Instrukcja obsługi Martin EC 20

Martin Niesklasyfikowane EC 20

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Martin EC 20 (32 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/32
EC Series LED Video Panel
and
EC Series Headers
Installation and Safety
Manual
TM
TM
Dimensions
All dimensions are in millimeters
©2010 Martin Professional A/S. Information subject to change without notice. Martin Professional A/S and all affiliated companies disclaim liability for
any injury, damage, direct or indirect loss, consequential or economic loss or any other loss occasioned by the use of, inability to use or reliance on the
information contained in this manual. The Martin logo, the Martin name and all other trademarks in this document pertaining to services or products by
Martin Professional A/S or its affiliates and subsidiaries are trademarks owned or licensed by Martin Professional A/S or its affiliates or subsidiaries.
P/N 35000238, Rev. D
Safety Information 3
Safety Information
The following symbols are used to identify important safety information on the product and in this manual:
This product is for professional use only. It is not for household use.
This product presents risks of severe injury or death due to fire hazards, electric shock and falls.
Read this manual before installing, powering or servicing this product, follow the safety precautions listed
below and observe all warnings in this manual and printed on the product.
If you have questions about how to operate the panel safely, please contact your Martin supplier or call the
Martin 24-hour service hotline on +45 8740 0000, or in the USA on 1-888-tech-180.
P R O T E C T I O N F R O M E L E C T R I C S H O C K
• Connect the product to AC mains power within the range 200 - 240 V nominal at 50 or 60 Hz only.
• Disconnect the entire installation from power and ensure that power cannot be reconnected, even
accidentally, before carrying out any installation or maintenance work.
• Double-pole/neutral fusing is used. If the installation is not completely disconnected from power, parts
may remain live even if one of the two mains fuses has blown.
• Disconnect the product from power when not in use.
• Always ground (earth) the product electrically.
• Use only a source of power that complies with local building and electrical codes. Power distribution
circuits must be fitted with a current overload fuse or circuit breaker with a maximum rated current of 40 A
for European region and with a maximum rated current of 32 A for North American region, and
ground-fault (earth-fault) protection of high breaking capacity (≥1500 A).
• Connect the Header to power using only the cables supplied by Martin for this product.
• Protect power cables from water and rain.
• Connect the Header to power using only 32 amp-rated industrial Type B power plugs and socket outlets
that comply with IEC 60309 (or a comparable national standard) and provide an electrical connection to
ground (protective earth).
• External power switches or socket outlets used to supply Headers with power must be located near the
product and easily accessible so that the product can easily be disconnected from power.
• Do not connect any other device than EC-20 panels to the power throughput connector in the base of the
product.
• Connect no more than sixteen EC-20 panels in total to power in one chain using the power throughput
connectors in the base of the product.
WARNING!
Read the safety precautions in this section before
installing, powering, operating or servicing this
product.
WARNING!
Safety hazard.
Risk of severe
injury or death.
WARNING!
Refer to
manual before
installing,
powering or
servicing.
WARNING!
Hazardous
voltage. Risk of
lethal or severe
electric shock.
WARNING!
Hot surface. Do
not touch.
WARNING!
Fire hazard.
WARNING!
Emission
hazardous to
eyesight.

Specyfikacje produktu

Marka: Martin
Kategoria: Niesklasyfikowane
Model: EC 20

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Martin EC 20, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Martin

Martin

Martin Exterior Dot-1 Pro Instrukcja

9 Października 2024
Martin

Martin Exterior Dot-9 Pro Instrukcja

9 Października 2024
Martin

Martin DCE PSU 240 IP Instrukcja

9 Października 2024
Martin

Martin P3 PowerPort 500 IP Rental Instrukcja

9 Października 2024
Martin

Martin DCE Data Splitter/Booster IP Instrukcja

9 Października 2024
Martin

Martin P3 PowerPort 2000 Instrukcja

9 Października 2024
Martin

Martin P3 PowerPort 500 IP Install Instrukcja

9 Października 2024
Martin

Martin Acrobat Instrukcja

6 Października 2024
Martin

Martin 2510 Controller Instrukcja

1 Października 2024
Martin

Martin 2032 Controller Instrukcja

1 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024