Instrukcja obsługi Metra 99-5832G

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Metra 99-5832G (4 stron) w kategorii zestaw samochodowy. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
REV. 4/20/2016 INST99-5832G
INSTALLATION INSTRUCTIONS FOR PART 99-5832G
METRA. The World’s best kits.metraonline.com © COPYRIGHT 2016 METRA ELECTRONICS CORPORATION
CAUTION!
All accessories, switches, climate controls panels,
and especially air bag indicator lights must be connected before
cycling the ignition. Also, do not remove the factory radio with
the key in the on position, or while the vehicle is running.
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
Radio trim panel is painted gray
A) Radio trim panel • B) Dash panelC) Radio brackets • D) Pocket • E) Airbag light blank
• F) (4) #8 x 3/8” Phillips truss head screws • G) (2) #8 x 3/8” Phillips pan head screws • H) (3) Metal “U panel clips
• I) (5) Metal “D panel clips • J) (4) Small metal D” panel clips • K) (4) Plastic panel clips
KIT FEATURES
KIT COMPONENTS
• Panel removal tool • Phillips screwdriver
• Socket wrench T-20 Torx screwdriver
TOOLS REQUIRED
(without 4.2” screen)
A
Table of Contents
B DC
F G H I J K
E
Dash Disassembly ..................................................2
Kit Preparation ........................................................2
Kit Assembly
– 3 ISO DIN radio provision with pocket .......................
– 3 ISO DDIN radio provision .......................................
Final Assembly .......................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wire harness: • 70-5524 Antenna adapter: • 40-EU10
99-5832G
1. Unclip the dash panel above the
radio. (Figure A)
2. Remove (2) T-20 Torx screws
securing the factory radio/trim
panel. (Figure B)
3. Unclip the factory radio/trim panel
from the dash, unplug and remove.
(Figure B)
4. Remove (1) T-20 Torx screw per
vent then unclip and remove the
vents from the factory radio/trim
panel. (Figure C)
5. Unclip and remove the hazard
switch assembly from the factory
radio/trim panel. (Figure D)
Continue to kit preparation
Dash Disassembly Kit Preparation
1. Secure the factory vents to the radio
trim panel using the (2) #8 x 3/8”
Phillips pan head screws provided.
(Figure A)
2. Snap the factory hazard button into the
radio trim panel. An airbag light blank
has been included for models without a
passenger airbag indicator. (Figure A)
(Figure B)
(Figure A) (Figure D) (Figure B) (Figure C)
(Figure C) (Figure A)
3. Attach the (4) plastic panel clips
provided, to the radio trim panel.
(Figure B)
4. Attach the (12) metal panel clips
provided, to the . (Figure C)dash panel
Continue to kit assembly
99-5832G
Kit Assembly Final Assembly
ISO DIN radio provision with pocket
1. Attach the pocket radio to the
brackets using the (4) supplied
#8 x 3/8” Phillips truss head screws.
(Figure A)
2. Remove the metal DIN sleeve and
trim ring from the aftermarket radio.
3. Slide the radio into the completed
assembly and then secure it using
the screws supplied with the radio.
(Figure B)
Continue to final assembly
ISO DDIN radio provision
1. Attach the to the radio brackets
radio using screws supplied with
the radio. (Figure C)
Continue to final assembly
(Figure A)
(Figure C) (Figure A)
(Figure B)
1. Cut the shaded portion from the
sub-dash of the vehicle to allow
the radio to fit. (Figure A)
2. Locate the factory wiring harness
and antenna connector in the
dash and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Test the radio for
proper operation.
3. Secure the radio into the dash.
4. Snap the over radio trim panel
the radio and then reassemble
the dash in reverse order of
disassembly.
Remove shaded area

Specyfikacje produktu

Marka: Metra
Kategoria: zestaw samochodowy
Model: 99-5832G

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Metra 99-5832G, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje zestaw samochodowy Metra

Metra

Metra 99-7367HG Instrukcja

8 Października 2024
Metra

Metra 99-8223 Instrukcja

8 Października 2024
Metra

Metra 99-7422 Instrukcja

8 Października 2024
Metra

Metra 99-7875 Instrukcja

8 Października 2024
Metra

Metra 99-3302 Instrukcja

8 Października 2024
Metra

Metra 99-5802 Instrukcja

8 Października 2024
Metra

Metra 99-7874 Instrukcja

8 Października 2024
Metra

Metra 99-5832G Instrukcja

8 Października 2024
Metra

Metra 99-9011 Instrukcja

8 Października 2024
Metra

Metra 99-6000 Instrukcja

8 Października 2024

Instrukcje zestaw samochodowy

Najnowsze instrukcje dla zestaw samochodowy

Scosche

Scosche BTFreq Pro Instrukcja

7 Października 2024
Kogan

Kogan KAPCARSTE7A Instrukcja

7 Października 2024
Arkon

Arkon SM517 Instrukcja

6 Października 2024
Pioneer

Pioneer 12.301232-04 Instrukcja

6 Października 2024
Havis

Havis C-HDM-201 Instrukcja

5 Października 2024
Havis

Havis PKG-PSM-215 Instrukcja

5 Października 2024
Havis

Havis PKG-PSM-201 Instrukcja

5 Października 2024
Brodit

Brodit ProClip 854746 Instrukcja

2 Października 2024
Brodit

Brodit ProClip 854744 Instrukcja

2 Października 2024