Instrukcja obsługi Maytag W10469903

Maytag Magnetostrykcja W10469903

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Maytag W10469903 (8 stron) w kategorii Magnetostrykcja. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
W11039684A
INSTALLATION INSTRUCTIONS ELECTRIC
BUILT‑IN MICROWAVE OVEN SPACER KIT
INSTRUCTIONS D’INSTALLATION TROUSSE
D’ENTRETOISE POUR FOUR À MICRO‑ONDES
ÉLECTRIQUE ENCASTRÉ
Built-In Spacer Kit
Trousse d’entretoise pour four
encastré
Size and Color
Dimensions et couleur
UL Listed for Model Numbers
Homologation UL pour les
modèles numéro
W10469901 27" (68.6 cm), stainless steel
27" (68,6 cm), acier inoxydable
KMBP107ESS
W10842584 27" (68.6 cm), limited edition black
27" (68,6 cm), edition limitee en noir
KMBP107EBS
W10469903 30" (76.2 cm), stainless steel
30" (76,2 cm), acier inoxydable
KMBP100ESS
W10842586 30" (76.2 cm), limited edition black
30" (76,2 cm), édition limitée en noir
KMBP100EBS
Table of Contents/Table des matières
BUILT-IN MICROWAVE OVEN SAFETY 1 ..................................
INSTALLATION REQUIREMENTS 2 ..........................................
Tools and Parts 2 ....................................................................
Location Requirements 2 .......................................................
INSTALLATION INSTRUCTIONS 3 ...........................................
Assemble Spacer Kit 3 ............................................................
Install Spacer Kit 3 ..................................................................
Install Microwave Oven 3 ........................................................
Complete Installation 4 ...........................................................
SÉCURITÉ DU FOUR À MICRO-ONDES ENCASTRÉ 5 ...........
EXIGENCES D’INSTALLATION 6 ..............................................
Outillage et pièces 6 ................................................................
Exigences d’emplacement 6 ...................................................
INSTRUCTIONS D’INSTALLATION 7 ........................................
Assemblage de la trousse d’entretoise 7 ................................
Installation de la trousse d’entretoise 7 ...................................
Installation du four à micro-ondes........................................ 7
Achever l’installation 8 ............................................................
BUILT‑IN MICROWAVE OVEN SAFETY
You can be killed or seriously injured if you don't immediately
You can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
2
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools
listed here.
Tools needed
■Phillips screwdriver
■¼" (6.3 mm) hex
opening screwdriver
■Measuring tape
Parts supplied
A. Spacer bars (2)
B. Bottom vent (1)
C. ³⁄ 8
" hex washer head screws (4)
D. ¾" pan head screws (4)
Location Requirements
IMPORTANT: Observe all governing codes and ordinances.
■Cabinet opening dimensions that are shown must be
used. Given dimensions provide minimum clearance
with microwave oven.
■Recessed installation area must provide complete enclosure
around the recessed portion of the microwave oven.
■Microwave oven support surface must be solid, level, and
flush with bottom of cabinet cutout. Floor must be able to
support a weight of 90 lbs (41.0 kg).
IMPORTANT: To avoid damage to your cabinets, check with
your builder or cabinet supplier to make sure that the materials
used will not discolor, delaminate, or sustain other damage.
This oven has been designed in accordance with the
requirements of UL and CSA International and complies
with the maximum allowable wood cabinet temperatures
of 194°F (90°C).
Product Dimensions
27" (68.6 cm) and 30" (76.2 cm) Microwave Oven Spacer Kits
27" (68.6 cm) models
A. 26³⁄4" (67.9 cm) overall width
30" (76.2 cm) models
A. 29³⁄4" (75.6 cm) overall width
Cabinet Dimensions
27" (68.6 cm) and 30" (76.2 cm) Microwave Oven Spacer Kits
27" (68.6 cm) models
A. 27" (68.6 cm) min. cabinet
width
B. 207⁄16" (51.9 cm) bottom of
cutout to bottom of upper
cabinet door
C. 40" (101.2 cm) bottom of
cutout to floor (recommended)
D. 25¹⁄2" (64.8 cm) cutout width
E. 1¹⁄2" (3.8 cm) min. bottom of
cutout to top of cabinet door
F. 197⁄16" (49.4 cm) recommended
cutout height (will fit cutout
height from 19¼" [48.9 cm] to
19¹¹⁄16" [50.0 cm])
G. 217⁄8" (55.5 cm) min. cutout
depth
30" (76.2 cm) models
A. 30" (76.2 cm) min. cabinet
width
B. 207⁄16" (51.9 cm) bottom of
cutout to bottom of upper
cabinet door
C. 40" (101.2 cm) bottom of
cutout to floor (recommended)
D. 28¹⁄2" (72.4 cm) cutout width
E. 1¹⁄2" (3.8 cm) min. bottom of
cutout to top of cabinet door
F. 197⁄16" (49.4 cm) recommended
cutout height (will fit cutout
height from 19¼" [48.9 cm] to
19¹¹⁄16" [50.0 cm])
G. 217⁄8" (55.5 cm) min. cutout
depth
A
B
C D
A
A
B
C
D
E
FG
■Level
■Drill
■¹⁄8" (3.2 mm) drill bit
3
Minimum Installation Clearances
For proper installation, the following minimum clearances
must exist above and below the cabinet opening.
Installation Above Single Built-In Oven
A. Upper cabinet
B. Lower single oven
INSTALLATION INSTRUCTIONS
Assemble Spacer Kit
1. Attach bottom vent to spacer bars using four ³⁄8" hex washer
head screws.
NOTE: Spacer bar flanges should be facing out.
A. Bottom vent
B. Spacer bar flange
C. Spacer bars
D. ³⁄8" hex washer head screws
Install Spacer Kit
1. Center assembled microwave oven spacer kit against lower,
front edge of the cabinet cutout.
2. Using an ¹⁄8" (3.2 mm) drill bit, drill through the mounting
holes in the spacer bars to create pilot holes.
3. Attach the assembled spacer kit to the cabinet using four ¾"
pan head screws provided. Do not overtighten screws.
A. ¾" pan head screws
B. Spacer kit assembly
Install Microwave Oven
Follow the instructions below along with the instructions in the
Electric Built-In Microwave Oven Installation Instructions.
Read the “Electrical Requirements” and “Electrical Connection”
sections along with all other sections of the Installation
Instructions before installing the microwave oven.
1. Using 2 or more people, lift microwave oven partially into
cabinet cutout above spacer kit and place microwave oven
in between spacer bar flanges.
NOTE: Open microwave oven door and push against
seal area of microwave oven front frame when pushing
microwave oven into cabinet. Do not push against
outside edges.
1"
(2.5 cm)
1"
(2.5 cm)
fr
om top
of oven
A
B
A
B
C
D
D
A
B
WARNING
Excessive Weight Hazard
Use two or more people to move and install
microwave oven.
Failure to do so can result in back or other injury.

