Instrukcja obsługi Mean Well MSP-600-36

Mean Well nieskategoryzowany MSP-600-36

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Mean Well MSP-600-36 (2 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 20 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Installaon Manual

 Type：

：

：：Enclosed Type Switching Power Supply

(Families: G3, NE, LRS, SE, PFC, HSP, SPV, USP, RST, G5, MSP)

 Introducon

Enclosed type switching power supplies possess a metal or plasc case for covering their internal PCB and will be

installed inside the case of the end system. Mean Well’s enclosed type power supplies include 2 dierent groups of

power supplies, with built-in fan and without built-in fan, depending on their rated power or design concept.

 Installaon

（）1 Before any installaon or maintenance work, please disconnect your system from the ulity.

Ensure that it can’t be re-connected inadvertently!

（）2 Keep enough insulaon distance between mounng screws and internal components of power supplies. Please

refer to case drawing on specicaons to receive the maximum length of mounng screw.

（）3 Mounng orientaons other than standard orientaon or operate under high ambient temperature may

increase the internal component temperature and will require a de-rang in output current. Please refer to

the specicaon sheets to receive the opmum mounng posion and informaon about the -rang curve. de

（）4 Fans and venlaon holes must be kept free from any obstrucons. Also a 10-15 cm clearance must be kept

when the adjacent device is a heat source.

（）5 Recommended wires are shown as below.

AWG

Rated Current of

Equipment (Amp)

6-10A

10- 16A

16 25A-

25 32A-

32 40A-

Cross-secon of

Lead(mm

2 )

0.75

1.00

1.5

2.5

Note: Current each wire carries should be de-rated to 80% of the current

suggested above when using 5 or more wires connected to the unit.

Make sure that all strands of each stranded wire enter the terminal connecon and the screw terminals are

securely xed to prevent poor contact.

（）6 For other informaon about the products, please refer to www.meanwell.com for details.

 Warning / Cauon !!

（）1 Risk of electrical shock and energy hazard. All failure should be examined by a qualied technician. Please do

not remove the case of the power supply by yourself!

（）2 Please do not install power supplies in places with high moisture or near the water.

（）3 Please do not install power supplies in places with high ambient temperature or near re source. The

maximum ambient temperature please refer to their specicaons.

（）4 Output current and output waage must not exceed the rated values on specicaons.

（）5 The ground(FG) must be connected to earth ground.

（）6All MW’s PSUs are designed in accordance with EMC regulaons and the related test reports are available by

request. Since they are belong to component power supplies and will be installed inside system enclosure,

when they are integrated into a system, the EMC characteriscs of the end system must be re-veried again.

Installaon Manual

Manufacturer：

：

：：

MEAN WELL ENTERPRISES Co., LTD.

No.28, Wuquan 3rd Rd., Wugu Dist.,

New Taipei City 24891, Taiwan

Tel: +886-2-2299-6100

Web: www.meanwell.com

Branch Oce：

：

：：

China

MEAN WELL (GUANGZHOU)

ENTERPRISES Co., LTD.

2F, A Building, Yuean lndustry Park,

Huangcun,Dongpu Yown, Tianhe

District, Gungzhou, China

Post Code:510660

Tel: +86-20-2887-1200

Web: www.meanwell.com.cn

U.S.A.

MEAN WELL USA, INC.

44030 Fremont Blvd., Fremont,

CA 94538, U.S.A.

Tel: +1-510-683-8886

Web: www.meanwellusa.com

Europe

MEAN WELL EUROPE B.V.

Langs de Werf 8, 1185XT

Amstelveen, The Netherlands

Tel: + - -758-6000 31 20

Web: www.meanwell.eu

Specyfikacje produktu

Marka:	Mean Well
Kategoria:	nieskategoryzowany
Model:	MSP-600-36
Wysokość produktu:	63.5 mm
Szerokość produktu:	105 mm
Głębokość produktu:	218 mm
Waga produktu:	1570 g
Certyfikat środowiskowy (zrównoważonego rozwoju):	RoHS
Ilość na paczkę:	8 szt.
Napięcie operacyjne:	36 V
Napięcie:	90 - 264 V
Moc rzeczywista:	600 W