPSS
Product Manual
800.221.0932
iBeamUSA.com
460 Walker Street, Holly Hill, FL 32117
800.221.0932
iBeamUSA.com
460 Walker Street, Holly Hill, FL 32117
1) Find a suitable location to surface mount install the camera. Make sure the
camera’s view is unobstructed and be careful not to drill into any wires that might
damage the vehicle. When all connections have been made and before mounting
the camera, verify the camera is working and has good view of the area. Then
mount the camera down with the supplied two screws.
2) Connect the RED wire to the +12 volt reverse wire
3) Connect the BLACK wire to ground (a metal, non-painted surface).
4) Run video cable though vehicle, up to video display. (Avoid placing video cable
where it can get pinched or damaged).
5) Attach the YELLOW video rca to camera’s output and to the reverse camera input
of the radio or video display.
6) Attach audible device to camera’s mini pin plug and place audible device in a safe
area (avoid placing video cable where it can get pinched or damaged). Also place
the device where the device can be clearly heard.
NOTE: The camera is supplied with 3 angled mounting plates, (3 degree, 5 degree
and 7 degree) to assure the proper viewing angle of the camera system.
1) Find a suitable location to surface mount install the camera. Make sure the
camera’s view is unobstructed and be careful not to drill into any wires that might
damage the vehicle. When all connections have been made and before mounting
the camera, verify the camera is working and has good view of the area. Then
mount the camera down with the supplied two screws.
2) Connect the RED wire to the +12 volt reverse wire
3) Connect the BLACK wire to ground (a metal, non-painted surface).
4) Run video cable though vehicle, up to video display. (Avoid placing video cable
where it can get pinched or damaged).
5) Attach the YELLOW video rca to camera’s output and to the reverse camera input
of the radio or video display.
6) Attach audible device to camera’s mini pin plug and place audible device in a safe
area (avoid placing video cable where it can get pinched or damaged). Also place
the device where the device can be clearly heard.
NOTE: The camera is supplied with 3 angled mounting plates, (3 degree, 5 degree
and 7 degree) to assure the proper viewing angle of the camera system.
II. Connection
II. Connection
I. Specifications
I. Specifications
SENSOR
Effective Pixel
Horizontal Sync Frequency
Vertical Sync Frequency
Scanning System
Sync System
AGC
BLC
Resolution
S/N Ratio
Current Consumption
Power Supply
Operating Temperature
Storage Tempurature
Viewing Angle
Water-Proof
Minimum Illumination
SENSOR
Effective Pixel
Horizontal Sync Frequency
Vertical Sync Frequency
Scanning System
Sync System
AGC
BLC
Resolution
S/N Ratio
Current Consumption
Power Supply
Operating Temperature
Storage Tempurature
Viewing Angle
Water-Proof
Minimum Illumination
CMOS II
656 X 492
15625KHZ
PAL50HZ / NTSC 60HZ
2 : 1 Interlace
Internal
Auto
Auto
420 TV Lines
More Than 48dB
No More 150mA
DC12V ± 10%
-22° ~ 176° F
-40° ~ 176° F
170°
IP67
0.5Lux/F1.2(0Lux with LED)
CMOS II
656 X 492
15625KHZ
PAL50HZ / NTSC 60HZ
2 : 1 Interlace
Internal
Auto
Auto
420 TV Lines
More Than 48dB
No More 150mA
DC12V ± 10%
-22° ~ 176° F
-40° ~ 176° F
170°
IP67
0.5Lux/F1.2(0Lux with LED)
CAMERA
POWER
MINI PIN BUZZER
(RED) 12+
(BLACK) 12-
VIDEO (YELLOW RCA)
CAMERA
POWER
MINI PIN BUZZER
(RED) 12+
(BLACK) 12-
VIDEO (YELLOW RCA)
The TE-CPSS is a camera and parking sensor system all in one unit,
with an audible warning device to alert drivers as well as an on
screen display showing distance to object.
The TE-CPSS is a camera and parking sensor system all in one unit,
with an audible warning device to alert drivers as well as an on
screen display showing distance to object.

Specyfikacje produktu

Marka: Metra
Kategoria: kamera samochodowa
Model: TE-CPSS

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Metra TE-CPSS, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje kamera samochodowa Metra

Metra

Metra TE-RMH Instrukcja

22 Września 2024
Metra

Metra TE-3BMC Instrukcja

21 Września 2024
Metra

Metra JP-JLKT Instrukcja

21 Września 2024
Metra

Metra TE-FDH Instrukcja

20 Września 2024
Metra

Metra TE-FDHDH Instrukcja

20 Września 2024
Metra

Metra TE-FDFTG Instrukcja

20 Września 2024
Metra

Metra TE-SRBC Instrukcja

19 Września 2024
Metra

Metra TE-TUTGC Instrukcja

19 Września 2024
Metra

Metra TE-190 Instrukcja

19 Września 2024
Metra

Metra JP-JTKT Instrukcja

18 Września 2024

Instrukcje kamera samochodowa

Najnowsze instrukcje dla kamera samochodowa

Rexing

Rexing V1P Flex X4 Instrukcja

12 Marca 2025
Rexing

Rexing R316 Instrukcja

12 Marca 2025
Rexing

Rexing V33 Plus Instrukcja

12 Marca 2025
Mio

Mio MiVue J20 Instrukcja

21 Lutego 2025
BlackVue

BlackVue CM100GLTE Instrukcja

19 Lutego 2025
Kogan

Kogan KAACCHWKITA Instrukcja

11 Lutego 2025
Hikvision

Hikvision AE-DC5313-C6 Instrukcja

7 Lutego 2025
Dometic

Dometic PerfectView RVSC2 Instrukcja

4 Lutego 2025
Garmin

Garmin nuviCam LMTHD Instrukcja

15 Stycznia 2025
Rexing

Rexing V33 Instrukcja

14 Stycznia 2025