Instrukcja obsługi Makita LS1216

Makita Maszyna do piłowania LS1216

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita LS1216 (28 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/28

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Slide Compound Miter Saw

LS1216

LS1216L

LS1216F

LS1216FL

010049

ENGLISH (Original instructions)

SPECIFICATIONS

Model LS1216/ LS1216L/ LS1216F/ LS1216FL

Blade diameter 305 mm

Blade body thickness 1.6 mm - 2.4 mm

Hole diameter European countries: 30 mm, other than European countries: 25.4 mm

Max. Miter angle Left 52° , Right 60°

Max. Bevel angle Left and Right 45°

Max. Cutting capacities (H x W)

Bevel angle

Miter angle 45°(left) 0° 45°(right)

0° 59mm×382mm 87mm×382mm 44mm×382mm

69mm×363mm 102mm×363mm 54mm×363mm

35mm 78mm×290 mm 115mm×300mm 61mm×290mm

Thickness of wood facing on guide

fence for increased height of cut 60mm ― 120mm×250mm ―

45°(left and right) 59mm×268mm 87mm×268mm 44mm×268mm

69mm×255mm 102mm×255mm 54mm×255mm

30mm ― 115mm×202mm ―

Thickness of wood facing on guide

fence for increased height of cut 45mm ― 120mm×172mm ―

52°(left and right) ― 87mm×233mm ―

― 102mm×220mm ―

25mm ― 115mm×178mm ―

Thickness of wood facing on guide

fence for increased height of cut 35mm ― 120mm×155mm ―

60°(right) ― 87mm×185mm ―

― 102mm×178mm ―

25mm ― 115mm×140mm ―

Thickness of wood facing on guide

fence for increased height of cut 35mm ― 120mm×122mm ―

Special Max. Cutting capacities

Crown molding 45°type

(with Crown molding stopper used) 203 mm

Base board (H)

(with Horizontal vise used) 165 mm

Special Max Width Cutting Capacities

(with 38 mm (1-1/2") thick platform used)

Bevel angle Miter angle Max. cutting

0° 416 mm

0° 45° (Left and right) 292 mm

Refer to OPERATION for the cutting procedure.

No load speed (min

-1 ) 3,200

Laser Type (LS1216L,LS1216FL only) Red Laser 650 nm, 1.6mW ( Laser Class 2M )

Dimensions (L x W x H) 806 mm x 640 mm x 721 mm

Net weight

For all countries other than European countries

LS1216…26.3 kg

LS1216L/LS1216F …26.4 kg

LS1216FL …26.5 kg

For European countries

LS1216…26.5 kg

LS1216L/LS1216F …26.6 kg

LS1216FL …26.7 kg

Safety class /II

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Note: Specifications may differ from country to country.

• Weight according to EPTA-Procedure 1/2003

END210-6

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ To avoid injury from flying debris, keep

holding the saw head down, after

making cuts, until the blade has come

to a complete stop.

･ When performing slide cut, first pull

carriage fully and press down handle,

then push carriage toward the guide

fence.

･ Do not place hand or fingers close to

the blade.

･ Never look into the laser beam. Direct

laser beam may injure your eyes.

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE006-1

Intended use

The tool is intended for accurate straight and miter

cutting in wood. With appropriate saw blades, aluminum

can also be sawed.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined

according to EN61029:

Sound pressure level (L

pA) : 91 dB(A)

Sound power level (L

WA) : 100 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN61029:

Vibration emission (ah) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

Specyfikacje produktu

Marka:	Makita
Kategoria:	Maszyna do piłowania
Model:	LS1216
Kolor produktu:	Czarny
Rodzaj zasilania:	AC,Battery
Wbudowany wyświetlacz:	Tak
Typ wyświetlacza:	LCD
Wysokość produktu:	189 mm
Szerokość produktu:	116 mm
Głębokość produktu:	82 mm
Waga produktu:	680 g
Technologia łączności:	Przewodowy i Bezprzewodowy
Bluetooth:	Tak
Profile Bluetooth:	OPP,SPP
Wersja Bluetooth:	2.1+EDR
Port USB:	Tak
Technologia baterii:	Litowo-jonowa (Li-Ion)
Długość przekątnej ekranu:	3.3 "
Wielkość pamięci flash:	32 MB
Pojemność pamięci wewnętrznej:	32 MB
Wi-Fi:	Tak
Standardy Wi- Fi:	802.11b,802.11g,Wi-Fi 4 (802.11n)
Skrócona instrukcja obsługi:	Tak
Kod zharmonizowanego systemu (HS):	84433210
Liczba portów USB 2.0:	1
Przewodowa sieć LAN:	Nie
Rodzaj baterii:	PA-BT-001-B
Diody LED:	Tak
Model:	Drukarek mobilnych
Maksymalna rozdzielczość:	203 x 200 DPI
Maksymalna szerokość drukowania:	80 mm
Technologia druku:	bezpośrednio termiczny
Prędkość druku:	127 mm/s
Wbudowane kody kreskowe:	GS1 DataBar Expanded,CODABAR (NW-7),Code 128 (A/B/C),Code 39,Code 93,Data Matrix,EAN128,EAN13,EAN8,GS1 DataBar,GS1 DataBar Limited,GS1-128,ITF-25,MaxiCode,Micro QR Code,MicroPDF417,PDF417,POSTNET,QR Code,UPC-A,UPC-E
Języki opisu strony:	ESC P,ZPL II
Ładowanie akumulatora:	Tak
Maksymalna średnica rolki:	66 mm
Stopień ochrony IP:	IP54
Typ zasilacza:	Prąd przemienny
Dołączone oprogramowanie:	SDK (Software Development Kit)
Standardowe interfejsy:	Bluetooth,USB 1.1,USB 2.0,Wireless LAN
Wi-Fi Direct:	Tak
Maksymalna wysokość druku:	72 mm
Maksymalna długość nośników:	1000 mm