Instrukcja obsługi Makita GA022GD202

Makita szlifierka GA022GD202

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita GA022GD202 (28 stron) w kategorii szlifierka. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/28
INSTRUCTION MANUAL
Cordless Angle Grinder
GA021G
GA022G
GA023G
GA024G
GA025G
GA026G
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: GA021G GA022G GA023G GA024G GA025G GA026G
Wheel diameter 100 mm
(4″)
115 mm
(4-1/2″)
125 mm
(5″)
100mm
(4″)
115 mm
(4-1/2″)
125 mm
(5″)
Max. wheel thickness 6.4 mm 7.2 mm 6.4 mm 7.2 mm
Spindle thread M10 M14 or 5/8″
(country specic)
M10 M14 or 5/8″
(country specic)
Rated speed (n) 8,500 min-1
Overall length with BL4025 413 mm
with BL4040 425 mm
Net weight
2.8 - 3.4 kg 3.0 - 3.6 kg 3.0 - 4.4 kg 2.8 - 3.4 kg 2.9 - 3.5 kg 2.9 - 4.4 kg
Rated voltage D.C. 36 V - 40 V max
Due to our continuing program of research and development, the specications herein are subject to change
without notice.
Specications may dier from country to country.
The weight may dier depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL4025 / BL4040
Charger DC40RA
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or re.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Wear safety glasses.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for grinding, sanding, wire brushing
and cutting of metal and stone materials without the use
of water.
Noise
The typical A-weighted noise level determined according to EN60745-2-3:
Model Sound pressure
level (LpA) : (dB(A))
Sound power level
(LWA) : (dB(A))
Uncertainty (K) :
(dB(A))
GA021G 81 92 3
GA022G 81 92 3
GA023G 81 92 3
GA024G 81 92 3
GA025G 81 92 3
GA026G 81 92 3
3 ENGLISH
NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual use of the power tool can dier from the declared val-
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched o and when it is running idle in addition to the trigger time).
Vibration
The vibration total value (tri-axial vector sum) determined according to EN60745-2-3:
Work mode: surface grinding with normal side grip
Model
Vibration emission (ah,
AG) : (m/s2)
Uncertainty (K) : (m/s2)
GA021G 5.0 1.5
GA022G 5.5 1.5
GA023G 6.5 1.5
GA024G 5.0 1.5
GA025G 5.5 1.5
GA026G 6.5 1.5
Work mode: surface grinding with anti vibration side grip
Model
Vibration emission (ah,
AG) : (m/s2)
Uncertainty (K) : (m/s2)
GA021G 5.5 1.5
GA022G 5.5 1.5
GA023G 5.5 1.5
GA024G 5.5 1.5
GA025G 5.5 1.5
GA026G 5.5 1.5
Work mode: disc sanding with normal side grip
Model
Vibration emission (ah,
AG) : (m/s2)
Uncertainty (K) : (m/s2)
GA021G 2.5 m/s2 or less 1.5
GA022G 2.5 m/s2 or less 1.5
GA023G 2.5 1.5
GA024G 2.5 m/s2 or less 1.5
GA025G 2.5 m/s2 or less 1.5
GA026G 2.5 1.5
Work mode: disc sanding with anti vibration side grip
Model
Vibration emission (ah,
AG) : (m/s2)
Uncertainty (K) : (m/s2)
GA021G 2.5 m/s2 or less 1.5
GA022G 2.5 m/s2 or less 1.5
GA023G 3.0 1.5
GA024G 2.5 m/s2 or less 1.5
GA025G 2.5 m/s2 or less 1.5
GA026G 3.0 1.5
NOTE: The declared vibration total value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also be used in a preliminary assessment of exposure.


Specyfikacje produktu

Marka: Makita
Kategoria: szlifierka
Model: GA022GD202

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Makita GA022GD202, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje szlifierka Makita

Makita

Makita GA9060R Instrukcja

14 Października 2024
Makita

Makita DGA700Z Instrukcja

12 Października 2024
Makita

Makita BBO180 Instrukcja

2 Października 2024
Makita

Makita 9557NB Instrukcja

2 Października 2024
Makita

Makita 9558HNR Instrukcja

2 Października 2024
Makita

Makita DBO484 Instrukcja

2 Października 2024
Makita

Makita CE002G Instrukcja

2 Października 2024
Makita

Makita GA022GD202 Instrukcja

2 Października 2024
Makita

Makita GA7063RX02 Instrukcja

2 Października 2024
Makita

Makita GA013GD101 Instrukcja

2 Października 2024

Instrukcje szlifierka

Najnowsze instrukcje dla szlifierka

HiKOKI

HiKOKI GP2S2 Instrukcja

15 Października 2024
Hitachi

Hitachi G 13SR Instrukcja

14 Października 2024
Einhell

Einhell NBG 150 Instrukcja

9 Października 2024
Einhell

Einhell TC-AG 100 Instrukcja

9 Października 2024
Einhell

Einhell MWS 115/2 Instrukcja

9 Października 2024
Einhell

Einhell RT-AG 230/180 Instrukcja

9 Października 2024
Einhell

Einhell WSE 230/5 Instrukcja

9 Października 2024
Einhell

Einhell TP-AG 1210 Instrukcja

9 Października 2024