Specyfikacje produktu

Marka: Maytag
Kategoria: Magnetostrykcja
Model: W10469903

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Maytag W10469903, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Magnetostrykcja Maytag

Maytag

Maytag UMCS5022RZ Instrukcja

15 Października 2024
Maytag

Maytag UMV1160CW Instrukcja

25 Września 2024
Maytag

Maytag MMV5208WS Instrukcja

25 Września 2024
Maytag

Maytag MMV1164WS Instrukcja

25 Września 2024
Maytag

Maytag MMV4205DH Instrukcja

25 Września 2024
Maytag

Maytag MMV6190FZ Instrukcja

25 Września 2024
Maytag

Maytag MMMF6030PB Instrukcja

25 Września 2024
Maytag

Maytag MMV1153BAB Instrukcja

25 Września 2024
Maytag

Maytag MMV5208WW Instrukcja

25 Września 2024
Maytag

Maytag MMV5227JK Instrukcja

25 Września 2024

Instrukcje Magnetostrykcja

Najnowsze instrukcje dla Magnetostrykcja

Sharp

Sharp R-334W Instrukcja

15 Października 2024
Whirlpool

Whirlpool WMCS7022RS Instrukcja

15 Października 2024
Insignia

Insignia NS-MW11BK5 Instrukcja

15 Października 2024
Insignia

Insignia NS-MW7RM5 Instrukcja

15 Października 2024
Whirlpool

Whirlpool AMW 730/WH Instrukcja

14 Października 2024
Whirlpool

Whirlpool AVM 220/WP/AV Instrukcja

14 Października 2024
Daewoo

Daewoo KOR-6CDS8 Instrukcja

14 Października 2024
Pelgrim

Pelgrim MAG740 Instrukcja

13 Października 2024
Sharp

Sharp R-2V11B Instrukcja

13 Października 2024
Küppersbusch

Küppersbusch EMWG 8604.0 Instrukcja

13 Października 2024