Instrukcja obsługi Metra 95-9611B
Metra
zestaw samochodowy
95-9611B
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Metra 95-9611B (12 stron) w kategorii zestaw samochodowy. Ta instrukcja była pomocna dla 23 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/12
The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 08/19/20 INST95-9611B
I N S TA L L A T I O N I N S T R U C T I O N S
95-9611B
Attention!
Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT FEATURES
• ISO DDIN radio provision
• Includes an Axxess interface for retaining CAN data information
• Includes an Axxess interface for retaining steering wheel control
functionality
• Painted matte black
KIT COMPONENTS
• A) Radio bezel • B) Radio brackets • C) ISO DDIN trim ring •
D) Phillips
machine-thread
screws (4)
• E) Phillips
standard-thread
screws (4)
• F) Axxess interface (not shown) • G) Axxess SWC interface (not shown)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Thin flat-blade screwdriver • T-27 Torx screwdriver
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly ..........................................................3
Axxess Interface Installation ..............................4-6
Final Assembly .......................................................7
User Guide .......................................................... 7-11
A B C
E
D
Porsche Cayenne
(958)*†
2011-2016
* For non-amplified vehicles with OEM parking sensors and graphics on vehicle screen
† Without amp
Visit for more detailed information about the product and up-to-date vehicle
MetraOnline.com
specific applications
WIRING & ANTENNA CONNETIONS
Wiring Harness: Included with kit
Antenna Adapter: Included with kit
Steering Wheel Control Interface: Included with kit
386-257-1187
|
MetraOnline.com
2
1. Unclip, unplug and remove the center
a/c vents. There are (6) clips † on each
vent that secure it to the dash. To
release the clips, insert a thin flat-blade
screwdriver into the vents, then push
on the clips outward. Release the
outermost clips first. (Figure A)
† The clips are located: (1) top, (1) bottom,
(2) each side. (Figure B)
2. Remove (4) T-27 Torx screws securing
the radio. Slide the radio out, then
unplug and remove. (Figure C)
Continue to Kit Assembly
DASH DISASSEMBLY
(Figure A)
(Figure B)
(Figure C)
REV. 08/19/2020 INST95-9611B 3
KIT ASSEMBLY
1. Secure the radio brackets to the radio
using screws supplied with the radio.
(Figure A)
There are (4) Phillips machine-Note:
thread screws provided in case the
radio doesn’t come with screws.
2. Place the radio bezel over the radio
assembly, then secure using (4) Phillips
standard-thread screws provided.
(Figure B)
An Note: ISO DDIN trim plate is
provided for smaller nose radios which
produce a gap around the radio.
Continue to Axxess
Interface Installation
(Figure B)(Figure A)
Specyfikacje produktu
Marka: | Metra |
Kategoria: | zestaw samochodowy |
Model: | 95-9611B |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Metra 95-9611B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje zestaw samochodowy Metra
20 Maja 2024
14 Maja 2024
11 Maja 2024
11 Maja 2024
11 Maja 2024
10 Maja 2024
10 Maja 2024
10 Maja 2024
9 Maja 2024
8 Maja 2024
Instrukcje zestaw samochodowy
- zestaw samochodowy Motorola
- zestaw samochodowy Nokia
- zestaw samochodowy Blaupunkt
- zestaw samochodowy Scosche
- zestaw samochodowy Renkforce
- zestaw samochodowy Uniden
- zestaw samochodowy Hama
- zestaw samochodowy Havis
Najnowsze instrukcje dla zestaw samochodowy
9 Lipca 2024
9 Lipca 2024
9 Lipca 2024
8 Lipca 2024
22 Czerwca 2024
22 Czerwca 2024
22 Czerwca 2024
21 Czerwca 2024
15 Czerwca 2024
28 Maja 2024