Instrukcja obsługi Martin DMX Switch Pack

Martin Niesklasyfikowane DMX Switch Pack

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Martin DMX Switch Pack (8 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
DMX Switch Pack
user manual
© 1998 - 2006 Martin Professional A/S, Denmark.
All rights reserved. No part of this manual may be
reproduced, in any form or by any means, without
permission in writing from Martin Professional A/S,
Denmark.
Printed in Denmark.
P/N 35000010 Rev.D
3User Manual
Thank you for selecting the Martin DMX Switch Pack. This DMX-controlled switching
device allows you to turn on and off up to six 350 watt devices with the Martin 2518 DMX
Controller or any other DMX board. It allows you to control non-intelligent lights; and is
ideal for combining fixtures from Martin’s DJ Series with intelligent lights.
The DMX Switch Pack is not suitable for switching products with discharge lamps (prod-
ucts with fluorescent tubes or metal halide lamps).
The DMX Switch Pack is ruggedly built for years of trouble-free use. Setup and operation
are simple; please read this manual before setting up and operating the device.
S a f e t y i n f o r m a t i o n
W A R N I N G !
This product presents risks of lethal or severe injury.
This product is for professional use only. It is not for household use. Read this manual
before powering or installing the fixture, follow the safety precautions listed below and
observe all warnings in this manual and printed on the fixture. If you have questions about
how to operate the fixture safely, please contact your Martin dealer or call the Martin 24-
hour service hotline at +45 70 200 201.
To p r o t e ct yo u r s e l f a n d o t h e r s f ro m e l e c t r i c s h o c k
Disconnect the fixture from AC power before removing or installing fuses or any part,
and when not in use.
Always ground (earth) the fixture electrically.
Use only a source of AC power that complies with local building and electrical codes
and has both overload and ground-fault protection.
Do not expose the fixture to rain or moisture.
Refer all service to a qualified technician.
Never operate the fixture with missing or damaged covers.
To p r o t e ct yo u r s e l f a n d o t h e r s f ro m b u r n s a n d f i r e
Never use the device to power fixtures that exceed the specified maximum load.
Never attempt to bypass the fuses.
Always replace defective fuses with ones of the specified type and rating.
Do not modify the fixture or install other than genuine Martin parts.
To p r o t e c t yo u r s e l f a n d o t h e r s f r o m i n j u r y d u e t o f a l l s
When suspending the fixture above ground level, verify that the structure can hold at
least 10 times the weight of all installed devices.
Secure the device with a safety wire threaded through the side holes.
Block access below the work area whenever installing or removing the fixture.


Specyfikacje produktu

Marka: Martin
Kategoria: Niesklasyfikowane
Model: DMX Switch Pack

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Martin DMX Switch Pack, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Martin

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024