Instrukcja obsługi Manhattan 207362

Manhattan Niesklasyfikowane 207362

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Manhattan 207362 (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
HUM DEBUGGER
Hum Eliminator
Congratulations on your purchase of the Electro-Harmonix Hum Debugger, Hum
Eliminator pedal. No matter what type of pickups you use or how loud you play, the
E-H Hum Debugger will clean up your signal chain so that hum will no longer
overtake your guitar signal. Simply connect the Hum Debugger to your guitar like
you would any other effects pedal and you are ready to eliminate hum from your
sound forever!
-CONTROLS and I/O JACKS-
NORMAL/STRONG TOGGLE SWITCH Sets the amount of Hum Elimination. In –
NORMAL mode the Hum Debugger removes only the odd harmonics from the hum
present in your signal. In STRONG mode the Hum Debugger removes both odd and
even harmonics from your signal’s hum content.
STATUS LED – When the LED is lit the Hum Debugger is active. When the LED is off
the Hum Debugger is in True Bypass mode.
FOOTSWITCH – Toggles the Hum Debugger between active and True Bypass
modes.
CONNECTIONS Connect your instrument to the INPUT Jack. Connect your –
amplifier or the rest of your effects chain to the AMP Jack.
POWER Plug the barrel connector from the AC Adapter that came with your Hum –
Debugger into the power jack at the top of the Hum Debugger. Plug the AC Adapter
into a solid wall outlet. You must use the AC Adapter that the Hum Debugger came
with and the AC Adapter must have an output of 7.5VAC with the ability to supply at
least 200mA of current.
WARNING: Use only the 7.5VAC/400mA AC adapter the
Hum Debugger comes supplied with. Do not use any other
AC adapters. Using other AC adapters, even those made by
Electro-Harmonix, could cause harm to the unit, the
adapter or your drummer. The Hum Debugger does not
use batteries.
-USING THE HUM DEBUGGER-
The Electro-Harmonix Hum Debugger requires no special tricks necessary when to
remove hum. You can use it like you would any other effects pedal. The only thing to
remember is you must use the AC Adapter that the Hum Debugger comes supplied
with.
When using the Hum Debugger first set the toggle switch to NORMAL mode.
NORMAL mode should work well in most situations. If you find that the Hum
Debugger is still letting some hum through then move the switch up to STRONG
mode, this should remove the rest of the hum.
If you use more effects pedals than just the Hum Debugger we advise that the Hum
Debugger be inserted at the beginning of the effects chain.
- WARRANTY INFORMATION -
Please register online at http://www.ehx.com/product-registration or complete and
return the enclosed warranty card within 10 days of purchase. Electro-Harmonix will
repair or replace, at its discretion, a product that fails to operate due to defects in
materials or workmanship for a period of one year from date of purchase. This
applies only to original purchasers who have bought their product from an authorized
Electro-Harmonix retailer. Repaired or replaced units will then be warranted for the
unexpired portion of the original warranty term.
If you should need to return your unit for service within the warranty period, please
contact the appropriate office listed below. Customers outside the regions listed
below, please contact EHX Customer Service for information on warranty repairs at
info@ehx.com or +1- - -8300. USA and Canadian customers: please obtain a 718 937
Return Authorization Number (RA#) from EHX Customer Service before returning
your product. Include with your returned unit: a written description of the problem
as well as your name, address, telephone number, e-mail address, and RA#; and a
copy of your receipt clearly showing the purchase date.
United States & Canada
EHX CUSTOMER SERVICE
ELECTRO-HARMONIX
c/o NEW SENSOR CORP.
47-50 33RD STREET
LONG ISLAND CITY, NY 11101
Tel: 718- - 937 8300
Email: info@ehx.com
Europe
JOHN WILLIAMS
ELECTRO-HARMONIX UK
13 CWMDONKIN TERRACE
SWANSEA SA2 0 RQ
UNITED KINGDOM
Tel: +44 179 247 3258
Email: electroharmonixuk@virginmedia.com
This warranty gives a purchaser specific legal rights. A purchaser may have even
greater rights depending upon the laws of the jurisdiction within which the product
was purchased.
To hear demos on all EHX pedals visit us on the web at www.ehx.com
Email us at info@ehx.com

Specyfikacje produktu

Marka: Manhattan
Kategoria: Niesklasyfikowane
Model: 207362

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Manhattan 207362, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Manhattan

Manhattan

Manhattan 166669 Instrukcja

8 Października 2024
Manhattan

Manhattan 153973 Instrukcja

7 Października 2024
Manhattan

Manhattan 190299 Instrukcja

7 Października 2024
Manhattan

Manhattan 130721 Instrukcja

7 Października 2024
Manhattan

Manhattan 102605 Instrukcja

7 Października 2024
Manhattan

Manhattan 461245 Instrukcja

5 Października 2024
Manhattan

Manhattan 462242 Instrukcja

5 Października 2024
Manhattan

Manhattan 180979 Instrukcja

5 Października 2024
Manhattan

Manhattan 462358 Instrukcja

30 Września 2024
Manhattan

Manhattan 462419 Instrukcja

30 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024