Instrukcja obsługi Makita HR2630T

Makita Wiertarka HR2630T

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita HR2630T (16 stron) w kategorii Wiertarka. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
IMPORTANT: Read Before Using.
Combination Hammer
HR2631F
HR2631FT
HR2641
HR2320T
HR2630
HR2630T
015335
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model HR2631F
HR2631FT
HR2641 HR2320T HR2630 HR2630T
Concrete 26 mm 23 mm 26 mm
Core bit 68 mm
Diamond core bit (dry type)
80 mm 70 mm 80 mm
Steel 13 mm
Capacities
Wood 32 mm
No load speed 0 - 1,200 min
-1 0 - 1,100
min-1 0 - 1,200 min
-1
Blows per minute 0 - 4,600 min
-1 0 - 4,500
min-1 0 - 4,600 min
-1
Overall length 361 mm 385 mm 422 mm 380 mm 361 mm 385 mm
Net weight 2.9 kg 3.1 kg 2.9 kg 2.8 kg 3.0 kg
Safety class /II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END201-7
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ DOUBLE INSULATION
･ Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of the European
Directive, on Waste Electric and
Electronic Equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE042-1
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Model HR2631F, HR2631FT, HR2641
Sound pressure level (L
pA) : 90 dB (A)
Sound power level (L
WA) : 101 dB (A)
Uncertainty (K) : 3 dB (A)
Model HR2320T, HR2630, HR2630T
Sound pressure level (L
pA) : 91 dB (A)
Sound power level (L
WA) : 102 dB (A)
Uncertainty (K) : 3 dB (A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Model HR2631F
Work mode : hammer drilling into concrete
Vibration emission (ah,HD) : 12.0 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode : chiselling function with side grip
Vibration emission (ah,Cheq
) : 9.0 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: drilling into metal
Vibration emission (ah,D) : 2.5 m/s
2 or less
Uncertainty (K) : 1.5 m/s2
3
Model HR2631FT
Work mode : hammer drilling into concrete
Vibration emission (ah,HD) : 11.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode : chiselling function with side grip
Vibration emission (ah,Cheq) : 8.5 m/s
2
Uncertainty (K) : 1.5 m/s2
Work mode: drilling into metal
Vibration emission (ah,D) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
Model HR2641
Work mode : hammer drilling into concrete
Vibration emission (ah,HD) : 11.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode : chiselling function with side grip
Vibration emission (ah,Cheq) : 9.0 m/s
2
Uncertainty (K) : 1.5 m/s2
Work mode: drilling into metal
Vibration emission (ah,D) : 2.5 m/s2
Uncertainty (K) : 1.5 m/s2
Model HR2320T
Work mode : hammer drilling into concrete
Vibration emission (ah,HD) : 15.5 m/s
2
Uncertainty (K) : 1.5 m/s2
Work mode : chiselling function with side grip
Vibration emission (ah,Cheq) : 10.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: drilling into metal
Vibration emission (ah,D) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
Model HR2630
Work mode : hammer drilling into concrete
Vibration emission (ah,HD) : 15.5 m/s
2
Uncertainty (K) : 1.5 m/s2
Work mode : chiselling function with side grip
Vibration emission (ah,Cheq) : 9.5 m/s
2
Uncertainty (K) : 1.5 m/s2
Work mode: drilling into metal
Vibration emission (ah,D) : 2.5 m/s2
Uncertainty (K) : 1.5 m/s2
Model HR2630T
Work mode : hammer drilling into concrete
Vibration emission (ah,HD) : 15.0 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode : chiselling function with side grip
Vibration emission (ah,Cheq) : 9.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: drilling into metal
Vibration emission (ah,D) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-18
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Combination Hammer
Model No./ Type: HR2631F, HR2631FT, HR2641,
HR2320T, HR2630, HR2630T
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN60745
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

Specyfikacje produktu

Marka: Makita
Kategoria: Wiertarka
Model: HR2630T

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Makita HR2630T, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Wiertarka Makita

Makita

Makita HP2070 Instrukcja

13 Października 2024
Makita

Makita DHR263ZJ Instrukcja

12 Października 2024
Makita

Makita DDA350RFJ Instrukcja

7 Października 2024
Makita

Makita HP332D Instrukcja

7 Października 2024
Makita

Makita M6501 Instrukcja

6 Października 2024
Makita

Makita DDF485RTJ Instrukcja

6 Października 2024
Makita

Makita DX10 Instrukcja

5 Października 2024
Makita

Makita DX12 Instrukcja

5 Października 2024
Makita

Makita DDF453SFE Instrukcja

2 Października 2024
Makita

Makita 8434DWFE Instrukcja

1 Października 2024

Instrukcje Wiertarka

Najnowsze instrukcje dla Wiertarka

Ozito

Ozito BDP-500 Instrukcja

15 Października 2024
Einhell

Einhell BM-G1100 E Instrukcja

14 Października 2024
Sun Joe

Sun Joe 24V-DDK-LTX-PNK Instrukcja

14 Października 2024
DeWalt

DeWalt DWD450 Instrukcja

14 Października 2024
Black & Decker

Black & Decker GC1800 Instrukcja

13 Października 2024
Rupes

Rupes BH 252R Instrukcja

13 Października 2024
Black & Decker

Black & Decker BDCDE120 Instrukcja

10 Października 2024
Gamma

Gamma BH-1500W Instrukcja

9 Października 2024
Flex

Flex IW 1/2" 1500 18-EC Instrukcja

9 Października 2024
Tryton

Tryton TDW900A Instrukcja

9 Października 2024