Instrukcja obsługi Metra 95-7427B
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Metra 95-7427B (4 stron) w kategorii Carkit. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/4
METRA. The World’s best kits.™metraonline.com © COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION
REV. 7/16/2015 INST95-7427
Installation instructions for part 95-7427
CAUTION!
Metra recommends disconnecting the negative bat
-
tery terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your local
Dealership for more information. All accessories, switches, climate
controls panels, and especially air bag indicator lights must be con
-
nected before reconnecting the battery or cycling the ignition. Also,
do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition
and then wait a few seconds before removing the factory radio.
• ISO DDIN radio provision
• PAINTED TO MATCH FACTORY DASH:
95-7427B=BLACK, 95-7427G=GRAY
• Textured To Match Factory Dash
• A) Double DIN radio housing
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7552
Antenna Adapter: • 40-NI12
• Torx screwdriver • Panel removal tool • Phillips screwdriver
TOOLS REQUIRED
(w/o Navigation or Technology Package)
A
Dash Disassembly ................................................. 2
Kit Assembly
– ISO DDIN radio provision 3 ......................................
Table of Contents
95-7427
1. Unclip and remove the panel above
the radio including the a/c vents
and the climate controls. Unplug
and remove the panel. (Figure A)
2. Unclip and remove the panel below
the radio. (Figure B)
3. Remove (6) Phillips screws
securing the radio. Unplug and
remove the radio. (Figure C)
4. Remove (4) Torx head screws
securing each side bracket to the
factory radio. Slightly loosen (1)
Torx head screw from each side of
the module below the radio, and
then remove just the radio. Retain
the brackets and module for re-use
during kit assembly. (Figure D)
Continue to kit assembly
Dash Disassembly
(Figure B) (Figure D)
X
O FF
PAS S
AIR
BAG
CD CHANGER
AUX IN
(Figure A) (Figure C)
95-7427
Kit Assembly
(Figure A)
ISO DDIN radio provision
1. Attach the factory brackets and
module removed from disassembly
to the aftermarket radio with the
screws supplied with the radio.
Tighten the (2) Torx head screws to
the module that were loosened in
disassembly. (Figure A)
2. Locate the factory wiring harness
and antenna plug in the dash and
make all necessary connections
to the radio. Metra recommends
using the proper mating adapters
from Metra and/or AXXESS.
Re-connect the negative battery
terminal and test the radio for
proper operation.
3. Mount the new radio assembly into
the dash and reassemble the dash
in reverse order of disassembly.
Specyfikacje produktu
Marka: | Metra |
Kategoria: | Carkit |
Model: | 95-7427B |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Metra 95-7427B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Carkit Metra
19 Września 2024
19 Września 2024
17 Września 2024
Instrukcje Carkit
- Carkit Motorola
- Carkit Pioneer
- Carkit SilverCrest
- Carkit Nokia
- Carkit Nedis
- Carkit Medion
- Carkit Scosche
- Carkit Gembird
- Carkit JVC
- Carkit SuperTooth
- Carkit Uniden
- Carkit Parrot
- Carkit Hama
- Carkit Caliber
- Carkit Bury
- Carkit MT Logic
- Carkit Mr Handsfree
- Carkit HQ
- Carkit PAC
- Carkit Dymond
- Carkit Iluv
- Carkit KRAM
- Carkit NAV-TV
Najnowsze instrukcje dla Carkit
19 Września 2024
19 Września 2024
19 Września 2024
18 Września 2024
18 Września 2024
17 Września 2024
17 Września 2024
17 Września 2024
16 Września 2024
16 Września 2024