Instrukcja obsługi Makita LXSF01Z

Makita Wiertarka LXSF01Z

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita LXSF01Z (24 stron) w kategorii Wiertarka. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/24
1
INSTRUCTION MANUAL
MANUEL D'INSTRUCTION
MANUAL DE INSTRUCCIONES
IMPORTANT: Read Before Using.
IMPORTANT: Lire avant usage.
IMPORTANTE: Leer antes de usar.
Cordless Screwdriver
Visseuse sans Fil
Atornillador Inalámbrico
LXSF01
LXSF02
011811
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model LXSF01 LXSF02
Capacities Drywall screw 4 mm (5/32") 4 mm (5/32")
No load speed (RPM) 0 - 4,000 /min 0 - 4,000 /min
With short locator 281 mm (11-1/8") 281 mm (11-1/8")
Overall length With long locator 296 mm (11-5/8") 296 mm (11-5/8")
Net weight 1.5 kg (3.3 lbs) 1.4 kg (3.2 lbs)
Rated voltage D.C. 18 V D.C. 14.4 V
Standard battery cartridges BL1815, BL1830 BL1415, BL1430
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
GEA006-2
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of an
GFCI reduces the risk of electric shock.
Personal Safety
10. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
11. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
12. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your finger on the switch or energising power tools
that have the switch on invites accidents.
13. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
14. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
3
15. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing, and gloves
away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving
parts.
16. If devices are provided for the connection of
dust extraction and collection facilities,
ensure these are connected and properly used.
Use of dust collection can reduce dust-related
hazards.
Power tool use and care
17. Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
18. Do not use the power tool if the switch does
not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
19. Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
20. Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are
dangerous in the hands of untrained users.
21. Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
22. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
23. Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the power
tool for operations different from those intended
could result in a hazardous situation.
Battery tool use and care
24. Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
25. Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
26. When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery
terminals together may cause burns or a fire.
27. Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water.
If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may
cause irritation or burns.
Service
28. Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
29. Follow instruction for lubricating and
changing accessories.
30. Keep handles dry, clean and free from oil and
grease.
GEB050-2
CORDLESS SCREWDRIVER
SAFETY WARNINGS
1. Hold power tool by insulated gripping
surfaces, when performing an operation
where the fastener may contact hidden wiring.
Fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
2. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
3. Hold the tool firmly.
4. Keep hands away from rotating parts.
5. Do not touch the bit or the workpiece
immediately after operation; they may be
extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this
instruction manual may cause serious personal
injury.


