Instrukcja obsługi Martin Logan Exos

Martin Logan nieskategoryzowany Exos

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Martin Logan Exos (8 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
EX O S TM
u s e r ’ s m a n u a l
c l s e l e c t r o s t a t i c
M LA R T I N O G A N
2 Introduction
INTRODUCTION
Thank you for choosing MartinLogan. We are deeply com-
mitted to building only products of uncompromised quality
and technology and are dedicated to achieving perfection
in everything we do. By choosing MartinLogan you have
demonstrated your own dedication to the finer things in
life. You will not be disappointed with your choice.
The MartinLogan Exos crossover is a precision electronic
instrument that represents the culmination of an intensive,
dedicated group research program dedicated to establish-
ing a world class reference monitor. The Exos crossover is
an application-specific crossover filter network containing
both high and low pass active tone shaping that delivers
linear and extended frequency response.
We know you are eager to listen to your new crossover, so
we have provided the Exos Crossover User’s Manual.
Please read and follow these instructions as you initially
connect your crossover into your system. These instructions
are important and will prevent you from experiencing any
delay, frustration or system damage which might occur in
a trial and error procedure.
Phase Alignment
The phase alignment allows the phase to be adjusted for a
smoother blending in the crossover area. Ideally it is good
to get both the main speaker and the subwoofer in phase
at the crossover area. An easy way to set this is to try the
different setting until you get the worst sound. Then change
the phase setting by 180 degrees. For example if 270 degrees
sounds the worst use the 90 degree position.
Crossover Frequency
This control allows you to pick the crossover frequency
desired. The crossover frequency is the frequency at which
the signal is split between the subwoofer and the main
speaker. Too high of a crossover can result in boomy bass
while too low will leave a suck-out between the main
speaker's low frequency limit and the subwoofer..
Input
When lit, indicates that balanced inputs are in use by the
Exos crossover. This button should be pressed to light the
indicator LED if you are using balanced XLR connectors.
Otherwise, press the button to toggle the LED off if RCA
connectors are used.
Warning!
All outputs are always on. Do not have both the
RCA and balanced XLR connectors hooked-up
simultaneously and attempt to use this button as
an A/B switch. You will have degraded perfor-
mance and possibly damage your equipment.
Only one type of connector should be used
throughout your system.
Mute
When lit, indicates that the outputs of the EXOS are dis-
connected so that no signal reaches the power amplifiers.
Bass output
This knob controls the overall level of bass relative to the
rest of the music. Use it to adjust the amount of bass
according to your taste or for matching the output level of
your bass amplifier to that of your treble amplifier. Rotate
to the left for less bass, to the right for more. Use this to
fine tune the bass after properly setting the phase and
crossover controls.
Other Features
Push-Buttons
The EXOS uses precision push-buttons with LED indicators.
A lit LED indicates that the button’s function or option is on.
Battery Backup
An internal battery provides power to store your crossover
settings in case of AC power interruption.
Front Panel Controls 3
F PRONT ANEL ONTROLSC

Specyfikacje produktu

Marka: Martin Logan
Kategoria: nieskategoryzowany
Model: Exos

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Martin Logan Exos, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany Martin Logan

Martin Logan

Martin Logan Theater i Instrukcja

21 Września 2024
Martin Logan

Martin Logan Voyage Instrukcja

21 Września 2024
Martin Logan

Martin Logan Spire Instrukcja

21 Września 2024
Martin Logan

Martin Logan Script i Instrukcja

21 Września 2024
Martin Logan

Martin Logan Theos Instrukcja

21 Września 2024
Martin Logan

Martin Logan Stage Instrukcja

21 Września 2024
Martin Logan

Martin Logan Monolith II Instrukcja

21 Września 2024
Martin Logan

Martin Logan Helos 100 Instrukcja

21 Września 2024
Martin Logan

Martin Logan Ticket Instrukcja

21 Września 2024
Martin Logan

Martin Logan Summit Instrukcja

21 Września 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Meec Tools

Meec Tools 010-084 Instrukcja

6 Października 2024
Outwell

Outwell Scenic Road 250 Instrukcja

5 Października 2024
Impact

Impact Qualite QL-3560-LED Instrukcja

4 Października 2024
Impact

Impact QuikBalance Instrukcja

4 Października 2024
Impact

Impact CA-112 Instrukcja

4 Października 2024
Impact

Impact Forever Ready Cool FRC-24-LED Instrukcja

4 Października 2024
Impact

Impact LS-BHA Instrukcja

4 Października 2024
Impact

Impact LKB-5C Instrukcja

4 Października 2024
Impact

Impact Varipole Drop Ceiling Adapter Instrukcja

4 Października 2024
Impact

Impact RST-001 Instrukcja

4 Października 2024