Instrukcja obsługi Metabo UC18YTSL
Metabo
Boormachine
UC18YTSL
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Metabo UC18YTSL (61 stron) w kategorii Boormachine. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/61
Model
Modèle
Modelo UC 18YTSL Multi Port Charger
Chargeur multi-port
Cargador multipuerto
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and
understand this manual before operating the power tool. Please keep this manual available
for other users and owners before they use the multi port charger. This manual should be
stored in safe place.
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de ce chargeur multi-port peut entraîner
la mort ou de sérieuses blessures corporelles !
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce produit.
Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil motorisé. Garder ce
mode d’emploi à la disponibilité des autres utilisateurs et propriétaires avant qu’ils utilisent
le chargeur multi-port. Ce mode d’emploi doit être conservé dans un endroit sûr.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de este cargador multipuerto puede resultar
en lesiones de gravedad o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y
comprenda este manual ANTES de utilizar la herramienta eléctrica. Guarde este manual
para que puedan leerlo otras personas antes de utilizar el cargador multipuerto. Este
manual debe ser guardado en un lugar seguro.
Designed for operating in USA & Canada only.
When this product is used in areas other than the USA & Canada,
we cannot guarantee the product quality and performance.
IMPORTANT SAFETY INSTRUCTIONS
Read and understand all of the safety precautions, warnings and operating instructions in the
Instruction Manual before operating or maintaining this multi port charger.
Most accidents that result from multi port charger operation and maintenance are caused by
the failure to observe basic safety rules or precautions. An accident can often be avoided by
recognizing a potentially hazardous situation before it occurs, and by observing appropriate
safety procedures.
Basic safety precautions are outlined in the “SAFETY” section of this Instruction Manual and in
the sections which contain the operation and maintenance instructions.
Hazards that must be avoided to prevent bodily injury or machine damage are identied by
WARNINGS on the multi port charger and in this Instruction Manual.
NEVER use this multi port charger in a manner that has not been specically recommended by
metabo HPT.
MEANINGS OF SIGNAL WORDS
WARNING indicates a potentially hazardous situations which, if ignored, could result in death
or serious injury.
CAUTION indicates a potentially hazardous situations which, if not avoided, may result in
minor or moderate injury, or may cause machine damage.
NOTE emphasizes essential information.
2
English
SAFETY
IMPORTANT SAFETY INSTRUCTIONS
FOR MULTI PORT CHARGER
WARNING: Death or serious bodily injury could result from improper or unsafe
use of multi port chargers. To avoid these risks, follow these basic
safety instructions:
READ ALL INSTRUCTIONS
1. SAVE THESE INSTRUCTIONS: This manual
contains important safety and operating instructions for multi port charger Model
UC18YTSL.
2. Before using multi port charger, read all instructions and cautionary markings on (1) multi
port charger, (2) battery, and (3) product using battery.
3. CAUTION: To reduce risk of injury, charge only metabo HPT rechargeable battery types
BSL14 series, BSL18 series, and MV series. Other type of batteries may burst causing
personal injury and damage.
4. Do not expose multi port charger to rain or snow.
5. Use of an attachment not recommended or sold by the multi port charger manufacturer may
result in a risk of re, electric shock, or injury to persons.
6. To reduce risk of damage to electric plug and cord, pull by plug when disconnecting multi
port charger.
7. Make sure cord is located so that it will not be stepped on, tripped over, or otherwise
subjected to damage or stress.
8. An extension cord should not be used unless absolutely necessary. Use of improper
extension cord could result in a risk of re and electric shock.
If extension cord must be used make sure:
a. That blades of extension cord are the same number, size, and shape as those of plug on
multi port charger:
b. That extension cord is properly wired and in good electrical condition; and
c. That wire size is large enough for AC ampere rating of multi port charger as specied in
Table 1.
Table 1
RECOMMENDED MINIMUM AWG SIZE FOR
EXTENTION CORDS FOR MULTI PORT CHARGERS
AC Input Rating Amperes* AWG Size of Cord
Equal to or
greater than
but less
than
Length of Cord, Feet (Meter)
25 (7.5) 50 (15) 100 (30) 150 (45)
0 2 18 18 18 16
2 3 18 18 16 14
3 4 18 18 16 14
3
English
Specyfikacje produktu
| Marka: | Metabo |
| Kategoria: | Boormachine |
| Model: | UC18YTSL |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Metabo UC18YTSL, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Boormachine Metabo
26 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
Instrukcje Boormachine
- Boormachine AEG
- Boormachine Worx
- Boormachine Milwaukee
- Boormachine Bosch
- Boormachine Yato
- Boormachine Parkside
- Boormachine Toolcraft
- Boormachine Festool
- Boormachine Panasonic
- Boormachine Stanley
- Boormachine Black & Decker
- Boormachine Scheppach
- Boormachine Proxxon
- Boormachine Hazet
- Boormachine DeWalt
- Boormachine Einhell
- Boormachine Genesis
- Boormachine Silverline
- Boormachine Makita
- Boormachine Ozito
- Boormachine RYOBI
- Boormachine Flex
- Boormachine DEDRA
- Boormachine Biltema
- Boormachine Hilti
- Boormachine Trotec
- Boormachine Güde
- Boormachine Bavaria
- Boormachine Westfalia
- Boormachine Fein
- Boormachine Ferm
- Boormachine Hitachi
- Boormachine Craftsman
- Boormachine PowerPlus
- Boormachine Vonroc
- Boormachine HiKOKI
- Boormachine Workzone
- Boormachine Cotech
- Boormachine Skil
- Boormachine Sun Joe
- Boormachine Bort
- Boormachine Tanaka
- Boormachine Topcraft
- Boormachine Gamma
- Boormachine Kress
- Boormachine Duro
- Boormachine Berner
- Boormachine Varo
- Boormachine Max
- Boormachine Bruder Mannesmann
- Boormachine Meister Craft
- Boormachine Rupes
- Boormachine Protool
- Boormachine Economy
- Boormachine Holzmann
- Boormachine Graphite
- Boormachine Huvema
- Boormachine Stomer
- Boormachine Elu
- Boormachine Ecomac
- Boormachine Kreg
- Boormachine Sthor
- Boormachine Wurth
- Boormachine Spit
Najnowsze instrukcje dla Boormachine
26 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024