Specyfikacje produktu

Marka: Makita
Kategoria: Wiertarka
Model: LXSF01Z
Kolor produktu: Black,Red
Typ produktu: Notebook
Wysokość produktu: 25.6 mm
Szerokość produktu: 302 mm
Głębokość produktu: 200 mm
Waga produktu: 1240 g
Bluetooth: Nie
Zasilacz sieciowy: Tak
Typ HD: HD
Pojemność baterii: 3300 mAh
Długość przekątnej ekranu: 11.6 "
Obsługiwane typy kart pamięci: MMC,SD,SDHC,SDXC
Prędkość transferu danych przez Ethernet LAN: 10,100 Mbit/s
Ilość portów Ethernet LAN (RJ-45): 1
Układ: Muszla
Rozdzielczość: 1366 x 768 px
Natywne proporcje obrazu: 16:9
Ekran dotykowy: Nie
Taktowanie procesora: 1.7 GHz
Typ procesora: Intel® Core™ i3
Model procesora: i3-4010U
Wi-Fi: Tak
Standardy Wi- Fi: 802.11b,802.11g,Wi-Fi 4 (802.11n)
Liczba portów USB 2.0: 2
Przewodowa sieć LAN: Tak
Zintegrowany czytnik kart: Tak
Typ portu ładowania: DC-in jack
Podstawowy standard Wi-Fi: Wi-Fi 4 (802.11n)
Producent procesora: Intel
Liczba rdzeni procesora: 2
Typ pamięci wewnętrznej: DDR3-SDRAM
Pamięć wewnętrzna: 4 GB
Ilość portów USB 3.2 Gen 1 (3.1 Gen 1) Typu-A: 1
Zainstalowany system operacyjny: Windows 8
Maksymalna pojemność pamięci: 4 GB
Gniazdo procesora: BGA 1168
Ilość złączy SATA III: 4
Ilość portów HDMI: 1
Port wyjścia S/PDIF: Nie
Mikrofon: Nie
Łączna liczba złączy SATA: 4
Klawiatura numeryczna: Nie
Urządzenie wskazujące: Panel dotykowy
Kensington Lock: Nie
Liczba portów VGA (D-Sub): 1
Nośniki: HDD
System dźwięku: SonicMaster
Kamera przednia: Tak
Moc adaptera AC: 33 W
Prąd wyjściowy adaptera AC: 1.75 A
Napięcie wyjściowe adaptera AC: 19 V
Port DVI: Nie
Czas pracy na zasilaniu akumulatorowym: - h
Wbudowany mikrofon: Tak
Podświetlenie LED: Tak
Częstotliwość adaptera AC: 50 - 60 Hz
Napięcie wejściowe adaptera AC: 100 - 240 V
Gniazdo smartcard: Nie
Pojemność HDD: 500 GB
Szybkość HDD: 5400 RPM
Rozmiar HDD: 2.5 "
Całkowita pojemność przechowywania: 500 GB
Procesor ARK ID: 75107
Technologia Intel® Hyper Threading (Intel® HT Technology): Tak
Technologia Intel® Turbo Boost: Nie
Technologia Intel® Quick Sync Video: Tak
Technologia Intel® InTru™ 3D: Tak
Technologia Intel® Clear Video HD (Intel® CVT HD): Tak
Nowe instrukcje AES (Intel® AES-NI): Tak
Technologia Udoskonalona Intel SpeedStep: Tak
Technologia Intel® Trusted Execution: Nie
Maksymalna konfiguracja CPU: 1
Intel® Enhanced Halt State: Tak
Intel® Clear Video Technology dla MID (Intel® CVT for MID): Nie
Intel® VT-x with Extended Page Tables (EPT): Tak
Intel® TSX-NI: Nie
Intel® Secure Key: Tak
Intel® 64: Tak
Technologia Wirtualizacji Intel® (Directed I/O) (VT-d): Tak
Technologia Intel® Clear Video: Nie
Wersja technologii Intel® Secure Key: 1.00
Technologia virtualizacji Intel® (VT-x): Tak
Wersja Intel® TSX-NI: 0.00
Interfejs HDD: SATA
Typ pamięci procesora: Smart Cache
Cache procesora: 3 MB
Wskaźnik magistrali systemowej: 5 GT/s
Litografia procesora: 22 nm
Liczba wątków: 4
Tryb pracy procesora: 64-bit
Nazwa kodowa procesora: Haswell
Pamięć ECC wspierana przez procesor: Nie
Maksymalna liczba linii PCI Express: 12
Konfiguracje PCI Express: 2x4,4x1
Termiczny układ zasilania (TDP): 15 W
Bezkonfliktowy procesor: Tak
Stepping: C0
Instrukcje obsługiwania: AVX 2.0,SSE4.1,SSE4.2
Kod procesora: SSSR16Q
Technologia Execute Disable Bit (EDB): Tak
Stan spoczynku: Tak
Technologie Thermal Monitoring: Tak
Wbudowane opcje dostępne: Tak
Typ magistrali: DMI2
Wielkość opakowania procesora: 40 x 24 x 1.5 mm
Prędkość zegara pamięci: 1333 Mhz
Karta graficzna on-board: Tak
Model karty graficznej on-board: Intel® HD Graphics 4400
Wersja gniazd typu Slot (PCI Express): 2.0
Parytet FSB: Nie
Rozgałęźnik T: 100 °C
Magistrala systemowa: - Mhz
Seria procesora: Intel® Core ™ i3-4000 Seria Mobile
Generowanie procesora: Intel® Core™ i3 czwartej generacji
Wbudowana bazowa częstotliwość procesora: 200 Mhz
Dynamiczne taktowanie wbudowanej karty graficznej (max): 1000 Mhz
Maksymalna pamięć wbudowanej karty graficznej: 2 GB
Wbudowana karta graficzna wersja DirectX: 11.2/12
Wbudowana karta graficzna wersja OpenGL: 4.3
Model dedykowanej karty graficznej: Niedostępny
ID wbudowanego urządzenia graficznego: 0xA16
Typ zintegrowanej karty graficznej: Intel® HD Graphics
Intel® Small Business Advantage (Intel® SBA): Tak
Intel® Wireless Display (Intel® WiDi): Tak
Technologia Intel® My WiFi (Intel® MWT): Tak
Technologia Intel® Identity Protection (Intel® IPT): Tak
Technologia Intel® Anti-Theft (Intel® AT): Tak
Intel® Insider™: Tak
Technologia Intel® FDI: Nie
Intel® Flex Memory Access: Nie
Intel® Fast Memory Access: Nie
Intel® Demand Based Switching: Nie
Intel® Small Business Advantage (SBA) wersja: 1.00
Technologia Intel® Dual Display Capable: Nie
Intel® Rapid Storage Technology: Tak
Wersja technologii Intel® Identity Protection: 1.00
Napędy optyczne: Nie
Port dla zestaw słuchawka/mikrofon: Tak
Dedykowana karta graficzna: Nie
Technologia LightScribe: Nie
Złącze dokowania: Nie
Obsluga ExpressCard: Nie
Typ gniazda cardbus pcmcia: Nie
Technologia Intel® Smart Connect: Tak
Technologia Intel® Smart Response: Tak
Intel® Matrix Storage Technology (Intel® MST): Nie
Intel HD Audio Technology: Tak
Wersja Intel® Smart Connect Technology: 1.00
Wersja technologii Intel® Smart Response: 1.00
Wersja oprogramowania Intel® ME: 9.5
Ilość komór baterii: 3
Technologia Intel® Virtualization (Intel® VT): VT-d,VT-i
Liczba zainstalowanych HDD: 1
UART: Tak

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Makita LXSF01Z, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Wiertarka Makita

Makita

Makita HR2631FTX4 Instrukcja

12 Stycznia 2025
Makita

Makita HR4002 Instrukcja

22 Grudnia 2024
Makita

Makita DDF459 Instrukcja

22 Grudnia 2024
Makita

Makita HP2070 Instrukcja

13 Października 2024
Makita

Makita DHR263ZJ Instrukcja

12 Października 2024
Makita

Makita DDA350RFJ Instrukcja

7 Października 2024
Makita

Makita HP332D Instrukcja

7 Października 2024
Makita

Makita M6501 Instrukcja

6 Października 2024
Makita

Makita DDF485RTJ Instrukcja

6 Października 2024
Makita

Makita DX10 Instrukcja

5 Października 2024

Instrukcje Wiertarka

Najnowsze instrukcje dla Wiertarka

DeWalt

DeWalt dc987ka Instrukcja

15 Stycznia 2025
Bavaria

Bavaria BCD 12/1 Instrukcja

11 Stycznia 2025
MSW

MSW -DDM255 Instrukcja

10 Stycznia 2025
MSW

MSW -DDM152 Instrukcja

10 Stycznia 2025
MSW

MSW -DDM205 Instrukcja

10 Stycznia 2025
MSW

MSW -DDM230 Instrukcja

10 Stycznia 2025