Instrukcja obsługi Metra 95-7636B
Metra
zestaw samochodowy
95-7636B
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Metra 95-7636B (4 stron) w kategorii zestaw samochodowy. Ta instrukcja była pomocna dla 22 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/4
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 3/12/19 INST95-7636B
I N S TA L L AT I O N I N S T R U C T I O N S
95-7636B
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT FEATURES
• ISO DDIN radio provision
• Painted matte black
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
TABLE OF CONTENTS
Dash Disassembly ...............................................2-3
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: 70-7552
Antenna Adapter: 40-NI12
Nissan Kicks 2018-up
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
A B
1.800.221.0932
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Unclip the driver’s side panel to the
right of the steering column. The panel
only needs unclipped enough to remove
the dash panel in the following steps.
(Figure A)
2. Open the passenger door, then unclip
and remove the panel on the side of the
dash. Remove (1) Phillips screw exposed.
(Figure B)
3. Open the glove box, then unclip and
remove the glove box. (Figure C)
4. Remove (9) Phillips screws in the glove
box cavity, then remove the glove box
housing. (Figure D)
Continued on the next page
(Figure A) (Figure C)
(Figure B) (Figure D)
REV. 2/14/2019 INST95-7636B 3
1. Secure the radio brackets to the radio
using the screws supplied with the
radio. (Figure A)
2. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
3. Secure the radio assembly to the dash
using the factory screws.
4. Clip the radio trim panel to the dash.
5.
Reassemble the dash in reverse order of
disassembly to complete the installation.
KIT ASSEMBLYDASH DISASSEMBLY (CONT.)
(Figure A)
(Figure E)
(Figure F)
(Figure G)
5. Remove (1) Phillips screw securing the
passenger side a/c vent, then remove
the vent. (Figure E)
6. Remove (1) Phillips screw securing the
dash panel above the glovebox, then
unclip and remove the panel. (Figure F)
7. Remove (4) Phillips screw securing the
radio. Slide the radio out then unclip and
remove the radio. (Figure G)
Continue to Kit Assembly
unit
Specyfikacje produktu
Marka: | Metra |
Kategoria: | zestaw samochodowy |
Model: | 95-7636B |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Metra 95-7636B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje zestaw samochodowy Metra
20 Maja 2024
14 Maja 2024
11 Maja 2024
11 Maja 2024
11 Maja 2024
10 Maja 2024
10 Maja 2024
10 Maja 2024
9 Maja 2024
8 Maja 2024
Instrukcje zestaw samochodowy
- zestaw samochodowy Motorola
- zestaw samochodowy Nokia
- zestaw samochodowy Blaupunkt
- zestaw samochodowy Scosche
- zestaw samochodowy Renkforce
- zestaw samochodowy Uniden
- zestaw samochodowy Hama
- zestaw samochodowy Havis
Najnowsze instrukcje dla zestaw samochodowy
9 Lipca 2024
9 Lipca 2024
9 Lipca 2024
8 Lipca 2024
22 Czerwca 2024
22 Czerwca 2024
22 Czerwca 2024
21 Czerwca 2024
15 Czerwca 2024
28 Maja 2024