Instrukcja obsługi Makita TL065DZ
Makita
Maszyna do śrub
TL065DZ
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita TL065DZ (12 stron) w kategorii Maszyna do śrub. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/12
INSTRUCTION MANUAL
Cordless Angle Impact Driver /
Cordless Angle Impact Wrench
TL064D / TL065D
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: TL064D
Fastening capacities Machine screw 4 mm - 8 mm
Standard bolt M4 - M12
High tensile bolt M4 - M8
No load speed 0 - 2,000 min-1
Impacts per minute 0 - 3,000 min-1
Maximum fastening torque 60 N•m
Overall length 361 mm - 380 mm
Rated voltage D.C. 10.8 V - 12 V max
Standard battery cartridge BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041B
Charger DC10SA / DC10SB / DC10WC / DC10WD
Net weight 1.2 - 1.6 kg
Model: TL065D
Fastening capacities Standard bolt M4 - M12
High tensile bolt M4 - M8
Square drive 9.5 mm
No load speed 0 - 2,000 min-1
Impacts per minute 0 - 3,000 min-1
Maximum fastening torque 60 N•m
Overall length 361 mm - 380 mm
Rated voltage D.C. 10.8 V - 12 V max
Standard battery cartridge BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041B
Charger DC10SA / DC10SB / DC10WC / DC10WD
Net weight 1.2 - 1.6 kg
• Due to our continuing program of research and development, the specications herein are subject to change
without notice.
• Specications and battery cartridge may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for screw driving in wood, metal
and plastic.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841:
Model TL064D
Sound pressure level (L
pA) : 91 dB(A)
Sound power level (L
WA) : 102 dB (A)
Uncertainty (K) : 3 dB(A)
Model TL065D
Sound pressure level (L
pA) : 90 dB(A)
Sound power level (L
WA) : 101 dB (A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
WARNING: Wear ear protection.
3 ENGLISH
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841:
Model TL064D
Work mode: impact tightening of fasteners of the maxi-
mum capacity of the tool
Vibration emission (a
h) : 15.0 m/s2
Uncertainty (K) : 1.5 m/s
2
Model TL065D
Work mode: impact tightening of fasteners of the maxi-
mum capacity of the tool
Vibration emission (a
h) : 18.0 m/s2
Uncertainty (K) : 1.5 m/s
2
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
WARNING: The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and specications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, re and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
7. Power tools can produce electromagnetic
elds (EMF) that are not harmful to the user.
However, users of pacemakers and other similar
medical devices should contact the maker of their
device and/or doctor for advice before operating
this power tool.
Personal Safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the inuence of drugs, alcohol or med-
ication. A moment of inattention while operating
power tools may result in serious personal injury.
2. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
will reduce personal injuries.
3. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your nger on the switch or energising power tools
that have the switch on invites accidents.
4. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
5. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
Specyfikacje produktu
| Marka: | Makita |
| Kategoria: | Maszyna do śrub |
| Model: | TL065DZ |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Makita TL065DZ, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Maszyna do śrub Makita
22 Grudnia 2024
22 Grudnia 2024
22 Grudnia 2024
12 Października 2024
5 Października 2024
4 Października 2024
4 Października 2024
2 Października 2024
1 Października 2024
27 Września 2024
Instrukcje Maszyna do śrub
- Maszyna do śrub AEG
- Maszyna do śrub Worx
- Maszyna do śrub Kawasaki
- Maszyna do śrub Milwaukee
- Maszyna do śrub Bosch
- Maszyna do śrub Yato
- Maszyna do śrub Parkside
- Maszyna do śrub Toolcraft
- Maszyna do śrub Festool
- Maszyna do śrub Panasonic
- Maszyna do śrub StarTech.com
- Maszyna do śrub Bavaria By Einhell
- Maszyna do śrub SW-Stahl
- Maszyna do śrub Stanley
- Maszyna do śrub Black & Decker
- Maszyna do śrub Hazet
- Maszyna do śrub DeWalt
- Maszyna do śrub Einhell
- Maszyna do śrub Genesis
- Maszyna do śrub Silverline
- Maszyna do śrub Ozito
- Maszyna do śrub Fuxtec
- Maszyna do śrub RYOBI
- Maszyna do śrub Chicago Pneumatic
- Maszyna do śrub Chamberlain
- Maszyna do śrub GO/ON
- Maszyna do śrub DEDRA
- Maszyna do śrub Biltema
- Maszyna do śrub Hilti
- Maszyna do śrub Emos
- Maszyna do śrub Rodcraft
- Maszyna do śrub BaseTech
- Maszyna do śrub Trotec
- Maszyna do śrub Dremel
- Maszyna do śrub Velleman
- Maszyna do śrub Meec Tools
- Maszyna do śrub Güde
- Maszyna do śrub Bavaria
- Maszyna do śrub Mafell
- Maszyna do śrub Westfalia
- Maszyna do śrub Carrera
- Maszyna do śrub Beta
- Maszyna do śrub Omega
- Maszyna do śrub Fein
- Maszyna do śrub Ferm
- Maszyna do śrub Hitachi
- Maszyna do śrub Craftsman
- Maszyna do śrub Matrix
- Maszyna do śrub Fieldmann
- Maszyna do śrub PowerPlus
- Maszyna do śrub Alpha Tools
- Maszyna do śrub Vonroc
- Maszyna do śrub Powerfix
- Maszyna do śrub HiKOKI
- Maszyna do śrub EasyMaxx
- Maszyna do śrub Wiha
- Maszyna do śrub Porter-Cable
- Maszyna do śrub Metabo
- Maszyna do śrub Cotech
- Maszyna do śrub Skil
- Maszyna do śrub Pansam
- Maszyna do śrub Toolland
- Maszyna do śrub Tacklife
- Maszyna do śrub Senco
- Maszyna do śrub Maktec
- Maszyna do śrub Steren
- Maszyna do śrub Power Craft
- Maszyna do śrub Kraftwerk
- Maszyna do śrub Kress
- Maszyna do śrub Urrea
- Maszyna do śrub Truper
- Maszyna do śrub Bruder Mannesmann
- Maszyna do śrub Meister Craft
- Maszyna do śrub Batavia
- Maszyna do śrub Black Decker
- Maszyna do śrub Elu
- Maszyna do śrub Sthor
- Maszyna do śrub Gedore
- Maszyna do śrub Cleco
- Maszyna do śrub MSW
- Maszyna do śrub Einhell Bavaria
- Maszyna do śrub Wera
- Maszyna do śrub Ingersoll Rand
- Maszyna do śrub Prowork
- Maszyna do śrub Facom
- Maszyna do śrub TAURUS Titanium
- Maszyna do śrub Total
- Maszyna do śrub Netter Vibration
Najnowsze instrukcje dla Maszyna do śrub
13 Stycznia 2025
12 Stycznia 2025
11 Stycznia 2025
10 Stycznia 2025
4 Stycznia 2025
4 Stycznia 2025
3 Stycznia 2025
1 Stycznia 2025
1 Stycznia 2025
1 Stycznia 2025