Instrukcja obsługi Makita EK8100

Makita Maszyna do piłowania EK8100

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita EK8100 (32 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/32
Important:
Read this instruction manual carefully before putting the Power Cut into operation and strictly observe the
safety regulations!
Keep this instruction manual!
Instruction Manual
Original Instruction Manual
EK7300
EK7301
EK8100
2
Table of contents Page
Packing ................................................................................ 2
Delivery inventory .............................................................. 3
Symbols ...............................................................................3
SAFETY PRECAUTIONS
Intended use ................................................................... 4
General precautions ....................................................... 4
Protective equipment ...................................................4-5
Fuels / Refuelling ............................................................5
Putting into operation ...................................................... 5
Cutting discs ................................................................... 6
Kickback and lock-in ....................................................... 7
Working behavior / Method of working ............................ 7
Always observe the following when using
synthetic resin cutting discs ............................................. 8
Cutting metal ...................................................................8
Cutting masonry and concrete .....................................8-9
Transport and storage ..................................................... 9
Maintenance ................................................................. 10
First aid ......................................................................... 10
Disposal and environmental protection .........................10
Technical data ................................................................... 11
Denomination of components ......................................... 12
PUTTING INTO OPERATION
Mounting the cutting disc ............................................... 13
Tightening the V-belt / Checking V-belt tension ............ 14
Fuels / Refuelling .....................................................14-15
Starting the engine ........................................................16
Cold-starting .................................................................17
Warm-starting ............................................................... 17
Stop engine ...................................................................17
Adjusting the carburetor .................................................. 18
MAINTENANCE
Changing the V-belt ...................................................... 19
Cleaning the protection hood ........................................ 20
Cleaning / changing the air Þ lter ..............................20-21
Replacing the spark plug .............................................. 22
Replacing the suction head ..........................................22
Replacing the starter cable ........................................... 23
Replacing the return spring ...........................................24
Replacing / cleaning the spark arrester screen .............26
Instructions for periodic maintenance ........................... 28
Cutting attachment in central / side position ................. 25
Repositioning the cutting attachment ....................... 25-26
SPECIAL ACCESSORIES
Diamond cutting discs, trolley, water tank
and pressure water system ............................................27
Service, spare parts and guarantee ................................ 28
Troubleshooting ...............................................................29
Extract from spare parts list .......................................30-31
Accessories ..................................................................31
Packing
Your MAKITA Power Cut is packed in a cardboard box to pr e-
vent shipping damage.
Cardboard is a basic raw material and is consequently reuseable
or suitable for recycling (waste paper recycling).
Thank you for purchasing a MAKITA product!
Congratulations on choosing a MAKITA Power Cut cutoff saw!
We are conÞ dent that you will be satisÞ ed with this modern
piece of equipment. Like our chain saws, the MAKITA Power
Cuts feature specially designed high-performance engines
with outstanding power-to-weight ratios, for heavy-duty yet
lightweight tools.
Other advantages of the MAKITA Power Cuts:
• Sturdy construction and high reliability.
• Maintenance-free electronic ignition, hermetically sealed to
protect against dust and moisture.
• Vibration damping with the MAKITA 2-mass system (D2M) for
tireless working even when guiding the Power Cut by hand.
• Five-stage air-Þ lter system for reliable working even under
very dusty conditions.
• Two options for mounting the cutter attachment: Either cen-
trally, for good balance when guiding the unit manually, or on
the side, for ß ush cuts along walls or curbsides or horizontally
directly above the ground.
• Extensive range of resin-bonded and diamond grit cutting
discs, trolley with dust catcher, and systems for supplying
water to the disc.
The following industrial property rights apply: US 08510690,
SE 95027298, SE 95027306, IT 95000653, IT 95000654, GBM
9412558, GBM 9412559.
We want you to be satisÞ ed with your MAKITA product.
In order to guarantee the optimal function and performance of
your Power Cut and to ensure your personal safety we would
request you to perform the following:
Read this instruction manual carefully before putting the
Power Cut into operation for the Þ rst time, and strictly
observe the safety regulations! Failure to observe these
precautions can lead to severe injury or death!
EU Conformity Declaration
The undersigned, Tom as authorized by oyasu Kato, MAKITA
Corporation, declare that the MAKITA machines,
Type: 395, 328
Power Cut EK7300, EK7301 ( EK8100395), (328)
manufactured by MAKITA Corporation, 3-11-8 Sumiyoshi-Cho,
Anjo, Aichi, 446-8502 Japan, conforms to the basic safety and
health requirements of the applicable EU Directives:
EU Machinery Directive 2006/42/EG, EU EMC Directive
2004/108/ EG, Outdoor Noise Directive 2000/14/EG.
The most important standards applied to properly meet the re-
quirements of the above EU Directive were: EN 19432, CISPR
12, EN ISO 14982, DIN EN 61000-4. The conformity assess-
ment procedure 2000/14/EG was performed per Annex V. The
measured noise level (Lwa) is 114 dB(A). The guaranteed noise
level (Ld) is 115 dB(A).
The technical documentation is on Þ le at MAKITA International
Europe Ltd., Michigan Drive, Tongwell, Milton Keynes, Bucks,
MK15 8JD, England.
Anjo, 1.10.2012 for MAKITA Corporation
Tomoyasu Kato
Managing Director
3
6 5 4 3 2 1
Delivery inventory
1. Power Cut
2. Cutting disc (not in the general scope of delivery. Country-speciÞ c)
3. Adapter ring 20/25.4 (not in the general scope of delivery. Country-speciÞ c)
4. Screwdriver (for carburetor adjustment)
5. Offset screwdriver
6. Universal wrench 13/19
7. Instruction manual (not shown)
In case one of the parts listed should not be included in the
delivery inventory, please consult your sales agent.
Symbols
You will notice the following symbols on the Power Cut and in the Instruction Manual:
Read instruction manual and
follow the warning- and safety
precautions!
Particular care and caution!
Forbidden!
Wear helmet and eye, respiratory
and hearing protection!
Wear protective gloves!
Wear respiratory protection!
Hazardous dust and/or
gas emission!
Fire hazard from ß ying sparks!
No smoking!
No open Þ re!
Direction of cutting wheel rotation
Warning: the max. peripheral
speed of the cutting disc is 80 m/s!
Cutting disc dimensions
Never use circular saw blades!
Never use damaged cutting discs!
Combination switch
Choke, Start/Stop (I/O)
Starting procedure
(Press decompression valve,
Engine - manual start)
Stop engine!
Warning!
Kickback!
Fuel and oil mixture
First aid
Recycling
CE - Marking

