Instrukcja obsługi Manitowoc UD-0190A


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Manitowoc UD-0190A (22 stron) w kategorii maszyna do produkcji lodów. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/22
Part Number: 04002909 Rev02 4/16
UnderCounter Ice Machines
Installation, Operation and Maintenance Manual
Safety Notices
Safety Notices
Read these precautions to prevent personal injury:
Read this manual thoroughly before operating,
installing or performing maintenance on the
equipment. Failure to follow instructions in this
manual can cause property damage, injury or death.
Routine adjustments and maintenance procedures
outlined in this manual are not covered by the
warranty.
Proper installation, care and maintenance are essential
for maximum performance and trouble-free operation
of your equipment.
Visit our website www.manitowocice.com for manual
updates, translations, or contact information for
service agents in your area.
This equipment contains high voltage electricity and
refrigerant charge. Installation and repairs are to be
performed by properly trained technicians aware of
the dangers of dealing with high voltage electricity
and refrigerant under pressure. The technician must
also be certified in proper refrigerant handling
and servicing procedures. All lockout and tag out
procedures must be followed when working on this
equipment.
This equipment is intended for indoor use only. Do
not install or operate this equipment in outdoor areas.
nWarning
Follow these electrical requirements during
installation of this equipment.
All field wiring must conform to all applicable
codes of the authority having jurisdiction. It is
the responsibility of the end user to provide the
disconnect means to satisfy local codes. Refer to rating
plate for proper voltage.
This appliance must be grounded.
This equipment must be positioned so that the plug is
accessible unless other means for disconnection from
the power supply (e.g., circuit breaker or disconnect
switch) is provided.
Check all wiring connections, including factory
terminals, before operation. Connections can become
loose during shipment and installation.
nWarning
Follow these precautions to prevent personal injury
during installation of this equipment:
Installation must comply with all applicable
equipment fire and health codes with the authority
having jurisdiction.
To avoid instability the installation area must be
capable of supporting the combined weight of the
equipment and product. Additionally the equipment
must be level side to side and front to back.
Remove all removable panels before lifting and
installing and use appropriate safety equipment
during installation and servicing. Two or more people
are required to lift or move this appliance to prevent
tipping and/or injury.
Do not damage the refrigeration circuit when
installing, maintaining or servicing the unit.
Connect to a potable water supply only.
This equipment contains refrigerant charge.
Installation of the line sets must be performed by
a properly trained and EPA certified refrigeration
technician aware of the dangers of dealing with
refrigerant charged equipment.
Legs or casters must be installed and the legs/casters
must be screwed in completely. When casters are
installed, the mass of this unit will allow it to move
uncontrolled on an inclined surface. These units must
be tethered/secured to comply with all applicable
codes. Swivel casters must be mounted on the front
and rigid casters must be mounted on the rear. Lock
the front casters after installation is complete.
Some 50 Hz models may contain up to 150 grams
of R290 (propane) refrigerant. R290 (propane)
is flammable in concentrations of air between
approximately 2.1% and 9.5% by volume (LEL lower
explosion limit and UEL upper explosion limit). An
ignition source at a temperature higher than 470°C is
needed for a combustion to occur. Refer to nameplate
to identify the type of refrigerant in your equipment.
Only trained and qualified personnel aware of the
dangers are allowed to work on the equipment.


