Instrukcja obsługi Metra 95-6528B

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Metra 95-6528B (16 stron) w kategorii zestaw samochodowy. Ta instrukcja była pomocna dla 20 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/16
METRA. The World’s best kits.metraonline.com1-800-221-0932 © COPYRIGHT 2015 METRA ELECTRONICS CORPORATION
REV. 9/22/2015 INST95-6528B
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
Installation instructions for part 95-6528B
ISO Double DIN radio provision
Painted matte black
A) Radio trim panel • B) Radio brackets • C) Radio trim panel retainers • D) (4) #8 x 3/8” Phillips screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • XSVI-6502-NAV • CHTO-01
Antenna Adapter: • 40-CR10
• Phillips screwdriver • Panel removal tool
• Socket wrench • Cutting tool/file
TOOLS REQUIRED
A CB D
Dash Disassembly
Without center console 2 .........................................
With mini console................................................. 3
With full console 4 ..................................................
Kit Assembly
ISO Double DIN radio provision 5 .............................
Table of Contents
95-6528B
(without center console)
1. Open cup holder and remove (2)
Phillips screws facing up on front
edge of radio/climate control panel.
(Figure A)
2. Unclip and remove entire panel
surrounding radio and climate
controls, including A/C vents.
(Figure B)
3. Remove (4) 7mm screws securing
radio. Unplug and remove radio.
Continue to kit assembly (Figure B)(Figure A)
95-6528B
(with mini console)
1. If vehicle has floor shifter, remove
shifter knob. Then remove center
console inserts, if present.
(Figure A)
2. Remove screws securing the rear
center console to the floor panel.
Lift up on the rear center console
to clear the gear shift lever, if
present. (Figure B)
3. Remove screws securing the front
center console to the floor panel.
Unclip and remove the front center
console. (Figure C)
4. Remove (2) Phillips head screws
at bottom of dash. Unsnap and
remove lower panel.
5. Remove (2) Phillips screws facing
up on front edge of radio/climate
control panel. (Figure D)
6. Unclip and remove entire panel
surrounding radio and climate
controls, including A/C vents.
(Figure E)
7. Remove (4) 7mm screws securing
radio to dash and remove radio.
Continue to kit assembly
(Figure A)
(Figure D)
(Figure B)
(Figure E)
(Figure C)

Specyfikacje produktu

Marka: Metra
Kategoria: zestaw samochodowy
Model: 95-6528B

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Metra 95-6528B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą