Instrukcja obsługi Meade Polaris
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Meade Polaris (28 stron) w kategorii teleskop. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/28
MEADE INSTRUCTION MANUAL
Polaris Series German Equatorial Telescopes POLARIS SERIES
www.meade.com
WARNING!
Never use a Meade® Telescope to look at the Sun!
Looking at or near the Sun will cause instant and
irreversible damage to your eye. Eye damage is often
painless, so there is no warning to the observer that
damage has occurred until it is too late. Do not point the
telescope at or near the Sun. Do not look through the
telescope or viewfinder as it is moving. Children should
always have adult supervision while observing.
INTRODUCTION
Your telescope is an excellent beginner’s
instrument, and is designed to observe
objects in the sky. It can be your personal
window to the universe allowing you to see
bright galaxies, planets, stars and more.
The telescope is shipped with the following
parts:
• Optical tube
• German equatorial mount
• Stainless-steel tripod with accessory tray
• Three 1.25” eyepieces:
MA25mm, MA9mm, MA6.3mm
• Red dot viewfinder with bracket
• Slow-motion control cables
• 90 degree erect-image diagonal prism
(Refractors only)
The Polaris Series of telescope includes
optical tubes of different sizes and design.
Some optical tubes use lenses to focus the
incoming light and are called refractors. Other
optical tubes use mirrors to bring the incoming
light to focus and are called reflectors.
The lens or mirror diameter of the telescope
is one of the most important pieces of
information about the telescope. The size of
the lens or mirror, also known as “aperture”,
determines how much detail you will be able
to see in your telescope. The optical tubes
focal length information is also important
and will help later on to calculate the viewing
magnification.
Setting up your telescope involves these
simple steps:
•Setup your tripod
•Attach the accessory tray
•Attach the mount
•Attach the counterweight shaft and
counterweight
•Prepare the mount
•Attach the optical tube to the mount
•Attach the red dot viewfinder
•Attach the eyepiece
1
Study the picture on the next page(s)
and become acquainted with the parts
of your telescope. Figure 1A shows
a typical reflector telescope whereas
Figure 1B shows a refractor. Then
proceed to “Setup your Tripod.”
Specyfikacje produktu
| Marka: | Meade |
| Kategoria: | teleskop |
| Model: | Polaris |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Meade Polaris, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje teleskop Meade
18 Września 2024
15 Września 2024
15 Września 2024
14 Września 2024
14 Września 2024
13 Września 2024
13 Września 2024
13 Września 2024
12 Września 2024
12 Września 2024
Instrukcje teleskop
- teleskop Marquant
- teleskop IOptron
- teleskop National Geographic
- teleskop Carson
- teleskop Bresser
- teleskop Orion
- teleskop Levenhuk
- teleskop Sky-Watcher
- teleskop GlobalTronics
- teleskop Celestron
- teleskop Barska
- teleskop Konig
- teleskop Vixen
- teleskop Discovery
- teleskop Danubia
- teleskop ZWO
- teleskop SVBONY
- teleskop DayStar Filters
- teleskop Mizar
Najnowsze instrukcje dla teleskop
8 Października 2024
4 Października 2024
4 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
2 Października 2024
1 Października 2024
1 Października 2024
29 Września 2024