Instrukcja obsługi Makita HP1641FJ

Makita maszyna wiertnicza HP1641FJ

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita HP1641FJ (36 stron) w kategorii maszyna wiertnicza. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/36

GB Hammer Drill INSTRUCTION MANUAL

S Slagborrmaskin BRUKSANVISNING

N Borhammer BRUKSANVISNING

FIN Iskuporakone KÄYTTÖOHJE

LV Triecienurbjmašīna LIETOŠANAS INSTRUKCIJA

LT Smūginis gręžtuvas NAUDOJIMO INSTRUKCIJA

EE Lööktrell KASUTUSJUHEND

RUS Ударная дрель

РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ

HP1640

HP1640F

HP1641

HP1641F

1 009238

2 009245

3 009239

4 009240

5 009241

6 009242

7 009246

8 009243 9 009244

10 001302

ENGLISH (Original instructions)

Explanation of general view

1-1. Switch trigger

1-2. Lock button

2-1. Lamp

3-1. Reversing switch

4-1. Action mode changing lever

5-1. Side grip

6-1. Chuck key

7-1. Sleeve

7-2. Ring

8-1. Depth gauge

8-2. Side grip

8-3. Grip base

10-1. Blow-out bulb

SPECIFICATIONS

Model HP1640/HP1640F/HP1641/HP1641F

Concrete 16 mm

Steel 13 mm Capacities

Wood 30 mm

No load speed (min

-1) 0 - 2,800

Blows per minute 0 - 44,800

Overall length 303 mm

Net weight 2.0 kg

Safety class /II

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

ENE039-1

Intended use

The tool is intended for impact drilling in brick, concrete

and stone as well as for drilling without impact in wood,

metal, ceramic and plastic.

ENF002-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated in accordance with European

Standard and can, therefore, also be used from sockets

without earth wire.

For Model HP1640,HP1641,HP1641F

ENG102-3

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

pA) : 92 dB (A)

Sound power level (L

WA) : 103 dB (A)

Uncertainty (K) : 3 dB (A)

Wear ear protection

ENG203-2

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Work mode: impact drilling into concrete

Vibration emission (ah,ID

) : 19 m/s2

Uncertainty (K) : 2.0 m/s2

ENG301-1

Work mode : drilling into metal

Vibration emission (ah,D) : 2.5 m/s

Uncertainty (K) : 1.5 m/s2

ENG901-1

•

The declared vibration emission value has been

measured in accordance with the standard test method

and may be used for comparing one tool with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

•

The vibration emission during actual use of the power

tool can differ from the declared emission value

depending on the ways in which the tool is used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-17

For European countries only

EC Declaration of Conformity

Makita declares that the following Machine(s):

Designation of Machine:

Hammer Drill

Model No./ Type: HP1640,HP1641,HP1641F

Conforms to the following European Directives:

2006/42/EC

They are manufactured in accordance with the following

Standard or standardized documents:

EN60745

The Technical file in accordance with 2006/42/EC is

available from:

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

Specyfikacje produktu

Marka:	Makita
Kategoria:	maszyna wiertnicza
Model:	HP1641FJ
Źródło zasilania:	Prąd przemienny
Wysokość produktu:	222 mm
Szerokość produktu:	72 mm
Głębokość produktu:	303 mm
Waga produktu:	1800 g
Długość kabla:	2 m
Model:	Wiertarka pistoletowa
Moc pobierana:	680 W
Średnica wiertła w betonie (max):	16 mm
Rodzaj zacisku:	Zamek centralny
Średnica wiertła w metalu (max):	13 mm
Średnica wiertła w drewnie (max):	30 mm
Prędkość biegu jałowego (max):	2800 RPM
Wiercenie udarowe:	Tak