Instrukcja obsługi Metra 99-7639HG


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Metra 99-7639HG (16 stron) w kategorii zestaw samochodowy. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/16
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 2/3/21 INST99-7639HG
I N S TA L L AT I O N I N S T R U C T I O N S
99-7639HG
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT FEATURES
• ISO DIN radio provision with pocket
• Painted high gloss to match factory finish
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (8) #8 x 3/8” Phillips screws TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 12mm socket wrench • T-20 Torx driver
TABLE OF CONTENTS
Dash Disassembly .............................................. 2-5
Kit Assembly ..........................................................6
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: 70-7552
Antenna Adapter: 40-NI12
A B C D
Nissan Titan 2020-Up
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
386.257.1187
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Remove the (2) Phillips screws securing
the knee bolster panel below the
steering column, and then unclip the
panel. It is not necessary to completely
remove the panel. (Figure A)
2. Unclip and remove the passenger door
sill and kick panel. (Figure B)
3. Remove the (5) Phillips screws securing
the glove box and then remove. There
are (2) screws below the glove box, and
(3) screws exposed when you open the
glove box. (Figures C and D)
Continued on next page
(Figure B)
(Figure D)
(Figure A) (Figure C)
Upper screws
Lower screws
REV. 2/3/2021 INST99-7639HG 3
DASH DISASSEMBLY
4. Unclip and remove the (2) side trim
panels at the front of the center console,
and then remove the (1) Phillips screw
exposed behind each panel. Tip: Pull
out on the front sides of the console to
release for later steps. (Figure E)
5. Slide both of the front seats forward and
then remove the (2) 12mm bolts from
the rear sides of the center console. Slide
the seat back once done. (Figure F)
6. Unclip and remove either the front
console pocket or heated seat controls,
depending on options available.
(Figure G)
Continued on next page
(Figure F)(Figure E) (Figure G)


Specyfikacje produktu

Marka: Metra
Kategoria: zestaw samochodowy
Model: 99-7639HG

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Metra 99-7639HG, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje zestaw samochodowy Metra

Metra

Metra 95-5026 Instrukcja

28 Grudnia 2024
Metra

Metra 95-7883HG Instrukcja

28 Grudnia 2024
Metra

Metra AX-ADCT4 Instrukcja

28 Grudnia 2024
Metra

Metra 99-7345B Instrukcja

28 Grudnia 2024
Metra

Metra 99-7339B Instrukcja

28 Grudnia 2024
Metra

Metra 99-7367HG Instrukcja

8 Października 2024
Metra

Metra 99-8223 Instrukcja

8 Października 2024
Metra

Metra 99-7422 Instrukcja

8 Października 2024
Metra

Metra 99-7875 Instrukcja

8 Października 2024
Metra

Metra 99-3302 Instrukcja

8 Października 2024

Instrukcje zestaw samochodowy

Najnowsze instrukcje dla zestaw samochodowy

Nokia

Nokia HF-33W Instrukcja

15 Stycznia 2025
Scosche

Scosche HA1714B Instrukcja

28 Grudnia 2024
HTC

HTC Car Kit Instrukcja

15 Grudnia 2024
Scosche

Scosche BTFreq Pro Instrukcja

7 Października 2024
Kogan

Kogan KAPCARSTE7A Instrukcja

7 Października 2024
Arkon

Arkon SM517 Instrukcja

6 Października 2024
Pioneer

Pioneer 12.301232-04 Instrukcja

6 Października 2024
Havis

Havis C-HDM-201 Instrukcja

5 Października 2024
Havis

Havis PKG-PSM-215 Instrukcja

5 Października 2024