Specyfikacje produktu

Marka: Manitowoc
Kategoria: maszyna do produkcji lodów
Model: UD-0190A
Kolor produktu: Czarny
Typ produktu: Notebook
Szerokość produktu: 412.6 mm
Głębokość produktu: 277 mm
Waga produktu: 3520 g
W zestawie pilot zdalnego sterowania: Tak
Podręcznik użytkownika: Tak
Szerokość opakowania: 450 mm
Wysokość opakowania: 345 mm
Głębokość opakowania: 160 mm
Certyfikat środowiskowy (zrównoważonego rozwoju): ENERGY STAR
Bluetooth: Nie
Wyjścia słuchawkowe: 2
Wtyk słuchawek: 3,5 mm
Zasilacz sieciowy: Tak
Kraj pochodzenia: Chiny
Typ HD: HD+
Technologia baterii: Litowo-jonowa (Li-Ion)
Długość przekątnej ekranu: 17.3 "
Obsługiwane typy kart pamięci: Memory Stick (MS),MMC,MS PRO,SD,xD
Prędkość transferu danych przez Ethernet LAN: 10,100,1000 Mbit/s
Ilość portów Ethernet LAN (RJ-45): 1
Zakres temperatur (eksploatacja): 0 - 35 °C
Zakres wilgotności względnej: 10 - 90 %
Układ: Muszla
Rozdzielczość: 1600 x 900 px
Natywne proporcje obrazu: 16:9
Ekran dotykowy: Nie
Taktowanie procesora: 2.1 GHz
Typ procesora: Intel® Pentium® (dwurdzeniowy)
Model procesora: T4300
Wi-Fi: Tak
Standardy Wi- Fi: 802.11b,802.11g
Liczba portów USB 2.0: 3
Przewodowa sieć LAN: Tak
Zintegrowany czytnik kart: Tak
Karta gwarancyjna: Tak
Typ portu ładowania: DC-in jack
Zakres temperatur (przechowywanie): -20 - 60 °C
Dopuszczalna wilgotność względna: 5 - 65 %
Producent procesora: Intel
Liczba rdzeni procesora: 2
Typ pamięci wewnętrznej: DDR3-SDRAM
Pamięć wewnętrzna: 4 GB
Zainstalowany system operacyjny: Windows 7 Home Premium
Maksymalna pojemność pamięci: 8 GB
Gniazdo procesora: Gniazdo 478
Ilość portów HDMI: 1
Port wyjścia S/PDIF: Nie
Mikrofon: Tak
Zawiera sterowniki: Tak
Przewód zasilający dołączony: Tak
Klawiatura numeryczna: Tak
Urządzenie wskazujące: Panel dotykowy
Kensington Lock: Tak
Liczba portów VGA (D-Sub): 1
Nośniki: HDD
Ilość wbudowanych glosników: 2
Producent głośników: Altec Lansing
Kamera przednia: Tak
Moc adaptera AC: 90 W
Dopuszczalna wysokość podczas eksploatacji (n.p.m.): -15 - 3048 m
Port DVI: Nie
Czas pracy na zasilaniu akumulatorowym: - h
Wbudowany mikrofon: Tak
Częstotliwość adaptera AC: 50 - 60 Hz
Napięcie wejściowe adaptera AC: 100 - 240 V
Klawisze Windows: Tak
Pełnowymiarowa klawiatura: Tak
Gniazda pamięci: 2x SO-DIMM
Gniazdo smartcard: Nie
Pojemność HDD: 500 GB
Szybkość HDD: 7200 RPM
Sieć danych: Nieobsługiwany
Całkowita pojemność przechowywania: 500 GB
Procesor ARK ID: 37253
Technologia Intel® Hyper Threading (Intel® HT Technology): Nie
Technologia Intel® Turbo Boost: Nie
Technologia Intel® Quick Sync Video: Nie
Technologia Intel® InTru™ 3D: Nie
Technologia Intel® Clear Video HD (Intel® CVT HD): Nie
Nowe instrukcje AES (Intel® AES-NI): Nie
Technologia Udoskonalona Intel SpeedStep: Tak
Technologia Intel® Trusted Execution: Nie
Intel® Enhanced Halt State: Nie
Intel® Clear Video Technology dla MID (Intel® CVT for MID): Nie
Intel® VT-x with Extended Page Tables (EPT): Nie
Intel® 64: Tak
Technologia Wirtualizacji Intel® (Directed I/O) (VT-d): Nie
Technologia Intel® Clear Video: Nie
Technologia virtualizacji Intel® (VT-x): Nie
Interfejs HDD: SATA
Typ pamięci procesora: L2
Cache procesora: 1 MB
Litografia procesora: 45 nm
Liczba wątków: 2
Tryb pracy procesora: 64-bit
Nazwa kodowa procesora: Penryn
Pamięć ECC wspierana przez procesor: Nie
Termiczny układ zasilania (TDP): 35 W
Bezkonfliktowy procesor: Nie
Stepping: R0
Kod procesora: SLGJM
Technologia Execute Disable Bit (EDB): Tak
Technologie Thermal Monitoring: Nie
Wbudowane opcje dostępne: Nie
Typ magistrali: FSB
Układ pamięci: 2 x 2 GB
Karta graficzna on-board: Nie
Model karty graficznej on-board: Niedostępny
Parytet FSB: Nie
Rozgałęźnik T: 105 °C
Magistrala systemowa: 800 Mhz
Seria procesora: Intel Pentium T4000 Series for Mobile
Model dedykowanej karty graficznej: AMD Mobility Radeon HD 4530
Intel® Wireless Display (Intel® WiDi): Nie
Technologia Intel® My WiFi (Intel® MWT): Nie
Technologia Intel® Anti-Theft (Intel® AT): Nie
Intel® Insider™: Nie
Technologia Intel® FDI: Nie
Intel® Flex Memory Access: Nie
Intel® Fast Memory Access: Nie
Intel® Demand Based Switching: Nie
Technologia Intel® Dual Display Capable: Nie
Intel® Rapid Storage Technology: Nie
Napędy optyczne: DVD Super Multi DL
Architektura systemu operacyjnego: 64-bit
Dopuszczalna wysokość (n.p.m.): -15 - 12192 m
Rodzaj pamięci: SO-DIMM
Dedykowana karta graficzna: Tak
Technologia LightScribe: Tak
Złącze dokowania: Tak
Obsluga ExpressCard: Tak
Typ gniazda cardbus pcmcia: Nie
Technologia Intel® Smart Connect: Nie
Technologia Intel® Rapid Start: Nie
Technologia Intel® Smart Response: Nie
Ilość komór baterii: 8
Liczba portów IEEE 1394/Firewire: 1
Pamięć adaptera dedykowanej karty graficznej: 0.512 GB
Współczynnik Magistrala/Rdzeń: 10.5
Maksymalna pamięć wewnętrzna (64-bit): 8 GB
Liczba zainstalowanych HDD: 1
liczba portów eSATA/USB 2.0: 1
Auto-wyczuwanie mocy: Tak
Wysokość (z przodu): 35 mm
Wysokość (z tyłu): 43.2 mm
Liczba przetwarzających tranzystorów: 410 M
Die Size przetwarzania: 107 mm²
WiMAX 4G: Nie

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Manitowoc UD-0190A, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje maszyna do produkcji lodów Manitowoc

Instrukcje maszyna do produkcji lodów

Najnowsze instrukcje dla maszyna do produkcji lodów