Instrukcja obsługi Metra TE-CCM1
Metra
kamera dash cam
TE-CCM1
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Metra TE-CCM1 (4 stron) w kategorii kamera dash cam. Ta instrukcja była pomocna dla 21 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/4
©COPYRIGHT 2021 METRA ELECTRONICS CORPORATION
iBEAMUSA.comiBEAM Vehicle Safety Systems ®REV. 04/30/2021 INSTTE-CCM1
Attention!
When testing the aftermarket
equipment, ensure that all factory equip-
ment is connected before cycling the key to
ignition.
TE-CCM1
INSTALLATION INSTRUCTIONS
#IBEAMSAFETY
Camera 2 ....................................................................
Wiring......................................................................3
Specifications..........................................................4
TABLE OF CONTENTS
TOOLS REQUIRED
• Wire stripper
• Tape
• Digital Multi-meter
Commercial Heavy Duty Camera
With Microphone
Visit for more detailed informatuon about the product and up-to-date vehicle specific
iBEAMUSA.com
applications.
Product Features
• Heavy duty metal housing
• 18 IR LEDs for night viewing
• Selectable parking lines
• PAL and NTSC selectable
• Microphone for audio
Part Components
A) Camera B) 4-pin to RCA adapter and hardware C) Extension (Sold separately)
A B C
386-257-1187
|
iBEAMUSA.com
2
Camera install
1. There are two loops on the camera. If
there is a not a need for parking lines,
the loop will need to be cut. (Default
lines on) If the video format needs to be
changed, the loop will need to be cut.
(Default NTSC)
• Green - parking lines
• White - PAL or NTSC format
2. Depending on your installation needs,
the camera wire does have a grommet
inline to use to help with sealing the
entry place to the vehicle. iBEAM also
suggest using some silicon to better help
with water from entering the vehicle.
3. Once installed use the provided stainless
screws (Figure B) to secure base in place
with the camera. This can also be done
before mounting and tightened once
mounted. (Figure C)
Figure A Figure B
Figure C
INSTALLATION
REV. 04/30/2021 INSTTE-CCM1 3
Figure A
Monitor
Monitor
TE-CEX10, TE-CEX20, TE-HEX10 or TE-HEX20
needed and sold separately
TE-CEX10, TE-CEX20, TE-HEX10 or TE-HEX20
needed and sold separately
BLACK - Ground
RED - 12V
WIRING
Wiring
Depending on the monitor that the camera will
be connected to, there can be two different
ways of wiring.
1. Figure A - Connecting to a 4-pin
comnmercial monitor. Using the iBeam
commercial camera extension (sold
separately) part # TE-CEX10, TE-CEX20,
TE-HEX10 or TE-HEX20 depending on your
desired length.
2. Figure B - Connecting to a RCA connection
style monitor. Using the supplied RCA to
4-pin adapter, connect the desired length
of commercial camera extension listed
above.
• RED wire connect to 12V accessory
or reverse trigger depending on your
need for the camera.
• Black wire connect to ground.
• YELLOW RCA to video input on
monitor
• WHITE RCA to audio on monitor
Figure B
Specyfikacje produktu
| Marka: | Metra |
| Kategoria: | kamera dash cam |
| Model: | TE-CCM1 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Metra TE-CCM1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje kamera dash cam Metra
15 Maja 2024
9 Maja 2024
8 Maja 2024
8 Maja 2024
7 Maja 2024
6 Maja 2024
Instrukcje kamera dash cam
- kamera dash cam AZDome
- kamera dash cam Ring
- kamera dash cam Garmin
- kamera dash cam Blaupunkt
- kamera dash cam Alpine
- kamera dash cam Cobra
- kamera dash cam Thinkware
- kamera dash cam Clarion
- kamera dash cam Pyle
- kamera dash cam EchoMaster
- kamera dash cam Prestigio
- kamera dash cam Pro-User
- kamera dash cam Nextbase
- kamera dash cam Transcend
Najnowsze instrukcje dla kamera dash cam
22 Czerwca 2024
22 Czerwca 2024
22 Czerwca 2024
22 Czerwca 2024
22 Czerwca 2024
31 Maja 2024
28 Maja 2024
27 Maja 2024
27 Maja 2024
26 Maja 2024