Instrukcja obsługi Makita HR3012FCJ
Makita
maszyna wiertnicza
HR3012FCJ
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita HR3012FCJ (20 stron) w kategorii maszyna wiertnicza. Ta instrukcja była pomocna dla 18 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/20
INSTRUCTION MANUAL
Combination Hammer
HR3011FC
HR3012FC
HR3001C
ENGLISH: Original instructions
DOUBLE INSULATION
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: HR3011FC HR3012FC HR3001C
Capacities Concrete 30 mm
Core bit 80 mm
Diamond core bit (dry type) 80 mm
Steel 13 mm
Wood 32 mm
No load speed 0 - 840 min-1
Blows per minute 0 - 4,500 min-1
Overall length 369 mm 386 mm 369 mm
Net weight 4.4 - 4.8 kg 4.5 - 4.7 kg 4.1 - 4.5 kg
Safety class /II
Optional accessory
Model: DX10 (For HR3011FC) DX11 (For HR3012FC)
Applicable workpiece and workmode for concrete drilling only
(not for metal or wood, and not for core drilling or chiseling)
Suction performance 0.35 l/min
Operating stroke Up to 190 mm
Suitable drill bit Up to 265 mm
Net weight 1.2 kg
•
Due to our continuing program of research and development, the specications herein are subject to change without notice.
• Specications may dier from country to country.
• The weight may dier depending on the attachment(s). The lightest and heaviest combination, according to
EPTA-Procedure 01/2014, are shown in the table.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
DOUBLE INSULATION
Only for EU countries
Do not dispose of electric equipment
together with household waste material! In
observance of the European Directive, on
Waste Electric and Electronic Equipment
and its implementation in accordance with
national law, electric equipment that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745-2-6:
Model HR3011FC
Sound pressure level (L
pA) : 94 dB(A)
Sound power level (L
WA) : 105 dB (A)
Uncertainty (K) : 3 dB(A)
Model HR3012FC
Sound pressure level (L
pA) : 93 dB(A)
Sound power level (L
WA) : 104 dB (A)
Uncertainty (K) : 3 dB(A)
Model HR3001C
Sound pressure level (L
pA) : 94 dB(A)
Sound power level (L
WA) : 105 dB (A)
Uncertainty (K) : 3 dB(A)
Model HR3011FC with DX10
Sound pressure level (L
pA) : 96 dB(A)
Sound power level (L
WA) : 107 dB (A)
Uncertainty (K) : 3 dB(A)
Model HR3012FC with DX11
Sound pressure level (L
pA) : 94 dB(A)
Sound power level (L
WA) : 105 dB (A)
Uncertainty (K) : 3 dB(A)
3 ENGLISH
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual
use of the power tool can dier from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o and when it is running idle in addition to the
trigger time).
Vibration
The following table shows the vibration total value
(tri-axial vector sum) determined according to applica-
ble standard.
Model HR3011FC
Work mode Vibration
emission
Uncertainty (K)
Applicable
standard
Hammer
drilling into
concrete
(ah, HD )
9.5 m/s21.5 m/s2EN60745-2-6
Hammer
drilling into
concrete with
DX10 (ah, HD)
9.5 m/s21.5 m/s2EN60745-2-6
Chiselling func-
tion with side
grip (a
h, Cheq )
6.0 m/s21.5 m/s2EN60745-2-6
Drilling into
metal (ah, D)
5.5 m/s21.5 m/s2EN62841-2-1
Model HR3012FC
Work mode Vibration
emission
Uncertainty (K)
Applicable
standard
Hammer
drilling into
concrete
(ah, HD )
9.5 m/s21.5 m/s2EN60745-2-6
Hammer
drilling into
concrete with
DX11 (ah, HD)
8.0 m/s21.5 m/s2EN60745-2-6
Chiselling func-
tion with side
grip (a
h, Cheq )
5.5 m/s21.5 m/s2EN60745-2-6
Drilling into
metal (ah, D)
6.0 m/s21.5 m/s2EN62841-2-1
Model HR3001C
Work mode Vibration
emission
Uncertainty (K)
Applicable
standard
Hammer
drilling into
concrete
(ah, HD)
13.5 m/s21.5 m/s2EN60745-2-6
Chiselling func-
tion with side
grip (a
h, Cheq )
11.0 m/s21.5 m/s2EN60745-2-6
Drilling into
metal (ah, D)
6.0 m/s21.5 m/s2EN62841-2-1
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual
use of the power tool can dier from the declared val-
ue(s) depending on the ways in which the tool is used
especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
as the times when the tool is switched o and when
it is running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and specications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, re and/or serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Specyfikacje produktu
| Marka: | Makita |
| Kategoria: | maszyna wiertnicza |
| Model: | HR3012FCJ |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Makita HR3012FCJ, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje maszyna wiertnicza Makita
29 Maja 2024
27 Maja 2024
24 Maja 2024
21 Maja 2024
20 Maja 2024
18 Maja 2024
18 Maja 2024
16 Maja 2024
16 Maja 2024
16 Maja 2024
Instrukcje maszyna wiertnicza
- maszyna wiertnicza Worx
- maszyna wiertnicza Milwaukee
- maszyna wiertnicza Bosch
- maszyna wiertnicza Parkside
- maszyna wiertnicza Festool
- maszyna wiertnicza Stanley
- maszyna wiertnicza Black & Decker
- maszyna wiertnicza DeWalt
- maszyna wiertnicza Einhell
- maszyna wiertnicza Silverline
- maszyna wiertnicza Ozito
- maszyna wiertnicza RYOBI
- maszyna wiertnicza DEDRA
- maszyna wiertnicza Baumr-AG
- maszyna wiertnicza Hilti
- maszyna wiertnicza Dremel
- maszyna wiertnicza Velleman
- maszyna wiertnicza Meec Tools
- maszyna wiertnicza Güde
- maszyna wiertnicza Zipper
- maszyna wiertnicza McKenzie
- maszyna wiertnicza Ferm
- maszyna wiertnicza Hitachi
- maszyna wiertnicza Craftsman
- maszyna wiertnicza Ridgid
- maszyna wiertnicza HiKOKI
- maszyna wiertnicza Metabo
- maszyna wiertnicza C-Power
- maszyna wiertnicza Skil
- maszyna wiertnicza Pansam
- maszyna wiertnicza Luxor
- maszyna wiertnicza Kress
Najnowsze instrukcje dla maszyna wiertnicza
6 Października 2024
28 Września 2024
28 Września 2024
24 Września 2024
17 Września 2024
17 Września 2024
12 Września 2024
12 Września 2024
12 Września 2024
12 Września 2024