Specyfikacje produktu

Marka: Makita
Kategoria: Maszyna do piłowania
Model: EK8100

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Makita EK8100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Maszyna do piłowania Makita

Makita

Makita DUC306PG2 Instrukcja

12 Stycznia 2025
Makita

Makita DJR187ZK Instrukcja

12 Grudnia 2024
Makita

Makita 5603 Instrukcja

15 Października 2024
Makita

Makita DJV181Z Instrukcja

12 Października 2024
Makita

Makita DUC353Z Instrukcja

8 Października 2024
Makita

Makita JR001GD202 Instrukcja

4 Października 2024
Makita

Makita BSS610 Instrukcja

2 Października 2024
Makita

Makita EA3502S Instrukcja

2 Października 2024
Makita

Makita DJV140 Instrukcja

2 Października 2024
Makita

Makita HS301DWAE Instrukcja

30 Września 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Husqvarna

Husqvarna 455e Rancher Instrukcja

12 Stycznia 2025
Güde

Güde GSS 400 Instrukcja

12 Stycznia 2025
HiKOKI

HiKOKI C 6BU3 Instrukcja

11 Stycznia 2025
DEDRA

DEDRA DED7060 Instrukcja

11 Stycznia 2025
Einhell

Einhell KGS 190 Instrukcja

11 Stycznia 2025
Sun Joe

Sun Joe SWJ599E Instrukcja

11 Stycznia 2025
Einhell

Einhell BT-MB 550 U Instrukcja

11 Stycznia 2025
Maruyama

Maruyama MCV51 Instrukcja

11 Stycznia 2025
Vonroc

Vonroc JS505DC Instrukcja

9 Stycznia 2025
PowerPlus

PowerPlus POWX53300T Instrukcja

9 Stycznia 2025