Instrukcja obsługi Matrox G450x4 MMS

Matrox karta graficzna G450x4 MMS

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Matrox G450x4 MMS (55 stron) w kategorii karta graficzna. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/55

www.matrox.com/graphics

Graphics Solutions for Professionals

User Guide

10807-301-0220

2007.02.02

Matrox

G450 MMS

ENGLISH

2 Matrox G450 MMS – User Guide

Overview

Thank you for purchasing a G450 MMS (Multi-Monitor Series) graphics card. Your Matrox MMS

card is a high-performance graphics card that plugs into an expansion slot inside your personal

computer. With this card, you can use 2 or 4 computer monitors or TVs at a time.

Hardware supplied

Software supplied (for Windows 2000/XP and NT 4.0)

Matrox PowerDesk

– to use your Matrox graphics hardware

Other software

– see the CD-ROM

Readme

file

Installation overview

To install your Matrox product:

Install the Matrox card – see “Hardware installation”, page 3.

Install the software – see “Software installation”, page 8.

G450 MMS card *

* Pictured is a G450×4 MMS card.

Dual-monitor cable

†

† 2 dual-monitor cables are included with Matrox MMS×4 products.

DVI-to-HD15 adapters ‡

‡ 2 DVI-to-HD15 adapters are included for each dual-monitor cable.

Note:

If your Matrox product is already partially or fully installed on your computer, some

or all the installation information in this guide may not apply to you. However, this

information may be useful if you need to reinstall your Matrox product.

Matrox G450 MMS – User Guide 3

Hardware installation

This section describes how to install your Matrox card. For information specific to your computer,

like how to remove its cover, see your system manual.

1Switch to the standard VGA display driver

If you’re running Windows 2000/XP on your computer, this step isn’t necessary.

If you’re using another operating system (for example, Windows NT 4.0), see its

documentation for how to switch to VGA mode.

2Open your computer and

remove your existing graphics

card*

If a graphics card

isn’t

already installed in

your computer, skip to step 3.

Using

Add/Remove Programs

in the

Windows

Control Panel

, remove any

currently installed display drivers.

Restart your computer for the changes

to take effect.

After your computer restarts, you’re

prompted to install drivers for the new

graphics hardware detected. Click

Cancel

WA R N IN G :

To avoid personal injury, turn off your computer, unplug it, and then wait for

it to cool before you touch any of its internal parts.

While your computer is turned off but still plugged in, some electrical current is supplied

to the motherboard. This current may prevent newly installed hardware from working

properly.

Also, static electricity can severely damage electronic parts. Before touching any electronic

parts, drain static electricity from your body (for example, by touching the metal frame of

your computer). When handling a card, carefully hold it by its edges and avoid touching its

circuitry.

* With multi-display mode, you may be able to use your existing graphics card. For Windows 2000/XP, see Windows 2000/XP

online help under “Multiple Display Support”. For Windows NT 4.0, only Matrox graphics card models supported by the Matrox

display driver can be used.

Specyfikacje produktu

Marka:	Matrox
Kategoria:	karta graficzna
Model:	G450x4 MMS
Certyfikaty:	Class A - ACA, CE, CSA, FCC, VCCI
Obsługiwane systemy operacyjne Windows:	Tak
Typ interfejsu:	PCI
Układ:	Full-Height/Half-Length (FH/HL)
Rodzaj chłodzenia:	Aktywne
Maks. rozdzielczość:	2048 x 1536 px
Wersja DirectX:	Nie
Typ pamięci adaptera grafiki:	GDDR
Magistrala pamięci:	32 bit
Wysokość wspornika:	Full-Height (FH)